 |
| Luxello Modern Neutra House Numbers LED Backlit |
| $128.00 |
| Luxello Neutra Modern 8 inch House Numbers feature a backlit LED illuminated casing provides clear and visible address...[Read More] |
 |
| "EK Water Blocks EK-Cable Y-Splitter 3-Fan DC (10cm)" |
| "EK-Cable Y-Splitter 3-Fan DC is a simple adapter used to hook three DC fans to one motherboard 4-pin PWM or 3-pin DC FAN connector Specifications- Connect three (DC) fans from one (DC or PWM) fan header- Compatible with 3-pin DC fans and fan connectors - Fully sleeved cables (total length 100mm)- RoHS compliant"
Price: 6.99 |
| "EK Water Blocks EK-AF Extender 12mm F-F G1/4 - Black" |
| "EK-AF Extender 12mm F-F is suitable to connect two fittingsAdapters with male G14 threads For example PVC tube Fitting on one side and HardRigid Acrylic tube fitting on other side Maximum lenght of the G14 thread of the FittingsAdapters is 6mm Made from black plated CNC machined brass Technical data- Threading G 14"- Thread length 12mm- Diameter 188mm- Height 12mm"
Price: 6.49 |
| "EK Water Blocks EK-HDC Fitting 12mm G1/4 - Green" |
| "EK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring The barb is made of black nickel-plated CNC machined brass while the ring is made of red anodized CNC machined aluminum and feature quality O-rings These fittings are fully compatible with EK-AF series (45°90°) angled adapters Best practice is to install these fittings using Allen Key 9mm (not included)Technical data- thread G14" BSP; 45mm male thread lenght- supported tube 12mm (OD)- outer diameter of a fitting 19mm- installed height 12mm- compatible tubing solid Acrylic- Copper- Brass- or Stainless Steel tube"
Price: 9.49 |
| "EK Water Blocks EK-AF Pass-Through G1/4 - Black" |
| "EK-AF Pass-Through Fitting is panel mounted adapter fitting with female G14" BSP threads on both sides of the fitting allowing easier liquid interconnection between different chassis compartments This Adapter Fitting is secured to the panel with the enclosed grip nut Made from chrome-plated CNC machined brass Specification- Threading 2 x G 14" (Female - Female)- Thread length 14mm- Diameter 250mm- Height 140mmROHS 20 compliant!"
Price: 7.99 |
| "EK Water Blocks EK-HDC Fitting 12mm G1/4 - Purple" |
| "EK-HDC Fitting is a solid-tube compression fitting designed for use with solid tubing such as Acrylic Copper Stainless Steel or any other type of compatible hard tubeEK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring The barb is made of black nickel-plated CNC machined brass while the ring is made of red anodized CNC machined aluminum and feature quality O-rings These fittings are fully compatible with EK-AF series (45°90°) angled adapters Best practice is to install these fittings using Allen Key 9mm (not included)Technical data- thread G14" BSP; 45mm male thread lenght- supported tube 12mm (OD)- outer diameter of a fitting 19mm- installed height 12mm- compatible tubing solid Acrylic- Copper- Brass- or Stainless Steel tubeROHS Compliant!"
Price: 9.49 |
| "Akasa AK-TC5022 High Performance Thermalpaste" |
| "The Akasa AK-TC5022 high performance thermal compound is a newly developed silicone paste which ensures a consistent and reliable thermal performance Technical details- Quantity 35 grams- Thermal Resistance 0061cm ² C W 40PSI- Thermal conductivity 40 W mK- Scope - 45 ° C and 200 ° C degrees- Pad for applying the paste- Manual English French German Spanish Russian"
Price: 10.49 |
| "Coollaboratory Liquid Pro Liquid Metal Thermal Paste 1gram" |
| "Coollaboratory Liquid Pro is the first heat conducting medium which is worthy of its name It is the first heat conduction paste that consists of 100 liquid metal alloy It is liquid at room temperature (like mercury) but it is absolutly nontoxic and has a high moistening ability for several materials The Coollaboratory Liquid Pro is especially recommend for nickel-plated copper Coollaboratory Liquid Pro contain no non-metallic additives (like silicone oxides etc) at all It also does not contain any solid particles Due to these properties Coollaboratory Liquid Pro surpasses the best high performance heat conducting pastes by a multiple "
Price: 9.50 |
| "EK Water Blocks EK-AF T-Splitter 3F G1/4 - Black" |
| "EK-AF T-Splitter is a simple cube-shaped adapter fitting with 3 x G14" BSP threads useful for splitting or combining the liquid flow in your loopMade from black painted hand polished brass Technical data- Threading 3 x G 14" (All Female)- Thread length 70mm- Dimensions 24x24x21mm (WxDxH)"
Price: 10.99 |
| "Thermal Grizzly Aeronaut High Performance Thermal Paste - 1.5ml / 3.9g" |
| "The Aeronaut thermal compound is an ideal entry-level product with very good efficiency where performance demands are not at their highest Aeronaut provides the end user with high surface protection and good thermal conductivity Aeronaut is ideal for users who want to effectively optimize their air cooling system or replace the stock thermal compound that was delivered with their hardware Aeronaut is designed to provide an outstanding Price-performance ratio Although the proportion of the metallic elements compared to other products in the Thermal Grizzly range is slightly lower the Aeronaut provides a reliable high-performance thermal compound which is ideal for system builders looking for a hard wearing and durable thermal material that performs consistently well In the laboratory test Aeronaut shows a very long resistance at high temperatures and is gentle on the surface - no micro-scratches are compared in the removal of the thermal grease left on the cooling surfaces Features- Excellent thermal conductivity- High long-term stability- No Cure TimeIdeal ApplicationsThermal Conductivity 3Extreme Overclocking 1Overclocking 2Water cooling 4Air cooling 4Silicone Sensitive Applications Do Not UseSpecification- Thermal Conductivity 85 WM K- Viscosity 110-160 Pas- Spec Weight 24 g cm3- Temperature -150 ° C 200 ° C- Content 15ml 36g"
Price: 10.49 |
| "Arctic Silver Alumina Thermal Paste (14g)" |
| "Arctic Alumina™ Premium Ceramic Thermal CompoundIntroducing Arctic Alumina Thermal Compound The first ceramic-based polysynthetic thermal compound for use between modern high-power CPUs and high performance heatsinks or water-cooling solutions FeaturesPremium Ceramic ContentArctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer This exclusive combination provides performance exceeding most metal based compounds Controlled Triple Phase ViscosityArctic Alumina does not contain any silicone The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases As it comes from the syringe Arctic Alumina&39;s consistency is engineered for easy application in a thin even layer During the CPU&39;s initial use the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability NOTE (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks Those pads melt each time they get hot then re-solidify when they cool The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective)Absolute StabilityArctic Alumina will not separate run migrate or bleed Electrical InsulatorArctic Alumina does not contain any metal or other electrically conductive materials It is a pure electrical insulator neither electrically conductive nor capacitive Performance2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core Easy Clean UpArctic Alumina can easily be cleaned from CPUs and heatsinks with ArctiClean isopropyl alcohol or any of the cleaners listed in the product instructions Compliancy RoHS2 Compliant Specifications- Average Particle Size<039 micron <0000015 inch (65 particles lined up in a row equal 11000th of an inch - Temperature LimitsPeak –40°C to >160°CLong-Term –40°C to 125°C- Coverage Area14-gram syringe (Approximately 9cc)At a layer 0003" thick one syringe will cover about 192 square inches"
Price: 9.99 |
| "Arctic Silver Alumina Thermal Paste (1.75g)" |
| "Arctic Alumina™ Premium Ceramic Thermal CompoundIntroducing Arctic Alumina Thermal Compound The first ceramic-based polysynthetic thermal compound for use between modern high-power CPUs and high performance heatsinks or water-cooling solutions FeaturesPremium Ceramic ContentArctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer This exclusive combination provides performance exceeding most metal based compounds Controlled Triple Phase ViscosityArctic Alumina does not contain any silicone The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases As it comes from the syringe Arctic Alumina&39;s consistency is engineered for easy application in a thin even layer During the CPU&39;s initial use the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability NOTE (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks Those pads melt each time they get hot then re-solidify when they cool The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective)Absolute StabilityArctic Alumina will not separate run migrate or bleed Electrical InsulatorArctic Alumina does not contain any metal or other electrically conductive materials It is a pure electrical insulator neither electrically conductive nor capacitive Performance2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core Easy Clean UpArctic Alumina can easily be cleaned from CPUs and heatsinks with ArctiClean isopropyl alcohol or any of the cleaners listed in the product instructions Compliancy RoHS2 Compliant Specifications- Average Particle Size<039 micron <0000015 inch (65 particles lined up in a row equal 11000th of an inch - Temperature LimitsPeak –40°C to >160°CLong-Term –40°C to 125°C- Coverage Area175-gram syringe (Approximately 1cc)At a layer 0003" thick one syringe will cover about 24 square inches"
Price: 7.49 |
| "Prolimatech PK-2 Nano Aluminium Thermal Paste - 5g" |
| "When putting down nothing beats smooth and easy That is why we created the PK-2 thermal compound The PK-2 thermal compound is a high performance thermal bonding agent specially designed for easy applicationPK-2&39;s core feature is its low viscosity allowing for one to quickly and easily apply the thinnest coat of thermal compound possibleThis will get your components up close and personal in no time • Easy Application• Easy Application• Low Dry-Out• Non-Corrosive• Electrically Non-Conductive• Wide range of application temperatureOne Syringe of thermal compound amd one easy-to-spread spoon"
Price: 12.99 |
| "XSPC 5060175585110 Chrome hardware cooling accessory" |
| "Easy tool free coin installationSpecification- Chrome Finish- For 716 ID 58 OD Tubing (111mm ID 16mm OD)- Low profile design- G14 Thread "
Price: 7.99 |
| "EK Water Blocks EK-AF Extender 12mm F-F G1/4 - Black Nickel" |
| "EK-AF Extender 12mm F-F is suitable to connect two fittingsAdapters with male G14 threads For example PVC tube Fitting on one side and HardRigid Acrylic tube fitting on other side Maximum lenght of the G14 thread of the FittingsAdapters is 6mm Made from black plated CNC machined brass Technical data- Threading G 14"- Thread length 12mm- Diameter 188mm- Height 12mm"
Price: 6.49 |
| "EK Water Blocks EK-AF Extender 20mm M-M G1/4 - Nickel" |
| "EK-AF Extender 20mm M-M is a simple male-threaded extender interconnect for connecting two water cooling components with female G14 threads together Made from nickel-plated CNC machined brass Sealed with quality orings Technical data- Threading 2 x G 14" (Male - Male)- Thread length 40mm- Diameter 188mm- Height 20mm"
Price: 7.49 |
| "EK Water Blocks EK-AF Extender 30mm M-F G1/4 - Black Nickel" |
| "EK-AF Extender G14 is suitable to extend port from block in order to fasten larger fittings that would normally be obstructed by hardware or you simply wish to extend your G14 port Made from black-plated CNC machined brass Sealed with quality orings These Extenders can be either tightened by hand or by using Allen Key 9mm (not included)Technical data- Threading G 14"- Thread length 4mm- Diameter 188mm- Height 30mmROHS 20 compliant!"
Price: 7.49 |
| "Bitspower BP-BSWP-CT hardware cooling accessory Black" |
| "This is the finest made temp Sensor fitting we have ever offered! This is a special stop fitting that can be used to measure the temperature of your water cooling loop by fitting in any G 14" threaded port in your reservoir or block with an extra port for installation Learn the name; Bitspower Premium water cooling products!FeaturesSpecial Design for PC Water Cooling Temperature DetectFit All Temperature Display DevicePerfect Surface treatmentHidden O-Ring DesignSpecificationsMaterial Hi Quality Brass with Black Sparkle coating Thread G14"Temp Range -30 - 105CWire Length 900MMSingle 2-PINs"
Price: 11.99 |
| "EK Water Blocks Thermal PAD E 10mm - (RAM 8X)" |
| "Replacement thermal conductive pad for use with EK water blocks Along with thermal conductivity it provides great elasticity and elongation with natural tack on one side Can be used multiple times thus offering great reworkability and electrical insulation Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block Thermal conductivity 35 WmK ( -035)General dimensions Type E (50 x 25 mm) - precut to 8 piecesThickness 10mmWorking Temperature -55 200°CHardness 5 (Shore A)Elongation 100Specific Gravity 26 gcm3 ( - 02)Flame Rating V-0Dielectric Breakdown Voltage >4kVVolume Resistance > 1011 Ohm-mMain ingredient Aluminum oxide (Al2O3) 85-95"
Price: 5.99 |
| "EK Water Blocks EK-AF Pass-Through G1/4 - Nickel" |
| "EK-AF Pass-Through Fitting is panel mounted adapter fitting with female G14" BSP threads on both sides of the fitting allowing easier liquid interconnection between different chassis compartments This Adapter Fitting is secured to the panel with the enclosed grip nut Made from chrome-plated CNC machined brass Specification- Threading 2 x G 14" (Female - Female)- Thread length 14mm- Diameter 250mm- Height 140mmROHS 20 compliant!"
Price: 7.99 |
| "EK Water Blocks EK-AF Extender Rotary M-M G1/4 - Black" |
| "EK-AF Extender Rotary M-M G14 a simple male-threaded revolvable extender interconnect for connecting two water cooling components with female G14 threads together and allows you to spin them independently from each other Made from black chrome-plated CNC machined brass Sealed with quality orings These Extenders are to be tightened by hand Technical data- Threading 2 x G 14" (Male - Male)- Thread length 40mm- Diameter 188mm- Height 160mm"
Price: 8.49 |
| "Bitspower Crystal Link Tube 12/10mm Length 1000mm - Clear" |
| "Bitspower None Chamfer Crystal Link Tube-Length 1000mmFeatures- Only Compatible With Bitspower Fitting C47C48ML Series - Used before be cut in right length and have champher be finished - Universal Link Tube- RoHS Compliant Specification- Dimension ( FxH ) 12 x 1000 MM ( -3) "
Price: 6.99 |
| "EK Water Blocks EK-Duraclear Tubing 13/10 - Clear 3M" |
| "EK-DuraClear is the most advanced liquid cooling tubing designed and manufactured for the most demanding customers who want to use soft tubing in their builds The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems making it the top choice for every liquid cooling enthusiast More than 2 years in development the goal was to create the most durable flexible and transparent tube on the market EK-DuraClear has very smooth inner walls and such surface inhibits particulate gathering or entrapment onto the tubing wall thus reducing the potential for bacterial growth and contamination Tested in the most extreme environments the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks EK-DuraClear has one of the best bend ratios on the market resisting twisting and collapsing when doing a tight turn in your liquid cooling build Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever Unlike the matte black EK ZMT Tube EK-DuraClear is "glass-like" transparent tube designed to be used with EK-Ekoolant cooling liquids Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware To achieve the best longevity and maintaining the tubing shine we recommend you only use this tube with coolants and EK-ACF 1013mm fittings bought from our web shop Features- Highly durable- "Glass-like" transparency- Superior UV Transmission- Logo Free (no print on tube)- Inner Wall resilience- Environmentally responsible safe and non-toxic productTechnical Specifications- Material PVC- Color Clear not UV-reactive (resistant to UVA & UVB)- Length 3 meters- Operating temperature range -20°C to 80°COther Specifications- DEHP Free- Phthalate Free- California’s Prop 65 compliant- FDA Approved ingredients- ROHS Compliant PVCDimensions- Internal diameter (ID) 95 mm (38")- Outer diameter (OD) 127 mm (12")Recommended fittings - EK-ACF Fitting 1013mm"
Price: 18.99 |
| "Koolance Hose Clamp for OD 10mm (3/8in)" |
| "Reusable Hose Clamp for connecting 10mm (38") OD tubing to Koolance nozzle barbs Specification- OD 10mm (38")- Wall 5mm (0197")"
Price: 4.99 |
| "EK Water Blocks EK-Duraclear Tubing 16/11 - Clear 3M" |
| "EK-DuraClear is the most advanced liquid cooling tubing designed and manufactured for the most demanding customers who want to use soft tubing in their builds The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems making it the top choice for every liquid cooling enthusiast More than 2 years in development the goal was to create the most durable flexible and transparent tube on the market EK-DuraClear has very smooth inner walls and such surface inhibits particulate gathering or entrapment onto the tubing wall thus reducing the potential for bacterial growth and contamination Tested in the most extreme environments the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks EK-DuraClear has one of the best bend ratios on the market resisting twisting and collapsing when doing a tight turn in your liquid cooling build Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever Unlike the matte black EK ZMT Tube EK-DuraClear is "glass-like" transparent tube designed to be used with EK-Ekoolant cooling liquids Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware To achieve the best longevity and maintaining the tubing shine we recommend you only use this tube with coolants and EK-ACF 1013mm fittings bought from our web shop Features- Highly durable- "Glass-like" transparency- Superior UV Transmission- Logo Free (no print on tube)- Inner Wall resilience- Environmentally responsible safe and non-toxic productTechnical Specifications- Material PVC- Color Clear not UV-reactive (resistant to UVA & UVB)- Length 3 meters- Operating temperature range -20°C to 80°COther Specifications- DEHP Free- Phthalate Free- California’s Prop 65 compliant- FDA Approved ingredients- ROHS Compliant PVCDimensions- Internal diameter (ID) 111 mm (716")- Outer diameter (OD) 159 mm (58")Recommended fittings - EK-ACF Fitting 1216mm"
Price: 20.99 |
| "EK Water Blocks EK-Duraclear Tubing 16/10 - Clear 3M" |
| "EK-DuraClear is the most advanced liquid cooling tubing designed and manufactured for the most demanding customers who want to use soft tubing in their builds The EK-DuraClear structure is formulated to enable it to perform in a wide range of closed loop cooling systems making it the top choice for every liquid cooling enthusiast More than 2 years in development the goal was to create the most durable flexible and transparent tube on the market EK-DuraClear has very smooth inner walls and such surface inhibits particulate gathering or entrapment onto the tubing wall thus reducing the potential for bacterial growth and contamination Tested in the most extreme environments the EK-DuraClear is guaranteed to withstand far worse conditions that would ever appear in the everyday use One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks EK-DuraClear has one of the best bend ratios on the market resisting twisting and collapsing when doing a tight turn in your liquid cooling build Tighter bends without kinking will allow you to have no reduction in cooling performance whatsoever Unlike the matte black EK ZMT Tube EK-DuraClear is "glass-like" transparent tube designed to be used with EK-Ekoolant cooling liquids Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware To achieve the best longevity and maintaining the tubing shine we recommend you only use this tube with coolants and EK-ACF 1013mm fittings bought from our web shop Features- Highly durable- "Glass-like" transparency- Superior UV Transmission- Logo Free (no print on tube)- Inner Wall resilience- Environmentally responsible safe and non-toxic productTechnical Specifications- Material PVC- Color Clear not UV-reactive (resistant to UVA & UVB)- Length 3 meters- Operating temperature range -20°C to 80°COther Specifications- DEHP Free- Phthalate Free- California’s Prop 65 compliant- FDA Approved ingredients- ROHS Compliant PVCDimensions- Internal diameter (ID) 95 mm (38")- Outer diameter (OD) 159 mm (58")Recommended fittings - EK-ACF Fitting 1016mm"
Price: 22.49 |
| "Monsoon Hardline Acrylic Tube 1/2 X 5/8 (16mm) 4 Pack - Clear - 4x24" |
| "Available in 8 colors and two sizes and manufactured from premium virgin PMMA for the look you want and the reliability you demand Acrylic Hardline from Monsoon allows you to route your tube runs exactly where you want them and eliminates all those unsightly and expensive adapters tube coils etc for the cleanest most economical loop installations Compatible with all three styles of Monsoon Premium Hardline fittings featuring HardLock and with Monsoon economy push in style fittings Features- Plasticizer free - Premium Virgin PMMA"
Price: 19.49 |
| "ThermalTake Pacific 90 Degree Rotary Fitting - Black" |
| "Thermaltake Pacific G14 90 Degree Adapter – BlackThermaltake introduces the Pacific Series Adapter fittings for the ultimate in custom PC water cooling configurations Finished in black-plated copper the adapter fitting is in 360-degree revolvable design and consists of two sealed O-rings with side printed Tt logo allowing users to redirect the fittings at a 45 degree angle for easier tube routing Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by giving users ideal mounting fitting and flow High-flow and Leak-free DesignMade in Taiwan the fittings allow proper connection to G14” ports securing properly to any cooling components The fittings are available in chrome and black finishes with two O-rings prevent coolant from leaking Compared to D5 pump the maximum working pressure of O-rings is much higher delivering great pressure resistance and performance The 360-degree revolvable design delivers easier tube routing working around obstacles in the system Specification- PN CL-W052-CU00BL-A ( Black )- Dimension 42 x 283 x 22 (mm)- Applicable G 14- Weight 100 g- Material CU- Screw Thread G 14- Note 90 Degree Adapter"
Price: 13.99 |
| "XSPC XS-90ROT-CHR hardware cooling accessory Chrome" |
| "Rotary angle fittings to direct flowSpecification- 90° Angle- 360° Rotation- G14" Thread- Chrome Finish"
Price: 9.49 |
| "XSPC G1/4"" to 3/8"" ID 1/2"" OD Compression Fitting (Black Chrome) V2" |
| "Specification- Black Chrome Finish- For 38" ID 12" OD Tubing (10mm ID 13mm OD)- Low profile design- G14" Thread- Easy tool free coin installation"
Price: 7.99 |
| "XSPC G1/4"" to 3/8"" ID 1/2"" OD Compression Fitting (Chrome) V2" |
| "Specification- Chrome Finish- For 38" ID 12" OD Tubing (10mm ID 13mm OD)- Low profile design- G14" Thread- Easy tool free coin installation"
Price: 7.99 |
