| "Trend Snappy Forstner Drill Bit 25mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 21.95 |
| "Trend CraftPro Bearing Guided Round Over and Ovolo Router Cutter 18.7mm 9.5mm 1/4""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 26.95 |
| "Trend Professional Wood Cutting Saw Blade 200mm 48T 30mm" |
| "This blade is lazer cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide ra..."
Price: 44.95 |
| "Draper Expert Flat Wood Bit 12mm 150mm" |
| "Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and ..."
Price: 2.95 |
| "Draper Expert Flat Wood Bit 6mm 150mm" |
| "Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and ..."
Price: 2.49 |
| "Trend Guided Rebater/Profiler 14/16Mmx25M" |
| "Two fluted for clean finish, nose bearing to rout a rebate, and shank bearing to profile edge flush. Ideal to remove damaged trim on tops to allow new trim to be added. Tungsten carbide tipped for abrasive materials and is ideal for use on timber and..."
Price: 42.95 |
| "Trend Snappy 5 Piece Forstner Drill Bit Set" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Diameters 15mm, 20mm, 25mm, 30mm and 35mm. Will also drill overlappi..."
Price: 91.95 |
| "Bosch U101 B Wood Cutting Jigsaw Blades Pack of 3" |
| "They are suitable for jigsaws with U-shanks (universal shanks) from all power tool brands. The U 101 B Clean for Wood Jigsaw Blade delivers clean straight cuts in wood. Its precision-ground teeth with a taper-ground body enable spotless results. Made..."
Price: 4.49 |
| "Trend CRAFTPRO Non Stick Wood Cutting Saw Blade 190mm 24T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip ..."
Price: 14.95 |
| "Trend Snappy Wood Auger Bit 22mm" |
| "Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. D: 22 mm OL: 155 mm Shank Diameter: 1/4 inch hex S..."
Price: 11.95 |
| "Trend Professional Aluminium and Plastic Cutting Saw Blade 235mm 60T 30mm" |
| "For non-ferrous metals or plastics. These blades have a negative hook angle. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Mi..."
Price: 99.95 |
| "Trend Desk Work Top Cable Tidy Inserts Grey 105mm" |
| "Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverplate. Cover plates can be removed to allow plugs to ..."
Price: 12.95 |
| "Trend Snappy Wood Auger Bit 13mm" |
| "Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. D: 13 mm OL: 155 mm Shank Diameter: 1/4 inch hex S..."
Price: 10.95 |
| "Trend Snappy TCT Counterbore Drill Bit 6.35mm 12.7mm" |
| "Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. D: 1/2 inch D: 12.7 mm D2: 1/4 inch D2: 6.35 mm C: 8 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 6.35 Dia Imperia..."
Price: 22.95 |
| "Trend Snappy Tin Coated Pozi Screwdriver Bits PZ2 25mm Pack of 20" |
| "A pack of 25mm Pozi insert bits. Forged bit for strength and longer life. They have a round shaft to reduce breakage giving excellent torque transmission and extended life time. Suit all types of screw applications in trade and industry. For use with..."
Price: 19.95 |
| "Trend Snappy 15 Piece Screwdriver Bit Set" |
| "Assorted screwdriver bit set for a wide range of applications. Colour rings on bit shank to denote type for ease of identification. Torsion zone round shaft to reduce breakage giving excellent torque transmission. Set contains fourteen 25mm insert bi..."
Price: 11.95 |
| "Trend Snappy Wood Auger Bit 12mm" |
| "Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. D: 12 mm OL: 155 mm Shank Diameter: 1/4 inch hex S..."
Price: 10.95 |
| "Trend Snappy Torx Screw Driver Bits T5 25mm Pack of 3" |
| "A pack of 25mm Torx insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting standards of accuracy. Suit all types of screw applications in trade and industry. Use on manual and machine a..."
Price: 5.49 |
| "Trend Snappy TCT Glass Drill Bit 4mm" |
| "TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. D: 4 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hexmm Dia Metric: 4..."
Price: 7.95 |
| "Trend Two Flute Worktop Jig Router Cutter 12.7mm 50mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen worktops. TC tips are ground with greater clearance for routi..."
Price: 32.95 |
| "Trend Desk Work Top Cable Tidy Inserts Black 105mm" |
| "Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverplate. Cover plates can be removed to allow plugs to ..."
Price: 12.95 |
| "Trend HR/JIG Worktop Hot Rod Jig" |
| "Routing jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surface Accepts hot rods of size 100mm, 200mm, 300mm and 400mm. Made from 12mm hardwearing CNC machined Compact Grade High Press..."
Price: 78.95 |
| "Trend Snappy Forstner Drill Bit 22mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 17.95 |
| "Trend Snappy Short Pozi Screwdriver Bit PZ2 17mm Pack of 3" |
| "Mini 17mm size No.2 Pozi bits for No.6, 8 & 10 screws. Three pack. Use with Trend Compact Angle Driver ref. SNAP/ASA/3. OL: 17 mm Size: No.2 Pozi Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 17 Type or Grade: ..."
Price: 4.49 |
| "Trend Snappy Torx Screw Driver Bits T10 25mm Pack of 3" |
| "A pack of 25mm Torx insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting standards of accuracy. Suit all types of screw applications in trade and industry. Use on manual and machine a..."
Price: 5.49 |
| "Trend CraftPro Bearing Guided Round Over and Ovolo Router Cutter 51mm 25mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 48.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 10mm 19.1mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 25/64 inch D: 10 mm C: 25 mm OL: 59.5 mm Shank ..."
Price: 13.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.55mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.55 mm C: 1 inch C: 25.4 mm OL: 6..."
Price: 13.95 |
| "Trend Professional Wood Cutting Saw Blade 190mm 36T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 56.95 |
| "Trend 16 Piece Snappy Hex Drill Bit Set" |
| "Hex shank drill bit set in fabric tool holder for drilling wood, plastics and metals. Eight HSS fully ground TiN coated twist drill bits, sizes 2, 2.5, 3, 4, 5, 6, 7 and 8mm for wood, metal and plastic. Eight carbon steel dowel (Brad point) roll flut..."
Price: 26.95 |
| "Starrett XA014C Carbide Tipped Pilot Drills for Hole Saw Arbors" |
| "Starrett's XA014C is a carbide tipped pilot drill bit which is suitable for use with all CT, MPH and D series hole saws and is compatible with all Starrett hole saw arbors. Specifications • Model: XA014C • Fits Starrett Arbors: All..."
Price: 15.95 |
