 |
| White Egret Hyaluronic Acid Intensive Hydrating Formula-8 oz Bottle |
| $21.59 (Retail $28.75) |
| From the Manufacturer:MoisturizeTightenFirmProtectIntensive Hydrating Formula. [Read More] |
 |
| "Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead" |
| "Ideal for lightweight cameras up to 1kg, the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead offers full 360° movement, and is adjustable from 1.1 to 1.4 metres high. It allows users to control the underslung powerhead via the wired remote control box, which pans and tilts the camera. Two variable speed control knobs gives the head precise movement at any required speed."
Price: 948 |
| "Sevenoak Jib Arm (Carbon Fibre)" |
| "Ideal for wedding videographers and documentary producers, the Carbon Fibre Jib Arm by Sevenoak is a tripod-mounted camera crane system that is designed to allow the operator to smoothly boom a camera up and down and move in an infinite number of 360° arcs. Its carbon fibre construction means it is lightweight at just 2.3kg, yet incredibly sturdy. It can carry a maximum load of 5kg."
Price: 309.99 |
| "Libec SWIFT JIB50 Extendable Jib" |
| "The Libec SWIFT JIB50 Extendable Jib comes with a padded carrying case and adjusting weight. Extendable from 100 cm to 190 cm in reach."
Price: 2580 |
| "Libec SWIFT JIB50 Extendable Jib Kit" |
| "The standard SWIFT JIB50 kit comes with carrying cases for each included item: jib arm, tripod and dolly. All black colour, including tripod and dolly. Please note that the illustrated balance weight is not included."
Price: 4200 |
| "Libec Jib Weight Kit" |
| "The Libec Jib Weight kit consists of 2 sets of weights (2.5 kg and 5 kg) for use when balancing jibs, each with their own carry case."
Price: 504 |
| "Libec Clamp Handle for SWIFT Jib" |
| "The Libec Handle50 clamp handle can be clamped on the weight bar of the SWIFT JIB50. A remote control is attachable to the handle to assure smooth jib operation from the rear."
Price: 72 |
| "Libec REMO30 Remote Head" |
| "The Libec REM030 Remote Head enables remote pan and tilt control of a mounted video recording unit. Comes supplied with a selection of data cables, including HDMI and LANC."
Price: 3540 |
| "Libec 5m Control Cable" |
| "A LANC-compatible control cable for remote operation of mounted video heads. 5 m length."
Price: 84 |
| "Libec 50m Control Cable" |
| "A LANC-compatible control cable for remote operation of mounted video heads. 50 m length."
Price: 324 |
| "Syrp Magic Carpet Track 1600mm" |
| "The Syrp Magic Carpet Track 1600mm (long version) provides a sliding surface for the Magic Carpet slider system. Supports up to 7kg."
Price: 179 |
| "Syrp Magic Carpet Carriage and End Caps" |
| "The Syrp Magic Carpet Carriage (camera plate attachment) and End Caps (feet) make up the Magic Carpet track slider system (not included, available separately). The carriage with reversible ¼ and 3/8 thread attachment screw slides onto the track which features a break and a spirit level. The two feet slot either side of the track and have adjustable quick release legs to ensure a quick and easy setup."
Price: 159 |
| "Syrp Magic Carpet Slider Kit - Long" |
| "Beautifully crafted, the Syrp Magic Carpet Slider Kit long version (1600mm) is for use with the Syrp Genie Motion device (not included, available separately) and allows you to create smooth, professional-looking footage for videos and time-lapse photography. With quick release adjustable legs, a counter weight roller for vertical shots, and high precision ball bearing rollers, the Magic Carpet is ready for quick setup and professional film making. The carriage and end caps (included) are designed to be interchangeable between tracks so you can swap them out."
Price: 319 |
| "Hague D9 Table Dolly" |
| "The Hague D9 Table Dolly with 75mm bowl allows you to get smooth tracking shots on a table, board or any flat surface. It features a 20kg support weight and high-quality 80mm diameter wheels with twin sealed radial ball bearings to ensure movements are quiet and smooth. The dolly will track in a straight line or it can be set to track in an arc to go round an item, it will also accept a 75mm bowl video head to allow both pan and tilt movements. Note: tripod head and camera not included."
Price: 198 |
| "Konova K5 Slider Kit 80cm" |
| "The K5 range of sliders from Konova are suitable for mid-sized camcorders such as the Canon C100, Blackmagic Cinema Camera and Sony FS5. Smooth, stable and able to carry a payload of 23kg, they are supplied compete with adjustable legs, tools and a soft carry case. This model is 80cm in length."
Price: 300 |
| "Konova K5 Slider Kit 100cm" |
| "The K5 range of sliders from Konova are suitable for mid-sized camcorders such as the Canon C100, Blackmagic Cinema Camera and Sony FS5. Smooth, stable and able to carry a payload of 23kg, they are supplied compete with adjustable legs, tools and a soft carry case. This model is 100cm in length."
Price: 330 |
| "Konova K5 Slider Kit 150cm" |
| "The K5 range of sliders from Konova are suitable for mid-sized camcorders such as the Canon C100, Blackmagic Cinema Camera and Sony FS5. Smooth, stable and able to carry a payload of 23kg, they are supplied compete with adjustable legs, tools and a soft carry case. This model is 150cm in length."
Price: 399 |
| "Konova K-ARM Length-Extendable Tripod Support Arm for K-Series Slider" |
| "This lightweight and inexpensive support arm adds solid support to your Konova slider without the need to add another tripod or lighting stand. Simply attach it to the underside of your Konova Slider and extend it to clamp onto your tripod legs."
Price: 90 |
| "Matthews Bazooka" |
| "Utilising the industry standard Elemac mount system, the Bazooka is used to mount a camera to dollies or other platforms."
Price: 1499 |
| "Matthews Hot Buttons - Set of 4" |
| "For use with Matthew dollies - including the Round-d-Round Doorway Dolly - when running the dolly on track or pipe. The Hot Button replace the dollly's wheels. Whereas the standard wheels will only run on straight track, these buttons will also run on 20 diameter curved tracks. Ingenious operators can also use the Hot Buttons to construct their own scooter dolly."
Price: 999 |
| "Rhino Flywheel" |
| "The Rhino Flywheel uses the integrated belt drive of the EVO sliders to smooth out inconsistencies in your slides by acting as an inertia dampener. Featuring built-in rubber bumpers, this weighted accessory allows you to capture smoother, more consistent motion. It attaches very easily to the drive shaft and can be locked down with the tool-less fastener."
Price: 67 |
| "Rhino Shutter Release Cable - Canon" |
| "With this Rhino Shutter Release Cable for Canon cameras, users of the Rhino Motion (not included, available separately) can trigger their camera's shutter speed when using its built-in intervalometer. Simply connect this coiled-spring cable to your camera and the Rhino Motion, and then use the Advanced Time-Lapse menu to set the desired shutter duration. Rhino Motion will then start triggering and controlling your camera."
Price: 5 |
| "Rhino Shutter Release Cable - Canon Pro" |
| "Designed for use with select Canon cameras, the Rhino Canon Pro Cable allows Rhino Motion to control your cameras shutter speed using its in-built intervalometer. Simply connect this coiled-spring cable to your camera and the Rhino Motion, and then use the Advanced Time-Lapse menu to set the desired shutter duration. Rhino Motion will then start triggering and controlling your camera."
Price: 5 |
| "Rhino Shutter Release Cable - Nikon" |
| "With this Rhino Shutter Release Cable for Nikon cameras, users of the Rhino Motion (not included, available separately) can trigger their camera's shutter speed when using its built-in intervalometer. Simply connect this coiled-spring cable to your camera and the Rhino Motion, and then use the Advanced Time-Lapse menu to set the desired shutter duration. Rhino Motion will then start triggering and controlling your camera."
Price: 5 |
| "Syrp Slingshot" |
| "Designed to allow you to achieve motion control capture for distances up to 328ft, the Syrp Slingshot is simple to set up thanks to its quick-release design and the tools that are supplied with it. Shoot 1, 2, or 3-axis time-lapse images in any location, without restriction, by simply securing the mounting bars to trees, lampposts, and similar objects. It can also be used with the Syrp Genie."
Price: 899 |
| "Sevenoak SKDS60 Dolly Slider" |
| "Featuring a heavy-duty anodized aluminium construction, the Sevenoak SKDS60 Dolly Slider can be used either as a dolly or a slider, in straight lines or with a curved movement, allowing the user to create smooth, professional-looking production shots on a limited budget. It measures 60cm in length and features standalone feet, adjustable axles, smooth glide rail, spirit level and tension adjustment."
Price: 119.99 |
| "Sevenoak Standard Camera Slider (85cm)" |
| "Featuring a heavy-duty anodised aluminium guide rail for smooth and quiet panning, the 85cm Sevenoak Standard Camera Slider is designed to deliver high-quality production shots with effortless motion. It is suitable with rigs up to 7kg in weight, and can either be attached to a tripod or used as a standalone slider. This slider is 85cm in length, and is ideal for use with DSLRs and camcorders."
Price: 124.99 |
| "Sevenoak Standard Camera Slider (120cm)" |
| "The 120cm Sevenoak Standard Camera Slider, designed to deliver high-quality production shots with effortless motion, features a heavy-duty anodised aluminium guide rail for smooth and quiet panning. It is suitable with rigs up to 5kg in weight, and can either be attached to a tripod or used as a standalone slider. This slider is 120cm in length, and is ideal for use with DSLRs and camcorders."
Price: 139.99 |
| "Sevenoak Heavy Duty Camera Slider (75cm)" |
| "Featuring a heavy-duty aluminium construction with adjustable feet and precision bearings, the 75cm Sevenoak Heavy Duty Camera Slider is designed to deliver high-quality production shots with effortless motion. It is suitable with rigs up to 15kg in weight, and can either be attached to a tripod or used as a standalone slider. This slider is 75cm long, and is ideal for DSLRs and camcorders."
Price: 159.99 |
| "Sevenoak Heavy Duty Camera Slider (120cm)" |
| "Designed to deliver high-quality production shots with effortless motion, the 120cm Sevenoak Heavy Duty Camera Slider features a heavy-duty aluminium construction with adjustable feet and precision bearings. It is suitable with rigs up to 10kg in weight, and can either be attached to a tripod or used as a standalone slider. This slider is 120cm long, and is ideal for DSLRs and camcorders."
Price: 274.99 |
| "Sevenoak Carbon Fibre Slider 80cm" |
| "The 80cm Carbon Fibre Slider by Sevenoak is a portable, lightweight, extendable, and durable slider with an impressive load capacity of 10kg. Its belt system is driven by a flywheel, with a handle for smooth, silent, precision tracking. Also included is a built-in tension knob to adjust the tension and control the movement. The sliders four legs can be adjusted, as can the rubber ball feet."
Price: 379.99 |
