| "Trend Trend RBT/4 Routabout Kit 22mm x 1/2"" Shank" |
| "Access to pipes & cables beneath chipboard floors in seconds.Shank Diameter 1/2 inchFloor thickness 22 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes:1 x Routabout template3 x Spacer rings1 x Special TCT router cutter1 x 30mm Plastic guide busPlease refer to UK Building Regulations Approved Document B and any amendments before using this accessory."
Price: 67.99 |
| "Trend Trend RBTRNG22/10 10 x 22mm Routabout Rings" |
| "Replacement 22mm thick floor rings."
Price: 59.99 |
| "Trend Trend RBT/1 Routabout Kit 18mm x 1/4"" Shank" |
| "Access to pipes & cables beneath chipboard floors in seconds.Shank Diameter 1/4 inchFloor thickness 18 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes: 1 x Routabout template3 x Spacer rings1 x Special TCT router cutter1 x 30mm Plastic guide bushPlease refer to UK Building Regulations Approved Document B and any amendments before using this accessory."
Price: 64.99 |
| "Trend Trend CRB Combination Router Base" |
| "The Combination Router Base is a retro fit, quick change, multi-functional router base designed to:Increase the overall versatility of the router.Improve the quality of finish of every routing pass.Reduce the possibility of error.Increase stability during routing.Increase the level of precision achieved.Save set up time between tasks.Save space on storing hand made jigs.The CRB has seven functions - an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier and also enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush ref GB40/B is required).The CRB will fit most routers with two 8mm, 10mm and 12mm fence rod holes at centres of 78mm to 130mm.This product includes:1 x Plastic baseplate with handle1 x Bridge2 x Rods 8mm dia x 270mm1 x Bridge shim pack (2x2mm, 1x2mm, 1x1mm, 1x0.5mm)1 x Scale1 x Pivot pin1 x Pair of mortise pillars"
Price: 85.70 |
| "Trend Trend RT/13X1/2TC Rota-Tip Cutter, 12.7mm" |
| "Solid Carbide replaceable blades.D 1/2 inchD 12.7 mmC 49.5 mmOL 100 mmShank Diameter 1/2 inch"
Price: 88.99 |
| "Trend Trend CSB/AP18458 Craft Saw Blade Aluminium And Plastic 184mm X 58 X 16mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy.D 7 1/4 inchesD 184 mmBore 16 mmKerf 2.8 mmPlate thick 1.9 mmNo. of Teeth 58Tooth form TCPHook Neg 6 degreesQuick Selector No. 12Colour Code Grey"
Price: 16.99 |
| "Trend Trend GB24 Guide Bush, 24mm Diameter" |
| "Guide bush guides the router when using a template.Outside diameter 24 mmInner diameter 21 mmProjects from plate 6 mmPlate diameter 60 mmCsk screw hole centres 50 mm"
Price: 9.98 |
| "Trend Trend SL/B 2.0mm Slotter Blade" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 36 mmKerf 2.0 mmNo. of Teeth 2"
Price: 29.98 |
| "Trend Trend C058X1/4TC Radius 12.7mm Radius X 25.4mm Diameter" |
| "These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.D 1 inchD 25.4 mmC 5/8 inchC 15.9 mmR 12.7 mmOverall length 56.5 mmShank Diameter 1/4 inch"
Price: 31.99 |
| "Trend Trend ACRS2/6X1/4STC 6.3mm Single Flute Acrylic Cutter" |
| "Single flute for fast cutting.D 1/4 inchD 6.3 mmC 10 mmShank Diameter 1/4 inchOverall length 51 mm"
Price: 39.98 |
| "Trend Trend GB/5/R Sub-Base" |
| "Solid laminate. Accepts Trend Guide Bushes. Supplied with line-up pin and bush. Ensures concentricity of cutter and guide bush.Suitable for :Festool OF1400Bosch POF1400This product includes:1 x Sub base1 x Template Guide Bush1 x 1/2"" Line-up pin1 x 1/4"" Line-up pin"
Price: 34.99 |
| "Trend Trend C049X1/2TC 45° Self Guided Chamfer" |
| "Self-guiding chamfer/bevel cutter.D 32 mmC 1/2 inchC 12.7 mmB 9.5 mmA 45 degreesOverall length 60 mmShank Diameter 1/2 inch"
Price: 34.36 |
| "Trend Trend GB/5/P Sub-Base" |
| "Solid laminate."
Price: 34.99 |
| "Trend Trend GB/5/S Special Sub-Base, drilled to order" |
| "This sub-bale will be drilled to order, please call 0115 956 5555 to arrange for it to fit your router.This product includes:1 x Sub base1 x Template Guide Bush1 x 1/2"" Line-up pin1 x 1/4"" Line-up pin"
Price: 39.98 |
| "Trend Trend MT/DUSTKIT Mortice and Tenon Jig Dust Extraction Kit" |
| "The optional dust kit set for use with the mortise & tenon jig.Dust spout aperture 58 mm (2-1/4 inch)Adaptor OD 58 mm (2-1/4 inch)Adaptor ID 35 mm (for 39 mm OD hose)This product includes:1 x Deflector plate1 x Spout1 x Hose adaptor2 x Magnets"
Price: 40.99 |
| "Trend Trend OFS/BASE Offset Base" |
| "This teardrop shaped base is fitted to the router and allows better control when edge moulding, by preventing router tilt.Size 280 x 180 x8 mmAperture dia. 40 mmMax. cutter dia. 36 mmThis product includes:1 x Teardrop shaped base1 x Knob assembley2 x Fixing screws"
Price: 35.99 |
| "Trend Trend C195X1/2TC 12.7mm Bearing Guided Trimmer" |
| "Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 50 mmB 12.7 mmA 90 degreesOverall length 104.5Shank Diameter 1/2 inch"
Price: 25.99 |
| "Trend Trend 13/1X1/2TC Radius Cutter" |
| "For coves and part of a rule joint. 1/2"" shank diameter.D 16 mmC 19.5 mmR 5/16 inchR 8 mmOL 57.5 mm"
Price: 52.99 |
| "Trend Trend TSQ 645mm T-Square" |
| "Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc.Overall length 703 mmBlade length 645 mmBlade thickness 3 mmBlade width at butt 70 mmBlade width at end 42 mmButt length 280 mmButt thickness 8 mmButt width 58 mmButt length from guiding edge 140 mmSquare tolerance 1mm per metre"
Price: 34.99 |
| "Trend Trend FHA/003 Fine Height Adjuster" |
| "This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.It is especially useful for accurate work such as when the router is held inverted in a router table.Suitable for the following:-TREND T10ELU MOF 177(E), 131DEWALT DW624, 625EK, 629CMT CMT1E 2E"
Price: 31.99 |
| "Trend Trend C011x1/4TC Two Flute Straight Cutter" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D1/4 inchD6.3 mmC3/4 inchC19.1 mmOverall length: 62.5 mmShank Diameter: 1/4 inch"
Price: 11.99 |
| "Trend Trend C041Ax1/4TC 104° Dovetail Cutter" |
| "This dovetail cutter produces a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOverall length 60.5 mmA 104 degreesShank Diameter 1/4 inch"
Price: 19.99 |
| "Trend Trend HOSE/BAY/56 Hose Bayonet" |
| "Designed to fit hoses to extraction fittings."
Price: 17.99 |
| "Trend Trend PH/PC/95 Pocket Hole Plug Cutter" |
| "Tool steel plug/pellet cutter which allows you to cut plugs to fill the holes left by pocket screws.Use in a pillar drill to allow plugs to be made up to 52mm long to be created in end grain.Using the same timber as the project ensures the plug matches."
Price: 28.99 |
| "Trend Trend CSB/BW14 Bushing Washer" |
| "Bushing washers supplied to reduce bore diameter for certain makes and models of saw."
Price: 1.28 |
| "Trend Trend BW34 Bushing Washer" |
| "Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only."
Price: 2.48 |
| "Trend Trend BW25 Bushing Washer" |
| "Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only."
Price: 2.48 |
| "Trend Trend FHA/009 Fine Height Adjuster" |
| "This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height."
Price: 16.99 |
| "Trend Trend FHA/001 Fine Height Adjuster" |
| "This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height."
Price: 19.99 |
| "Trend Trend HJ/1 Hinge Jig 3mm Stop Kit" |
| "A 3mm spacer pack for use with the Hinge jig to allow it to be used on architrave that is set back by 4mm. Easy to retro fit to existing hinge jigs and allows for new style architectural designs. Supplied with fixing screws."
Price: 13.99 |
