| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 41.3mm 19mm 1/2""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. D1: 41.3 mm C: 3/4 inches C: 19.1 mm B:..."
Price: 45.95 |
| "Trend CRAFTPRO Bearing Guided Classic Broken Ogee Router Cutter 22mm 10mm 1/4""" |
| "Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. D: 22 mm C: 25/64 inch C: 10 mm B: 22 mm R: 2.4 mm OL: 61.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metr..."
Price: 38.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 2.5mm 8mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D1: 2.5 mm C: 8 mm OL: 49 mm Shank Dia.: 1/4 inch ..."
Price: 13.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 14mm 19mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 35/64 inch D: 14 mm C: 3/4 inch C: 19 mm OL: 59..."
Price: 15.95 |
| "Trend Chamfer Bearing Guided Router Cutter 31.8mm 12mm 1/2""" |
| "Ideal for newel posts and caps for stairs. Supplied with one bearing. D: 31.8 mm C: 12 mm C2: 16 mm B: 9.5 mm A: 45 degrees OL: 60 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 31.8 Dia Imperial: 1 1/4 Cut Length Metric: ..."
Price: 54.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 25mm 19mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 63/64 inch D: 25 mm C: 3/4 inch C: 19 mm OL: 59..."
Price: 19.95 |
| "Trend Router Plug Maker 16mm 16mm 1/4""" |
| "These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. D: 16 mm C: 16 mm OL: 55 mm Shank Diameter: 1/4 inch Body: 22 mm Shank Diameter: 1/4 Dia M..."
Price: 44.95 |
| "Trend Replacement Cutter Bearings Metric OD 18mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 10.95 |
| "Trend Acrylic Spiral Upcut Router Cutter 6mm 19mm 1/4""" |
| "Up-cut helical gives long lasting super fine finish. D: 15/64 inch D: 6 mm C: 3/4 inch C: 19 mm Shank Diameter: 1/4 inch OL: 59 mm Shank Diameter: 1/4 Dia Metric: 6 Dia Imperial: 15/64 Cut Length Metric: 19 Cut Length Imperial: 3/4 Ov..."
Price: 47.95 |
| "Trend Mortar Groove Large Chamfer Router Cutter 41mm 22.5mm 1/2""" |
| "Use for producing mortar grooves and for bevelling applications. D: 41 mm C: 22.5 mm C2: 23 mm A: 45 degrees OL: 60.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 41 Cut Length Metric: 22.5 Overall Length Metric: 60.5 An..."
Price: 49.95 |
| "Trend Quad Groover Blade 47.6mm 1.6mm 1/2""" |
| "Replacement groover for QUADX1/2TC. D: 1 7/8 inch D: 47.6 mm E: 12.8 mm Kerf: 1.6 mm No. of Teeth: 2 Dia Metric: 47.6 Dia Imperial: 1 7/8 Rebate Metric: 12.8 Saw Kerf Metric: 1.6 Saw Teeth: 2..."
Price: 13.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6.3mm 19.1mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/4 inch D: 6.3 mm C: 3/4 inch C: 19.1 mm OL: 6..."
Price: 9.95 |
| "Trend CRAFTPRO Chamfer V Grovve Router Cutter 18.4mm 17mm 1/2""" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. D: 3/4 inch D: 19 mm C: 11 mm C2: 13 mm C3: 9 mm A: 45 degrees OL: 54.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric..."
Price: 17.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6.3mm 25.4mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/4 inch D: 6.3 mm C: 1 inch C: 25.4 mm Ol: 76 ..."
Price: 11.95 |
| "Trend Classic Style Bearing Guided Router Cutter 29mm 12.7mm 1/4""" |
| "Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. D: 29 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm B2: 12.7 mm R: 4 ..."
Price: 44.95 |
| "Trend Large Bearing Guided Ogee Panel Raiser Router Cutter 50mm 14mm 1/2""" |
| "Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match ou..."
Price: 70.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 38mm 19mm 1/4""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 56.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 28mm 12.7mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 49.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.1mm 25.4mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 9/32 inch D: 7.1 mm C: 1 inch C: 25.4 mm OL: 67..."
Price: 11.95 |
| "Trend Replacement Cutter Bearings Metric OD 42mm" |
| "Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. OD: 42 mm ID: 12 mm Thickness: 10 mm Cut Length Metric: 10 Bearing Dia Metric: 42 Sawbore: 12..."
Price: 12.95 |
| "Trend Large Flat Roman Ogee Router Cutter 50mm 6.5mm 1/2""" |
| "Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. D: 50 mm C: 6.5 mm C2: 11.5 mm R: 20 mm R2: 12 mm OL: 51.8 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 50 Cut Length Metr..."
Price: 72.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 18.7mm 9.5mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 44.95 |
| "Trend SNAPPY HSS Drill bit 5/32""" |
| "Replacement drill bit. D1: 5/32 inches D1: 3.96 mm OL: 82 mm Dia Metric: 3.96 Dia Imperial: 5/32 Overall Length Metric: 82..."
Price: 1.95 |
| "Trend CRAFTPRO Wood Cutting Cordless Saw Blade 136mm 24T 10mm" |
| "Thin kerf sawblades for cordless saws. Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraz..."
Price: 13.95 |
| "Trend TCT No Scriber Hinge Sinking Bit 35mm 3/8""" |
| "These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. D: 35 mm OL: 65 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 3..."
Price: 50.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 38mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 1/2 inch C: 38 mm OL: ..."
Price: 19.95 |
| "Trend Solid Tungsten Carbide Mini Burrs 6mm 12mm 3mm" |
| "Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. D: 6 mm C: 12 mm..."
Price: 25.95 |
| "Trend TCT Through Drill 201 Series Left Hand Rotation 10mm 25mm 10mm" |
| "Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting screw. ..."
Price: 26.95 |
| "Trend Sunk Bead Router Cutter 22mm 10mm 1/4""" |
| "Gives a narrow appearance to a board edge. D: 22 mm C: 10 mm R: 3 mm OL: 39 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 22 Cut Length Metric: 10 Overall Length Metric: 39 Radius 1 Metric: 3..."
Price: 53.95 |
| "Trend CRAFTPRO Bearing Guided Bevel Trimmer Router Cutter 25.4mm 10mm 1/4""" |
| "Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. D: 1 inch D: 25.4 mm C: 25/64 inch C: 10 mm A: 60 degrees OL: 50 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 25.4 Dia Imperial: 1 Cut Length..."
Price: 19.95 |
| "Trend Snappy Hex Shank Masonry Drill Bit 6mm" |
| "Tungsten Carbide Tipped masonry drill to suit wall plugs. D: 6 mm OL: 120 mm Flute length: 58 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric: 6 Overall Length Metric: 120..."
Price: 4.49 |
