 |
| Luxello Modern Neutra House Numbers LED Backlit |
| $128.00 |
| Luxello Neutra Modern 8 inch House Numbers feature a backlit LED illuminated casing provides clear and visible address...[Read More] |
 |
| "XSPC PETG Chamfer Tool" |
| "Quickly chamfer the edges of PETG tubing by using this handy tool Just insert the tubing and turn anticlockwise Specification - Dimensions 477mm x 477 x 41mm"
Price: 7.99 |
| "EK Water Blocks EK-AF Angled 90 Degrees G1 / 4 inch Black nickel" |
| "EK-AF (Adapter Fitting) Revolvable angled adaptor (90°) with G14" threads Adapter allows connection of fitting with G14" threads to extend tubing possibilites in your water cooled system Specifications - Material made of nickel plated brass - Threads G14" BSP; 45mm male thread length G14" BSP 6mm female thread length - Outer diameter of a knurled part 198mm - Installed height 28mm - Sealed with high quality NBR oring ROHS compliant! Please note - All AF Angled adapters are hand polished and rounded therefore minor geometrical imperfections are to be expected This fact does not fall under warranty terms and RMA rights!"
Price: 8.99 |
| "Arctic Silver 5 Thermal Compound (3.5g)" |
| "Arctic Silver 5 Thermal Compound is a High-Density Polysynthetic Silver Thermal Compound With its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles Arctic Silver 5 provides a new level of performance and stability Available at Arctic Silver resellers worldwide Arctic Silver 5 is the reference premium thermal compound Arctic Silver 5 is optimized for a wide range of bond lines between modern high-power CPUs and high performance heatsinks or water-cooling solutions Features Made With 999 Pure Silver Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer High-Density Arctic Silver 5 contains over 88 thermally conductive filler by weight In addition to micronized silver Arctic Silver 5 also contains sub-micron zinc oxide aluminum oxide and boron nitride particles These thermally-enhanced ceramic particles improve the compound&39;s performance and long-term stability Controlled Triple-Phase Viscosity Arctic Silver 5 does not contain any silicone The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases As it comes from the syringe Arctic Silver 5&39;s consistency is engineered for easy application During the CPU&39;s initial use the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks Those pads melt each time they get hot then re-solidify when they cool The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective) Not Electrically Conductive Arctic Silver 5 was formulated to conduct heat not electricity (While much safer than electrically conductive silver and copper greases Arctic Silver 5 should be kept away from electrical traces pins and leads While it is not electrically conductive the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths) Absolute Stability Arctic Silver 5 will not separate run migrate or bleed Compliancy RoHS Compliant Specifications Average Particle Size <049 micron <0000020 inch Extended Temperature Limits Peak –50°C to >180°C Long-Term –50°C to 130°C Performance 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core Coverage Area A 35 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores or 6 to 10 large CPU cores or 2 to 5 heat plates At a layer 0003" thick the 35 gram syringe will cover approximately 16 square inches "
Price: 8.52 |
| "EK Water Blocks EK-AF Angled 45 Degrees G1 / 4 inch Black" |
| "EK-AF (Adapter Fitting) Revolvable angled adaptor (45°) with G14" threads Adapter allows connection of fitting with G14" threads to extend tubing possibilites in your water cooled system Specification - Material made of black coated brass - Threads G14" BSP; 45mm male thread length G14" BSP 6mm female thread length - Outer diameter of a knurled part 198mm - Installed height 29mm - Sealed with high quality NBR oring ROHS compliant! Please note - All AF Angled adapters are hand polished and rounded therefore minor geometrical imperfections are to be expected This fact does not fall under warranty terms and RMA rights!"
Price: 9.49 |
| "EK Water Blocks EK-AF Angled 90 Degrees G1 / 4 inch Black" |
| "EK-AF (Adapter Fitting) Revolvable angled adaptor (90°) with G14" threads Adapter allows connection of fitting with G14" threads to extend tubing possibilites in your water cooled system Specifications - Material made of black coated brass - Threads G14" BSP; 45mm male thread length G14" BSP 6mm female thread length - Outer diameter of a knurled part 198mm - Installed height 28mm - Sealed with high quality NBR oring ROHS compliant! Please note - All AF Angled adapters are hand polished and rounded therefore minor geometrical imperfections are to be expected This fact does not fall under warranty terms and RMA rights!"
Price: 10.49 |
| "ANTEC 0-761345-10109-7 ISK110 VESA GB Mini ITX U3 version" |
| "Going small shouldn&39;t mean sacrificing form or function The ISK110 VESA is crafted for small efficient builds without compromises Just 78 mm wide and mounted on a stable clip-on base or included VESA mount it fits two 25" drive bays - perfect for internal SSDs Perforated mesh construction and space for a low-profile CPU cooler provide an ample amount of quiet cooling capability An incredibly small yet powerful 90 watt adapter completes the package providing power with up to 92 efficiency Ideal for corporate builds kiosks and digital signage the ISK110 VESA is a miniscule case solution with massive features Features • VESA mount included • 2 x 25" internal drive bays • ABS plastic 08 mm SECC construction • Includes standard case lock slot for integrated anti-theft protection • Front ports - 4 x USB 30 - HDAAC&39;97-compatible audio inout • Motherboard compatibility Mini-ITX only • Includes 90 watt external adapter - Efficiency up to 92 - DC-to-ATX PCB mounted directly inside case - Universal Input — works on any 100V - 240V electrical grid • No expansion slots • Dimensions (chassis only) - 222 mm (H) x 78 mm (W) x 212 mm (D) - 87" (H) x 31" (W) x 84" (D) • Dimensions (with VESA) - 226 mm (H) x 85 mm (W) x 212 mm (D) - 89" (H) x 34" (W) x 84" (D) • Packaging Dimensions - 260 mm (H) x 125 mm (W) x 340 mm (D) - 102" (H) x 49" (W) x 134" (D) • Net Weight 13 kg (29 lbs) • Gross Weight 22 kg (49 lbs)"
Price: 104.99 |
| "Mayhems Pastel Dark Grey 1L" |
| "Mayhems Pastel range of coolants are the worlds No 1 branded Nano Coolant bar none for water cooling enthusiasts They have been developed with co-operation between Ice Dragon Cooling and Mayhems This range of liquid coolants surpasses anything in the market place with its outstanding colours and cooling power Mayhems pastel range incorporates many differing technologies into one product from dyes to Nano technology and of course a little Mayhems magic With a system working life of about two years of which is due to a design that is intended for prolonged use Properties & Benefits - Foil Sealed Anti tamper evident technology - Can be used with all of Mayhems Dyes to make your own colours - Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper Brass Steel Nickel and Aluminium - Proven to ASTM D3306 and BS6580 standards - Very low oral toxicity less than propylene glycol - Contains all the biocides you will ever need - -8c freezing point - Mobilises to prevent scale or sludge filming - Boiling Point up to 95° C (pressure dependent) - Can be stored for up to three years within in a cool dry environment - Made in the UK - Mayhems 1 Ltr no longer come with spout Before Using Mayhems Pastel range The system must be clean and have no chemicals of any kind left in the loop There must be an absence of bleach biocide and anti-corrosive inhibitors We recommend you flush your system with Mayhems Blitz kit before use Mayhems Pastel has biocides and inhibitors included within the mixture Warning Contains Zinc Oxide Do not dispose of down the drain This is harmful to the environment Please dispose of in safe appropriate manner Store in a cool dry place out of reach of children and animals If swallowed do NOT induce vomiting unless directed to do so by medical personnel Disclaimer- Not For Use with Thermaltake Aluminium Radiators Mayhems internal testing has seen severe issues with Thermaltake Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators"
Price: 14.99 |
| "EK Water Blocks EK-ACF Fitting 13/19mm Black Nickel" |
| "EK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting designed for use with flexible soft tubing such as PVC EPDM Norprene silicone or any other type of compatible flexible tube EK-ACF Fitting is a more secure variant of the tubing connector as the locking ring prevents the flexible tube from being pulled out of the fitting The barb is made of nickel-plated CNC machined brass and the ring is made of anodized CNC machined aluminium The fittings feature quality rubber O-rings and are fully compatible with EK-AF series (45°90°) angled adapters Technical data - thread G14" BSP; 45mm male thread lenght - supported tube IDOD 12" 34" (roughly equals to 1319mm) - outer diameter of a fitting 24mm - installed height 200mm - compatible tubing PVC EPDM Norprene silicone most types of flexible tube ROHS Compliant! Made in Slovenia - Europe! PLEASE NOTE - This fitting is to be used only with correctly sized tubing! - Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage! - Do not use any tools to secure locking ring to the fitting barb"
Price: 7.99 |
| "Mayhems Pastel Light Grey 1L" |
| "Mayhems Pastel range of coolants are the worlds No 1 branded Nano Coolant bar none for water cooling enthusiasts They have been developed with co-operation between Ice Dragon Cooling and Mayhems This range of liquid coolants surpasses anything in the market place with its outstanding colours and cooling power Mayhems pastel range incorporates many differing technologies into one product from dyes to Nano technology and of course a little Mayhems magic With a system working life of about two years of which is due to a design that is intended for prolonged use Properties & Benefits - Foil Sealed Anti tamper evident technology - Can be used with all of Mayhems Dyes to make your own colours - Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper Brass Steel Nickel and Aluminium - Proven to ASTM D3306 and BS6580 standards - Very low oral toxicity less than propylene glycol - Contains all the biocides you will ever need - -8c freezing point - Mobilises to prevent scale or sludge filming - Boiling Point up to 95° C (pressure dependent) - Can be stored for up to three years within in a cool dry environment - Made in the UK - Mayhems 1 Ltr no longer come with spout Before Using Mayhems Pastel range The system must be clean and have no chemicals of any kind left in the loop There must be an absence of bleach biocide and anti-corrosive inhibitors We recommend you flush your system with Mayhems Blitz kit before use Mayhems Pastel has biocides and inhibitors included within the mixture Warning Contains Zinc Oxide Do not dispose of down the drain This is harmful to the environment Please dispose of in safe appropriate manner Store in a cool dry place out of reach of children and animals If swallowed do NOT induce vomiting unless directed to do so by medical personnel Disclaimer- Not For Use with Thermaltake Aluminium Radiators Mayhems internal testing has seen severe issues with Thermaltake Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators"
Price: 14.49 |
| "Phanteks Enthoo Pro M Midi Tower Case with Window Black" |
| "The ENTHOO PRO M focuses on delivering great design without compromising price Water-cooling builds will be a simple task with the help of our innovative radiator bracket and pump mounting locations Whether you are a system builder or water-cooling enthusiast the PRO M will give you unlimited possibilities Enthoo Pro M includes 1 x 140mm fan in the rear Ability to upgrade to additional fans is possible All fans included are Phanteks’ new redesigned and better performing SP series fans FEATURES - Brushed aluminum look - Clean interior - Hidden PSU and HDD’s - Optimal airflow - Direct airflow to CPU GPU - Comes with 1 Phanteks premium fan - 1x PH-F140SP in rear (140mm) - 3 different installation areas for radiators (120mm or 140mm form factor) - Reservoir mounting locations - 1x Drop-N-Lock SSD brackets included - Removable HDD cage for installation of long PSU’s (>180mm) waterpump - Equipped with removable dustfilters (1x front 1x bottom 1x top magnetic) - Clean cable management using Phanteks&39; preinstalled Hoop-N-Loop cable ties - Removable optical drive cage SPECIFICATIONS - Dimension 235 mm x 480 mm x 500 mm (W x H x D) 925 in x 189 in x 197 in - Colour Black - Form Factor Midtower Chassis - Material(s) Plastic Exterior Steel Chassis - Motherboard Support E-ATX (up to 264mm wide) ATX Micro ATX Mini ITX - Front IO 2x USB 30 Mic Headphone Reset - Side Window Yes - Expansion slots 7 - Internal 35" 8x (2x included) - Internal 25" (dedicated) 3x (1x included) - Cooling 120mm Fan - Front 2x (3x without ODD Cage) Top 3x Rear 1x - Cooling 140mm Fan - Front 2x Top 2x Rear 1x - Liquid Cooling 120mm Radiator - Front Up to 360mm Top Up to 360mm Rear 120mm - Liquid Cooling 140mm Radiator - Front Up to 280mm Top Up to 280mm Rear 140mm - Graphic card Clearance 420 mm (1654 in) No HDD brackets 300 mm (118 in) HDD brackets installed - PSU Clearance 318 mm (125 in) - CPU cooler Clearance 194 mm (76 in) - Cable management 35 mm (138 in) - Memory clearance (motherboard - fan) 120mm 68 mm (268 in) 140mm 48 mm (189 in) - Package Dimension 315 mm x 545 mm x 585 mm (WxHxD) - Net Weight 74 kg (154 lbs) - Gross Weight 90 kg (198 lbs) - Warranty 5 Years Case type Midi-Tower Form Factor E-ATX ATX Micro-ATX Mini-ITX Side panel Windowed Colour Black Main colour Black Accent colour Black Noise dampening No Width (exact) 235 Height (exact) 480 Depth (exact) 500 Width 200 - 300 mm Height 400 - 500 mm Depth 400 - 500 mm Material Plastic Steel Weight 6 - 8 kg USB 2x USB 30 2x Audio output 1x Audio input 1x Internal 25" bays 4x Internal 35" bays 2x External 525" bays 1x PCI slots 7x Motherboard tray no Remote no Cable management yes Front LCDTFT display no Filter yes Power supply no Power supply format ATX Power supply position Rear Lower Fans pre-installed 1x 140mm 120mm Fan 7 140mm Fan 5 Fan colour Black White Fan controller no Card reader no Front door no Hot-swap no Position IO Sideways HDD anti-vibration yes Radiator-mounting 1x Single (120mm) 1x Single (140mm) 2x Dual (280mm) 2x Triple (360mm) Lighting no"
Price: 91.99 |
| "BitFenix Neos ATX Tower Black/Black Window" |
| "Simple yet stylish feature-rich yet affordable Neos is the ideal PC chassis for value seekers and first-time builders The elegantly crafted mesh front panel brings a clean and uncluttered look to the chassis while bringing a splash of color to brighten up any computing space Users can look forward to dedicated 35" and 25" drive racks and compatibility with graphics cards up to 30cm long Neos makes installation easy with tool-free mechanisms and dual dust filters mean quick cleanup To enable quick file transfers Neos even comes equipped with a high-speed USB port Brimming with niceties like an aluminum BitFenix logo badge and a powder-coated interior Neos brings a colorful and smart design at an eminently affordable price point Play With Colour Designing a chassis that blends into any environment yet allows for personal customization was no easy feat Neos achieves this through a simple yet sophisticated design that comes in a variety of mesh colors to suit individual tastes Available in both black and white models Neos is a case that lets users choose the color scheme that best suits their own personal style Enhanced Airflow The mesh adorning the front of Neos isn&39;t merely cosmetic Large mesh holes allow for unencumbered airflow to your system components ensuring that your PC runs as cool as it looks Ample Expansion The well thought-out internal layout of Neos enables ample opportunities for expansion Dedicated 35" and 25" drive racks cover your system storage and also allow room for long graphics cards up to 30cm in length Expansion cards can be installed with the seven available PCI slots and optical drives can be added to the two 525" drive bays Incredible Extras Neos offers features that are generally reserved for cases twice the price including dual removable dust filters for both the front intake and the power supply that keep dust away from your system components The rolled-edge cable pass-throughs prevent cable damage during installation while the aluminum finish BitFenix logo on the front just oozes quality Offering premium features at a paltry price Neos is the new benchmark for value cases Specification - Materials Steel Plastic - Color (IntExt) BlackBlack - Dimensions (WxHxD) 185 x 429 x 470 - Motherboard Sizes Mini-ITX mATX ATX - 525" Drive Bays 2 - 35" Drive Bays 3 - 25" Drive Bays 3 - Cooling Front 2 x 120mm (optional) - Cooling Rear 1 x 120mm White LED (included) - PCI Slots 7 - IO 1 x USB30 1 x USB20 HD Audio - Power Supply PS2 ATX (bottom multi direction) - Extras Features Front Dust Filter PSU Dust Filter Tool-Free Drive Locking Side Window"
Price: 53.49 |
| "Thermaltake Versa C22 Mid Tower Case with Side Window & RGB LED" |
| "Versa C22 RGB - Perfectly designed for gamers the new Versa C22 RGB Mid-Tower chassis features a sleek appearance and an extraordinary thermal performance The light of the built-in RGB LED illumination is visible from all angles Users can add a personal touch with 7 vibrant colours The enlarged transparent window offers a direct view of the inner system Additionally the Versa C22 RGB comes with a power cover and supports up to a standard ATX motherboard Most importantly the spacious interior design not only provides plenty of space for cable management but also allows users to install the latest PC hardware AIO and DIY liquid cooling solutions Tt LCS Certified - Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis&39;s have been tested to be the best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitments Gorgeous RGB LED Illumination - With 7 distinctively gorgeous illumination display colours the Versa C22 RGB is an ideal chassis for those who want to show their style and personality in a subtle manner The light is visible from all angles Users can use the LED controller on the top panel to switch between three different lighting schemes including single colour mode (red green blue yellow cyan purple and white) RGB blink mode and breathing light mode Fully Modular Concept - The fully modular drive cages minimise the hassles of installation and removal Especially the 35 inch & 25 inch drive bay is applied to give the case a tool-less design that allows users to freely interchange the hard-drives to suit their particular needs The dual drive bay concept of 2 plus 2 offers a good ratio for accessories and storage devices Handy IO Ports - The top-front panel is designed with two USB 30 data transfer ports along with two standard USB 20 ports and a LED controller to grant direct access when needed Superior Hardware Support - The Versa C22 RGB supports motherboards up to standard ATX a tower CPU cooler with a maximum height of 160mm and a dual expansion slot VGA of up to 390mm in length without the front fan Moreover with the tool-free design users can easily mount up to two 35 inch 25 inch (with HDD tray) and two 25 inch (with the MB tray) storage devices into the build at the same time"
Price: 90.49 |
| "Aerocool CS1101 Black Mini Tower Micro ATX 1 x 80mm Rear Fan 2 x USB2 1 x USB3" |
| "With vents in the front panel and grooved lines across the face of this case this sturdy Corporate Series all black mid-tower supports ATX micro ATX and mini-ITX motherboards The compact design of this lightweight case accommodates up to three 35? HDDs and a 25? HDDSSD The spacious interior design supports a CPU cooler up to 150mm in height and a high-end long graphics card up to 375mm (350mm with front fan or 375mm without front fan) At the same time providing extra space on the side panel for cable management All black exterior case Supports high-end graphics card up to 375mm Supports CPU cooler up to 150mm Supports up to 3 x 35inch HDD and 1 x 25inch HDDSSD USB30 x 1 USB20 x 2 HD Audio & Mic"
Price: 33.49 |
| "CiT 1016 Gloss Black/Silver Micro ATX Case 500W PSU" |
| "Stylish case design Front USB 20 ports (x 2) Front HD Audio & Microphone port"
Price: 54.49 |
| "XSPC EC6 Non Conductive Coolant Green UV" |
| "XSPC - EC6 is a high performance Eco-friendly coolant for PC watercooling based on a blend of refined vegetable extracts with non-toxic corrosion inhibitors and non-toxic UV dyes It offers superb protection for copper brass steel nickel & aluminium and has even been tested with a range of acetal and acrylic plastics EC6 has a high thermal conductivity is electrically non-conductive and with its range of intense bright UV colours it&39;s the perfect coolant for PC water-cooling The coolant ships in a natural colour 1 Litre HDPE bottle which has a high flow easy pour neck and comes complete with a secure and child proof "click twist" cap so you can be 100 sure there has been no contamination to your new coolant and it can&39;t get into the wrong hands The non toxic UV dyes in EC6 are stable and are designed not to separate or stain your tubing over time EC6 is produced and bottled in the UK under the strictest quality control measures Pre-mixed with No Need for Additional Additives - Ships ready for use Corrosion protection for Copper Brass Steel Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards Prevents build up of Algae & growth within in your liquid cooled system Electrical Conductivity <2?Scm at 24C (most competitors struggle to reach <10?Scm) Non-Toxic and RoHS Compliant"
Price: 12.99 |
| "CiT F3 Black Micro-ATX Case With 12cm Blue LED Fan & Blue Stripe" |
| "Micro-ATX tower case - Micro-ATX tower Case with plastic top cover The Front panel and top panel incorporates mesh steel for increased airflow Complete with 1 x USB 30 2 x USB 20 HD Audio and Card reader all conveniently positioned at the top of the case to allow easier access for the user The stylised window along with the LED fans and internal cable management allow the user to create a unique and tidy look to their PC With its outstanding design of black with blue accents along with rolled edges for safety Top IO Ports - 1 x USB 30 2 x USB 20 HD Audio & Card Reader Micro-ATX tower PC case Side Window - Stylised side window Increased Air Flow - Top & Front panel incorporate mesh paneling to improve air flowplastic and mesh steel Cooling system - Up to 4 x 120mm fan (2 x LED fans inc) Chassis - Black powder coated interior to complete the stylish look"
Price: 46.99 |
| "EK Water Blocks EK-HDC Fitting 12mm G1/4 Black" |
| "EK-HDC Fitting is a solid-tube compression fitting designed for use with solid tubing such as Acrylic Copper Stainless Steel or any other type of compatible hard tube EK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring The barb is made of black nickel-plated CNC machined brass while the ring is made of black-chrome plated CNC machined brass and feature quality O-rings These fittings are fully compatible with EK-CSQ series (45°90°) angled adapters Technical data thread G14" BSP; 45mm male thread lenght supported tube 12mm (OD) outer diameter of a fitting 188mm installed height 17mm compatible tubing solid Acrylic- Copper- Brass- or Stainless Steel tube ROHS Compliant!"
Price: 8.99 |
| "EK Water Blocks Thermal PAD F 10mm - (120x16mm)" |
| "Replacement thermal conductive pad for use with EK water blocks Along with thermal conductivity it provides great elasticity and elongation with natural tack on one side Can be used multiple times thus offering great reworkability and electrical insulation Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block Thermal conductivity 35 WmK ( -035) General dimensions Type F (120 x 16 mm) Thickness 10 mm Working Temperature -55 200°C Hardness 5 (Shore A) Elongation 100 Specific Gravity 26 gcm3 ( - 02) Flame Rating V-0 Dielectric Breakdown Voltage >4kV Volume Resistance > 1011 Ohm-m Main ingredient Aluminum oxide (Al2O3) 85-95"
Price: 4.99 |
| "Phanteks Evolv ITX Glass Mini-ITX Case Black" |
| "Over the last few years Phanteks and the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality and unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCE Timeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting and integrated controls 2x USB 30 ports behind the front panel Space for 280 mm radiators and pumps Space for CPU coolers up to 20 cm in height and graphics cards up to 33 cm in length Clean and sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASE The moment you set eyes upon this sleek and timeless case it&39;s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) and high (375 cm) as its popular predecessors The interior of the case like the right side of the case consists of painted black steel the removable front panel is made of plastic but comes adorned with a large powder-coated steel panel The large tempered-glass side panel on the left side makes this case somewhat unique At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows and can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLING Located towards the rear is a pre-installed 140 mm fan and two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case and the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the "Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives ( CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an mITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage Additionally an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket and use the additional pump bracket in the lower section of the front as long as the system only requires a single large and quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6 kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black Form-Factor Mini-ITX Total Possible Fans 2x 140120 mm (Front) 1x 140120 mm (Rear) 2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 dB(A)) Radiator Mountings (partly dependent upon HDD- andor fan slots) 1x max 240 mm (Front) 1x max 140120 mm (Rear) 1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25" PSU 1x Standard ATX (optional) Expansion Slots 2 IO Panel 2x USB 30 (internal connection) 1x Audio InOut RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage)"
Price: 98.99 |
| "Phanteks Evolv ITX Glass Mini-ITX Case Black/Red" |
| "Over the last few years Phanteks and the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality and unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCE Timeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting and integrated controls 2x USB 30 ports behind the front panel Space for 280 mm radiators and pumps Space for CPU coolers up to 20 cm in height and graphics cards up to 33 cm in length Clean and sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASE The moment you set eyes upon this sleek and timeless case it&39;s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) and high (375 cm) as its popular predecessors The interior of the case like the left side panel of the case consists of black painted steel but in this revision the motherboard tray divider drive cage and PSU shroud shine through the tempered glass side panel in a radiant high-contrast red At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows and can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLING Located towards the rear is a pre-installed 140 mm fan and two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case and the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the "Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives ( CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an mITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage Additionally an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket and use the additional pump bracket in the lower section of the front as long as the system only requires a single large and quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6 kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black red Form-Factor Mini-ITX Total Possible Fans 2x 140120 mm (Front) 1x 140120 mm (Rear) 2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 dB(A)) Radiator Mountings (partly dependent upon HDD- andor fan slots) 1x max 240 mm (Front) 1x max 140120 mm (Rear) 1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25" PSU 1x Standard ATX (optional) Expansion Slots 2 IO Panel 2x USB 30 (internal connection) 1x Audio InOut RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage)"
Price: 98.49 |
| "Phanteks Evolv ITX Glass Mini-ITX Case White" |
| "Over the last few years Phanteks and the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality and unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCE Timeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting and integrated controls 2x USB 30 ports behind the front panel Space for 280 mm radiators and pumps Space for CPU coolers up to 20 cm in height and graphics cards up to 33 cm in length Clean and sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASE The moment you set eyes upon this sleek and timeless case it&39;s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) and high (375 cm) as its popular predecessors The interior of the case like the left side panel of the case consists of black painted steel but in this revision the motherboard tray divider drive cage and PSU shroud shine through the tempered glass side panel in a radiant high-contrast red At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows and can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLING Located towards the rear is a pre-installed 140 mm fan and two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case and the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the "Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives ( CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an mITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage Additionally an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket and use the additional pump bracket in the lower section of the front as long as the system only requires a single large and quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6 kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black red Form-Factor Mini-ITX Total Possible Fans 2x 140120 mm (Front) 1x 140120 mm (Rear) 2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 dB(A)) Radiator Mountings (partly dependent upon HDD- andor fan slots) 1x max 240 mm (Front) 1x max 140120 mm (Rear) 1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25" PSU 1x Standard ATX (optional) Expansion Slots 2 IO Panel 2x USB 30 (internal connection) 1x Audio InOut RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage)"
Price: 105.99 |
| "EK Water Blocks EK-ACF Fitting 13/19mm Red" |
| "EK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting designed for use with flexible soft tubing such as PVC EPDM Norprene silicone or any other type of compatible flexible tube EK-ACF Fitting is a more secure variant of the tubing connector as the locking ring prevents the flexible tube from being pulled out of the fitting The barb is made of nickel-plated CNC machined brass and the ring is made of anodized CNC machined aluminium The fittings feature quality rubber O-rings and are fully compatible with EK-AF series (45°90°) angled adapters Technical data thread G14" BSP; 45mm male thread lenght supported tube IDOD 12" 34" (roughly equals to 1319mm) outer diameter of a fitting 24mm installed height 200mm compatible tubing PVC EPDM Norprene silicone most types of flexible tube ROHS Compliant! Made in Slovenia - Europe! PLEASE NOTE This fitting is to be used only with correctly sized tubing! Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage! Do not use any tools to secure locking ring to the fitting barb"
Price: 7.99 |
| "EK Water Blocks EK-ACF Fitting 13/19mm Blue" |
| "EK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting designed for use with flexible soft tubing such as PVC EPDM Norprene silicone or any other type of compatible flexible tube EK-ACF Fitting is a more secure variant of the tubing connector as the locking ring prevents the flexible tube from being pulled out of the fitting The barb is made of nickel-plated CNC machined brass and the ring is made of anodized CNC machined aluminium The fittings feature quality rubber O-rings and are fully compatible with EK-AF series (45°90°) angled adapters Technical data thread G14" BSP; 45mm male thread lenght supported tube IDOD 12" 34" (roughly equals to 1319mm) outer diameter of a fitting 24mm installed height 200mm compatible tubing PVC EPDM Norprene silicone most types of flexible tube ROHS Compliant! Made in Slovenia - Europe! PLEASE NOTE This fitting is to be used only with correctly sized tubing! Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage! Do not use any tools to secure locking ring to the fitting barb"
Price: 8.99 |
| "Prolimatech PK-1 Nano Thermal Compound (5g)" |
| "The Prolimatech PK-1 Nano Aluminium Thermal Compound is thermal compound that is entirely environmentally safe and recyclable Even with that being said it is at the head of the pack as far as performance and is very easy to apply Excellent long-term stability Non-electronically conductive Non-corrosive Easy to apply and less to use No "burn-in" time required Low dry-out"
Price: 9.99 |
| "BitFenix Neos ATX Tower Black/Blue Window" |
| "Simple yet stylish feature-rich yet affordable Neos is the ideal PC chassis for value seekers and first-time builders The elegantly crafted mesh front panel brings a clean and uncluttered look to the chassis while bringing a splash of color to brighten up any computing space Users can look forward to dedicated 35" and 25" drive racks and compatibility with graphics cards up to 30cm long Neos makes installation easy with tool-free mechanisms and dual dust filters mean quick cleanup To enable quick file transfers Neos even comes equipped with a high-speed USB port Brimming with niceties like an aluminum BitFenix logo badge and a powder-coated interior Neos brings a colorful and smart design at an eminently affordable price point Play With Colour Designing a chassis that blends into any environment yet allows for personal customization was no easy feat Neos achieves this through a simple yet sophisticated design that comes in a variety of mesh colors to suit individual tastes Available in both black and white models Neos is a case that lets users choose the color scheme that best suits their own personal style Enhanced Airflow The mesh adorning the front of Neos isn&39;t merely cosmetic Large mesh holes allow for unencumbered airflow to your system components ensuring that your PC runs as cool as it looks Ample Expansion The well thought-out internal layout of Neos enables ample opportunities for expansion Dedicated 35" and 25" drive racks cover your system storage and also allow room for long graphics cards up to 30cm in length Expansion cards can be installed with the seven available PCI slots and optical drives can be added to the two 525" drive bays Incredible Extras Neos offers features that are generally reserved for cases twice the price including dual removable dust filters for both the front intake and the power supply that keep dust away from your system components The rolled-edge cable pass-throughs prevent cable damage during installation while the aluminum finish BitFenix logo on the front just oozes quality Offering premium features at a paltry price Neos is the new benchmark for value cases Specification Materials Steel Plastic Color (IntExt) BlackBlue Dimensions (WxHxD) 185 x 429 x 470 Motherboard Sizes Mini-ITX mATX ATX 525" Drive Bays 2 35" Drive Bays 3 25" Drive Bays 3 Cooling Front 2 x 120mm (optional) Cooling Rear 1 x 120mm Blue LED (included) PCI Slots 7 IO 1 x USB30 1 x USB20 HD Audio Power Supply PS2 ATX (bottom multi direction) Extras Features Front Dust Filter PSU Dust Filter Tool-Free Drive Locking Side Window"
Price: 53.49 |
| "Thermal Grizzly Kryonaut High Performance Thermal Paste - 11.1g / 3 ml" |
| "Thermal Grizzly Kryonaut Thermal Paste was specially developed for extremely demanding applications and the most demanding of Overlocking community Kryonaut also recommended as a top product for critical cooling systems for industrial use Kryonaut uses a special support structure with no drying processes and starts at 80 ° C This support structure ensures that the contained nano-aluminum and tin oxide portions of the paste combine perfectly and so any unevenness of the heat output (eg the CPU) and a heat sink are optimally compensated with outstanding thermal conductivity Features - Designed especially for overclocking - Excellent thermal conductivity - No cure time - High long-term stability Ideal Applications Thermal Conductivity 5 Extreme Overclocking 5 Overclocking 5 Watercooling 5 Air cooling 5 Silicone Sensitive Applications Do Not Use Specification - Thermal Conductivity 125 wm k - Viscosity 120-170 Pas - Spec Weight 37 g cm3 - Temperature -200 ° C 350 ° C - Content 111g 3 ml"
Price: 24.50 |
| "BitFenix Solid Front Panel for Prodigy Case Black/Pink" |
| "Customise and improve your favourite Mini ITX case with the new range of Solid Front Panels for your BitFenix Prodigy Case - Solid Front Panel - Easy to install 4 push clips! - Make your system unique and tailor it to your personality"
Price: 23.49 |
| "EK Water Blocks EK-ACF Fitting 12/16mm Nickel" |
| "EK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting designed for use with flexible soft tubing such as PVC EPDM Norprene silicone or any other type of compatible flexible tube EK-ACF Fitting is a more secure variant of the tubing connector as the locking ring prevents the flexible tube from being pulled out of the fitting The barb is made of nickel-plated CNC machined brass and the ring is made of anodized CNC machined aluminium The fittings feature quality rubber O-rings and are fully compatible with EK-AF series (45°90°) angled adapters Technical data thread G14" BSP; 45mm male thread lenght supported tube IDOD 716" - 58" (roughly equals to 1216mm) outer diameter of a fitting 22mm installed height 156mm compatible tubing PVC EPDM Norprene silicone most types of flexible tube ROHS Compliant! Made in Slovenia - Europe! PLEASE NOTE This fitting is to be used only with correctly sized tubing! Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage! Do not use any tools to secure locking ring to the fitting barb"
Price: 8.99 |
| "BitFenix Neos ATX Tower Black/Red Window" |
| "Simple yet stylish feature-rich yet affordable Neos is the ideal PC chassis for value seekers and first-time builders The elegantly crafted mesh front panel brings a clean and uncluttered look to the chassis while bringing a splash of color to brighten up any computing space Users can look forward to dedicated 35" and 25" drive racks and compatibility with graphics cards up to 30cm long Neos makes installation easy with tool-free mechanisms and dual dust filters mean quick cleanup To enable quick file transfers Neos even comes equipped with a high-speed USB port Brimming with niceties like an aluminum BitFenix logo badge and a powder-coated interior Neos brings a colorful and smart design at an eminently affordable price point Play With Colour Designing a chassis that blends into any environment yet allows for personal customization was no easy feat Neos achieves this through a simple yet sophisticated design that comes in a variety of mesh colors to suit individual tastes Available in both black and white models Neos is a case that lets users choose the color scheme that best suits their own personal style Enhanced Airflow The mesh adorning the front of Neos isn&39;t merely cosmetic Large mesh holes allow for unencumbered airflow to your system components ensuring that your PC runs as cool as it looks Ample Expansion The well thought-out internal layout of Neos enables ample opportunities for expansion Dedicated 35" and 25" drive racks cover your system storage and also allow room for long graphics cards up to 30cm in length Expansion cards can be installed with the seven available PCI slots and optical drives can be added to the two 525" drive bays Incredible Extras Neos offers features that are generally reserved for cases twice the price including dual removable dust filters for both the front intake and the power supply that keep dust away from your system components The rolled-edge cable pass-throughs prevent cable damage during installation while the aluminum finish BitFenix logo on the front just oozes quality Offering premium features at a paltry price Neos is the new benchmark for value cases Specification Materials Steel Plastic Color (IntExt) BlackRed Dimensions (WxHxD) 185 x 429 x 470 Motherboard Sizes Mini-ITX mATX ATX 525" Drive Bays 2 35" Drive Bays 3 25" Drive Bays 3 Cooling Front 2 x 120mm (optional) Cooling Rear 1 x 120mm Red LED (included) PCI Slots 7 IO 1 x USB30 1 x USB20 HD Audio Power Supply PS2 ATX (bottom multi direction) Extras Features Front Dust Filter PSU Dust Filter Tool-Free Drive Locking Side Window Case type Midi-Tower Form Factor ATX Micro-ATX Mini-ITX Side panel Windowed Colour Black Main colour Black Width (exact) 185 Height (exact) 429 Depth (exact) 470 USB 1x USB 30 1x Internal 25" bays 3x Internal 35" bays 3x External 525" bays 2x PCI slots 7x Power supply format ATX Fans pre-installed 1x 120mm 120mm Fan 3"
Price: 53.49 |
| "EK Water Blocks EK-ACF Fitting 12/16mm Black Nickel" |
| "EK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting designed for use with flexible soft tubing such as PVC EPDM Norprene silicone or any other type of compatible flexible tube EK-ACF Fitting is a more secure variant of the tubing connector as the locking ring prevents the flexible tube from being pulled out of the fitting The barb is made of nickel-plated CNC machined brass and the ring is made of anodized CNC machined aluminium The fittings feature quality rubber O-rings and are fully compatible with EK-AF series (45°90°) angled adapters Technical data thread G14" BSP; 45mm male thread lenght supported tube IDOD 716" - 58" (roughly equals to 1216mm) outer diameter of a fitting 22mm installed height 156mm compatible tubing PVC EPDM Norprene silicone most types of flexible tube ROHS Compliant! Made in Slovenia - Europe! PLEASE NOTE This fitting is to be used only with correctly sized tubing! Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent water block damage! Do not use any tools to secure locking ring to the fitting barb"
Price: 8.99 |
