| "Trend STC Spiral Upcut Router Cutter 7.9mm 12.7mm 1/2""" |
| "Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plu..."
Price: 98.95 |
| "Trend TRADE RANGE Staggered Mortise Router Cutter 16mm 1/2""" |
| "For deep mortising & grooving giving good chip clearance. Will plunge to a depth of 70mm in a number of passes. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by ..."
Price: 35.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 10mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 25/64 inch D: 10 mm C: 25 mm OL: 69 mm Shank Di..."
Price: 15.95 |
| "Trend CRAFTPRO Bearing Guided Shoulder Profile Router Cutter 33.5mm 9mm 1/4""" |
| "For door and window construction, decorative panelling and many other joinery applications. D: 33.5 mm C: 9 mm B: 9.5 mm R: 9 mm OL: 64 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 33.5 Cut Length Metric: 9 Overall Length..."
Price: 45.95 |
| "Trend CRAFTPRO Bearing Guided Groove Router Cutter 12.7mm 12.7mm 1/4""" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. D1: 1/2 inches D1: 12.7 mm C: 1/2 inches C: 12.7 mm C2: 9 mm C3: 6 mm OL: 52.5 mm B: 12.7 mm A: 45 degrees Shank Diameter: 1/4 Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imp..."
Price: 21.95 |
| "Trend Router Collet Reduction Sleeve 12mm 6mm" |
| "Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work. D: 12 mm OL: 30 mm ..."
Price: 14.95 |
| "Trend Replacement Cutter Bearings Metric OD 25mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 9.5mm 19.1mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 3/8 inch D: 9.5 mm C: 3/4 inch C: 19.1 mm OL: 6..."
Price: 11.95 |
| "Trend Mortar Groove Large Chamfer Router Cutter 38mm 27mm 1/2""" |
| "Use for producing mortar grooves and for bevelling applications. D: 38 mm C: 27 mm C2: 25.5 mm A: 60 degrees OL: 65 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 38 Cut Length Metric: 27 Overall Length Metric: 65 Angle: 60..."
Price: 53.95 |
| "Trend Guided Economy LaminateTrimmer Router Cutter 6.3mm 6mm 1/4""" |
| "Solid Tungsten Carbide economy cutter. Self guiding at 83 degrees with Ref. S48/41. The guide length is 3mm. D: 1/4 inch D: 6.3 mm C: 6 mm OL: 38 mm A: 83 degrees Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 6.3 Dia Imperial..."
Price: 31.95 |
| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 34.9mm 19.1mm 1/4""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. D1: 34.9 mm C: 3/4 inches C: 19.1 mm B:..."
Price: 38.95 |
| "Trend Slow Spiral HSS Twist Drill 3/8""" |
| "Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. These drills are not for use with routers and not suitable for masonry work. D: 3/8 inch D: 9.5 mm OL: 130 mm Shank ..."
Price: 20.95 |
| "Trend WS Plug Maker 7/8"" 1/2""" |
| "Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to ..."
Price: 86.95 |
| "Trend SNAPPY HSS Drill bit 1/4""" |
| "Replacement drill bit. D: 1/4 inch D: 6.3 mm OL: 99 mm Dia Metric: 6.3 Dia Imperial: 1/4 Overall Length Metric: 99..."
Price: 3.49 |
| "Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 31.9mm 22.5mm 1/4""" |
| "Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. D: 31.9 mm D2: 28.6 mm C: 22.5 mm B: 16 mm R: 7 mm OL: 72.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 31.9 Dia2 Metric: 28..."
Price: 37.95 |
| "Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 11mm M12 Thread" |
| "These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. D: 50 mm Bore: M12 Kerf: 11 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: M12 Saw Kerf Metric: 11 Saw Teeth: 4..."
Price: 67.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.5mm 25.4mm 1/4""" |
| ...
Price: 14.95 |
| "Trend TRADE Bearing Guided Trimmer Router Cutter 6.35MM 25.4mm 1/4""" |
| "For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used..."
Price: 17.95 |
| "Trend Keyhole Slotter Router Cutter 12.7mm 4.9mm 1/4""" |
| "A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable for grooving applications. D: 12.7 mm D2: 8 mm S: 4.6 mm C: 4.9 mm OL: 38.1 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia..."
Price: 34.95 |
| "Trend Finger Jointer Bearing Guided Router Cutter 24.6mm 18.5mm 1/4""" |
| "A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. D: 24.6 mm C: 18.5 mm OL: 58 mm B: 12.7 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 24.6 Cut Length Metric: 18.5 Overall Len..."
Price: 56.95 |
| "Trend Aqua 63 Weatherseal Strip Brown 25m" |
| "Weather strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone..."
Price: 51.95 |
| "Trend Bearing Guided Rebater Router Cutter 35mm 12.7mm 1/2""" |
| "Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Has a 60mm shank length to give access to deep rebates. When using be..."
Price: 74.95 |
| "Trend Ovolo Rounding Over Router Cutter 22mm 12mm 1/2""" |
| "Some Ovolo cutters can be used with radius cutters, to make rule joints. D: 22 mm D2: 12 mm C: 12 mm R: 5 mm OL: 50.1 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 22 Dia2 Metric: 12 Cut Length Metric: 12 Overall Length ..."
Price: 45.95 |
| "Trend Corner Bead Bearing Guided Router Cutter 23mm 20mm 1/4""" |
| "Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. TCT featuring Dnamic carbide with extended life for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes gi..."
Price: 49.95 |
| "Trend Caravan Ind Guided Pierce and Trim Single Fliute Router Cutter 12.7mm 30mm 1/2""" |
| "Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted. D: 12.7 mm C: 30 mm OL: 89 mm Shank Diameter: 1/2 inch Shank Length: 34 mm Shank Diameter:..."
Price: 31.95 |
| "Trend Economy Trimmer STC Router Cutter 6.3mm 6.3mm 1/4""" |
| "Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introduced. Solid tungsten carbide economy cutter. For use on short runs at 90 degrees or 45 deg..."
Price: 31.95 |
| "Trend CRAFTPRO Raised Panel Ogee Router Cutter 50mm 12mm 8mm" |
| "Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass...."
Price: 50.95 |
| "Trend Roughing Spiral Phenolic Router Cutter 6.35MM 25.4mm 1/4""" |
| "Solid carbide spiral roughing tool to rout composite materials including phenolics, carbon fibre, fibreglass and Trespa. Unique grinding and multi-flute design. Suitable for roughing cuts in hard and abrasive material. Roughing cuts are for bulk remo..."
Price: 52.95 |
| "Trend CRAFTPRO Aluminium and Plastic Cutting Saw Blade 305mm 84T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain tr..."
Price: 34.95 |
| "Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 2.8mm 1/2""" |
| "Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. D: 36 mm C: 2.8 mm OL: 80 mm ..."
Price: 37.95 |
| "Trend CRAFTPRO Radius Router Cutter 9.5mm 6.3mm 1/4""" |
| "These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. D: 3/8 inch D: 9.5 mm C: 1/4 inch C: 6.3 mm R: 4.8 mm OL: 46.5 mm Shank Diameter: 1/4 ..."
Price: 16.95 |
