 |
| White Egret Hyaluronic Acid Intensive Hydrating Formula-8 oz Bottle |
| $21.59 (Retail $28.75) |
| From the Manufacturer:MoisturizeTightenFirmProtectIntensive Hydrating Formula. [Read More] |
 |
| "PocketWizard BT3 Trigger Button to Miniphone Male - 3ft" |
| "The Pocket Wizard BT3 Trigger Button to Miniphone Male is a 3 foot long External Electronic Trigger Release for all PocketWizard products, with male miniphone connector."
Price: 27 |
| "PocketWizard PC5N Camera Sync Cable" |
| "The Pocket Wizard PC5N Camera Sync Cable is a 5 foot coiled lead with a PC Male attachment and a 1/8"" (3.5 mm) Mono Miniphone. It is compatible with most camera or flash PC terminals, including locking ring-equipped models."
Price: 17 |
| "PocketWizard MH3 Electronic Flash Cable" |
| "The Pocket Wizard MH3 Electronic Flash Cable is a 3 inch cable to connect PocketWizard to Comet, Norman, Speedo, Dynalite, Novatron, Lumidyne, Quantum Q-flash and Sunpak 120J, 555, 622."
Price: 12 |
| "PocketWizard MM1 Electronic Flash Cable" |
| "The Pocket Wizard MM1 Electronic Flash Cable is a 16 inch miniphone right angle to miniphone straight cable to connect PocketWizard to Elinchrom MicroCompact, Broncolor, Alein Bees, Visatec, etc. It can also be used for Bronica 6x6 & 645 motor drive connection and Hasselblad motor grip motor drives."
Price: 11 |
| "PocketWizard MP3 Electronic Flash Cable" |
| "The Pocket Wizard MP3 Electronic Flash Cable is a 3 foot cable to connect PocketWizard to Balcar, Bowens, Whitelighting, Hensel, Photogenic, Calumet, Norman and Profoto studio flash."
Price: 13 |
| "PocketWizard MH1 Electronic Flash Cable" |
| "The Pocket Wizard MH1 Electronic Flash Cable is for remotely triggering a flash equipped with a household sync terminal. The cable is 12 inches long and connects from Household Male Terminal to 1/8"" (3.5 mm) Mono Miniphone."
Price: 11 |
| "PocketWizard MP1 Electronic Flash Cable" |
| "The Pocket Wizard MP1 Electronic Flash Cable is a 16 inch straight cable designed to connect PocketWizard to studio flash heads with a 1/4 inch phono connection such as Bowens."
Price: 12 |
| "PocketWizard CM-N3-ACC Remote Cable for Canon N3 connection" |
| "The PocketWizard CM-N3-ACC Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC cable contains a pre-trigger connection. When a remote zone is enabled on a MultiMAX, the camera behaves as if the camera's shutter release button were held half-pressed continuously. The PocketWizard CM-N3-ACC makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. MSMM stereo to mono miniphone adapter included."
Price: 30 |
| "PocketWizard CM-E3-ACC Remote Cable" |
| "The PocketWizard CM-E3-ACC Remote Cable is for remotely triggering the electronic shutter release of cameras with a Canon E3 or sub-miniphone (2.5 mm or 3/32 inch, stereo or mono) remote terminal. MSMM stereo to mono miniphone adapter included."
Price: 25 |
| "PocketWizard ST4 Power Receiver" |
| "The Pocket Wizard PowerST4 Receiver is designed specifically for Elinchrom Style and Digital RX series lights* and provides remote power control capabilities when paired with an on-camera MiniTT Transmitter or FlexTT Transceiver. Power settings on your flash are adjusted simply by using the flash compensation dial on your camera or add the AC3 ZoneController to get three independent zones of power control capability. Once your flash settings are dialled in, ControlTL PowerTracking allows you to change shutter speed, f-stop and ISO and the system will automatically adjust power levels to maintain proper exposure. The receiver draws power from the flash and so doesn't need a battery. Using the PocketWizard Utility and USB connection, you can fine-tune the initial power settings, program your modeling light shut-off timing, change channels, or update your firmware.* (NOTE: Ranger RX, Speed and Speed AS require EL-Skyport Transceiver RX Adapter - not compatible with D-Lite)"
Price: 70 |
| "Interfit Single Channel Radio Receiver" |
| "This is an auxilliary receiver unit designed to work with the INT412 Single Channel Transmitter and INT492 4 Channel Transmitter, allowing more than one flash head to be fired simultaneously."
Price: 21.99 |
| "PocketWizard AC3 Zone Controller - Canon" |
| "The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera's position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your flashes wherever you want, without worrying about having to access them during a shoot. With the AC3 ZoneController, you are in total control of your flash.Three clearly labeled dials allow you to increase or decrease power to three zones of flash in 1/3-stop increments with a range of up to six stops. Three switches allow you to change zones between Manual, Auto (PowerTracking/E-TTL II) or OFF. Best of all, the design is simple with an intuitive interface. A firmware upgrade is now available for TT1 and TT5 via the Pocket Wizard website."
Price: 39 |
| "PocketWizard MiniTT1 - Nikon" |
| "Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Nikon locks onto the camera's hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to Nikon i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras"
Price: 165 |
| "PocketWizard FlexTT5 - Nikon" |
| "The Nikon dedicated Pocket Wizard FlexTT5 Transceiver, with its built in hot-shoe and ControlTL firmware, is the perfect addition to Nikon i-TTL II flash systems. The FlexTT5 takes the existing benefits of Nikon wireless systems beyond the boundaries of infrared technology. When paired with the Mini TT1 Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up. The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions."
Price: 180 |
| "PocketWizard AC7 RF Shield" |
| "The body of the Pocket Wizard AC7 shield is made with a material that effectively blocks RF interference (EMI) from clouding the FlexTT5 antenna. To block noise traveling through connections in the hot shoe, an electronic filter has been added to a hot shoe built into the AC7. With two ¼-20 mounting points, the AC7 can be mounted both vertically and horizontally on light stands, clamps, brackets or simply handheld. The back of the flash remains open for complete access to the LCD and flash controls and there is access to the remote power port. The flash head can be rotated when using the AC7 shield due to a small cut-away in the side of the shield. When used with an umbrella, the AC7's lay-flat design places the flash more in the center of the umbrella than usual and produces a symmetrical light shape for incredibly even light dispersion. Most of the popular diffusers, grids, snoots and reflectors can still be used with the AC7 shield in place. It will also offer additional protection for the TT5 unit."
Price: 40 |
| "PocketWizard AC5 RF Shield" |
| "The Pocket Wizard AC5 RF Soft Shield is a simple solution to reduce interference and improve performance of the FlexTT5 Transceiver. Special RF fabric and a shoe filter shields the FlexTT5 Transceiver from RF noise emitted by some Canon Speedlites (580EX II, 580EX and 430EX). The Canon 550EX, 270EX and newer 430EX II emit relatively low EMI and work well with the FlexTT5 without shielding. The AC5 allows easy access to all flash controls as well as a full range of flash positions. The AC5 can either be stored on the flash or it can be removed and rolled up making it easily storable in your camera bag. Its portability makes it an attractive RF noise solution. The AC5 RF Soft Shield can be used when using a high-power external battery. The AC5 is for use with receiving flashes only and is not for use with your on-camera flash. NOTE: The AC5 is not designed for horizontal use on a boom mount or light pole; for these situations please see the AC7 RF Hard Shield."
Price: 25 |
| "PocketWizard N10-ACC 10 Pin Motor Drive Cord for Nikon" |
| "The PocketWizard N10-ACC (previously N90M-ACC-ND) Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR's cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL functions. In addition, the PocketWizard N10-ACC cable contains a pre-trigger connection. When a remote zone is enabled on a MultiMAX, the camera behaves as if the camera's shutter release button were held half-pressed continuously. The PocketWizard N10-ACC makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. This cable will not work with the D100 and D200 fitted with the MB-D100 Grip but will with the D700. MSMM stereo to mono miniphone adapter included."
Price: 30 |
| "PocketWizard N-MCDC2-ACC Electronic Remote Cable" |
| "The Pocket Wizard N-MCDC2-ACC Electronic Remote Cable is designed to connect a PocketWizard MultiMax with ACC port or TT5 trigger to a Nikon DSLR supporting the MD-DC2 type remote release connection eg the D90 or D5000. It should be noted however that battery consumption will increase. MSMM stereo to mono miniphone adapter included."
Price: 30 |
| "PocketWizard NM4-P Nikon 4 Pin Motor Drive Cord Pre-Releasable" |
| "The Pocket Wizard CNM4-P Electronic Shutter Release Cable is designed to connect a PocketWizard device to a Nikon camera supporting the 4-Pin remote release connection (except D70). This cable incorporates the Pre-Release circuitry which prevents the camera from going into 'sleep' mode in the same way that holding the shutter button half-depressed does enabling quicker response to crucial shots. It should be noted however that battery consumption will increase."
Price: 27 |
| "PocketWizard MiniTT1 - Canon" |
| "Introducing the smallest Pocket Wizard radio trigger ever, the MiniTT1 Transmitter for Canon locks onto the camera's hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras. PLEASE NOTE: Not compatible with the Canon 1DX II."
Price: 159 |
| "Elinchrom Skyport SPEED USB Transceiver RX Speed" |
| "The Elinchrom Skyport SPEED USB Transceiver is designed to connect to the USB port on a Mac or PC. With the help of the free software available for download on the Elinchrom website, up to 64 individual heads or packs can be controlled from one computer with a variety of sychronisation and set-up options available. Full control is only available by using a full RX Transceiver system, flash heads connected to a Universal Receiver will only offer synchronisation and strobing options. NB Not compatible with ELC Pro HD or ELB400."
Price: 15 |
| "Elinchrom Skyport Transceiver RX Adapter" |
| "The EL-Skyport Transceiver RX Adapter is required when the Ranger RX / Speed / Speed AS are used with the EL-Skyport Transceiver RX for remote and trigger options."
Price: 31.5 |
| "PocketWizard AC3 Zone Controller - Nikon" |
| "The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera's position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your flashes wherever you want without worrying about having to access them during a shoot. With the AC3 ZoneController, you are in total control of your flash.Three clearly labeled dials allow you to increase or decrease power to three zones of flash in 1/3-stop increments with a range of up to six stops. Three switches allow you to change zones between Manual, Auto (PowerTracking/E-TTL II) or OFF. Best of all, the design is simple with an intuitive interface. A firmware upgrade is now available for TT1 and TT5 via the Pocket Wizard website."
Price: 62 |
| "Elinchrom 3.5mm to PC Adapter for Skyport" |
| "The Elinchrom 3.5mm to PC Adapter for Skyport converts a PC (female) sync cord to a 3.5mm sync plug."
Price: 9.5 |
| "Interfit 3m Sync Lead - Small Jack" |
| "This Interfit CIA332 Sync Lead has a PC camera connection at one end and a standard small mono jack at the other."
Price: 10 |
| "PocketWizard S-RMS1AM-ACC Electronic Shutter Release Cable" |
| "The PocketWizard S-RMS1AM-P Electronic Shutter Release Cable allows remote operation of Sony or Minolta cameras that utilise the RMS1AM electronic cable release connection from a PocketWizard Plus III, TT5 or MultiMAX transmitter. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required for remote camera triggering with a FlexTT5 if using E-TTL functions. NOTE: An older mono motor drive cable and/or pre-release cable can be used instead of an -ACC cable with a FlexTT5 but you will not have E-TTL capability. MSMM stereo to mono miniphone adapter included."
Price: 30 |
| "Bowens RC5 Creo Remote Control" |
| "The Bowens RC5 Creo Remote Control allows you to control the Creo 1200 and 1400 Generators without having to leave your camera position."
Price: 19 |
| "Phottix Strato II 5-in-1 Wireless Trigger - Canon" |
| "Enabling the operation of flashguns or studio heads at ranges of up to 150m, over 4 channels and groups, Phottix's Stratos II is an inexpensive and effective wireless flash trigger system which performs excellently."
Price: 99 |
| "Phottix Strato II 5-in-1 Wireless Trigger - Nikon" |
| "Enabling the operation of flashguns or studio heads at ranges of up to 150m, over 4 channels and groups, Phottix's Stratos II is an inexpensive and effective wireless flash trigger system which performs excellently."
Price: 99 |
| "Phottix Strato II Receiver Unit - Canon" |
| "This additional receiver unit is for use with the Canon dedicated Phottix Strato II Wireless Trigger Set, enabling you to trigger additional heads or flashguns and hence adding a further layer of control and creativity to your work."
Price: 49 |
