 |
| ARO L36341-110 Air Line Lubricator,1/2In,156cfm,250 psi |
| $74.99 |
| Choose from in-line and mist pneumatic lubricators. Take a look at the features for Aro Modular Air Line Lubricator....[Read More] |
 |
| "Laser Tools 5234 Oil Filter Drain Tool Toyota/Lexus" |
| "For use on filter housings with screw thread attachments on Toyota | Lexus models.Oil filter drain tool.For use on filter housings with screw thread attachments.Time saver.Prevents oil spillage while changing the filter.Good for the environment."
Price: 20.61 |
| "Laser Tools 5229 Oil Sump Repair Kit M20 X 1.5 Selected Steel" |
| "For use on M19 sumps where the thread has been stripped.For use on sumps where the thread has been stripped.Contains 1 x tap M20 x 1.5, 6 sump plugs, 12 copper washers.Part of a range of 6 sets M13-M22.time and money saver.Selected steel."
Price: 30.03 |
| "Laser Tools 3882 Oil Filter Wrench - 76mm x 12 Flutes" |
| "Removes the outer casing of eco-oil filters without damage. The paper filter can then be replaced successfully. Essential for routine service on modern vehicles. For Citroën and Peugeot vehicles including Citroën Visa DTi, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models.76mm x 12 flutes.3/8"" drive.Essential for routine service on modern vehicles.For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models.Plus Renault Megane, Laguna 1.5 | 1.9 | 2.2 | 2.5 DCi engines and Mercedes-Benz."
Price: 6.83 |
| "Laser Tools 6785 Camshaft Turning Tool - VAG TFSi Gen III" |
| "Camshaft adjuster holding and turning socket used to set and hold the camshaft adjusters on the latest Generation III TFSi 1.8 and 2.0 petrol engines across the VAG ranges.For rotating and holding the intake camshaft during the timing chain service. Use with Laser 5981 Engine Timing Tool Kit and Laser 5920 Crankshaft Pulley Holding ToolEngines: 1.8 and 2.0 litre 4-cylinder TFSi direct injection engines Gen IIIModels: Audi A4 2008, A5 Cabriolet 2009, A5 Coupe 2008, Q5 2008, A3 2011"
Price: 9.37 |
| "Laser Tools 3630 Camshaft Locking Tool - Fiat Barchetta" |
| "Camshaft locking tools for Fiat Barchetta | Coupe 1.8 16v.OEM Ref. 1 860 847 000For use on 1.8 petrol enginesUse tool marked D1 on inlet camshaft on No. 2 cylinderUse tool marked D2 on exhaust camshaft on No. 3 cylinderMade in Sheffield"
Price: 41.6 |
| "Laser Tools 3560 Tensioning Pry" |
| "For Fiat Bravo/Brava 1.4 12v (1995 onwards).For Fiat Bravo/Brava 1.4 12v (1995 onwards)OEM code 1 860 443 000Engine timing toolTo relieve tensioner loadBall end handle"
Price: 15.29 |
| "Laser Tools 6739 Flywheel Locking Tool - Mercedes Benz M651" |
| "Flywheel locking and holding tool Mercedes Benz M651. Fits popular 1.8 & 2.0 diesel enginesApplication: A Class, B Class, C Class, CLA Class, E Class, GLA Class, GLK Class, V Class 2008 < Also includes light commercials such as Sprinter, Viano and VitoEquivalent to the Mercedes tool OEM 65189024000Bolts in place of the starter motor to lock the flywheelThis tool effectively locks the flywheel/drive plate and prevents it turning when undoing or tightening the crankshaft front pulley fixings"
Price: 30.2 |
| "Laser Tools 3633 Camshaft Locking Tool - Fiat" |
| "Camshaft locking tools for Fiat 1.4 12v.For Brava | Marea | Marea Weekend | Marengo.Block is used on No. 2 cylinder (inlet).Also used on Lancia.OEM Ref. 1 860 899 000.Made in Sheffield."
Price: 40.92 |
| "Laser Tools 3632 Camshaft Locking Tool - Fiat" |
| "Camshaft locking tools for Fiat Brava | Bravo | Marea | Marea Weekend | Coupe 2.0 20v non-turbo.Non-turbo engines onlyOEM Ref. 1 860 892 000Use tool marked F1 on inlet camshaft on No. 3 cylinderUse tool marked F2 on exhaust camshaft on No. 2 cylinderMade in Sheffield"
Price: 43.35 |
| "Laser Tools 5655 Adjustable Spark Tester" |
| "Adjustable spark testerTests the quality of the coil according to spark colour and distance.Clear viewing panelDetachable lead and crocodile clipsFully adjustable to test the strength of sparkTime saver"
Price: 17.62 |
| "Laser Tools 3564 Belt Tensioner - Peugeot" |
| "This timing belt tensioner is designed specifically for later models of Citroën/Peugeot models. 6mm square. OEM: 0188Q2OEM Ref 0188Q26mm squarePSA enginesTime saving0"
Price: 11.45 |
| "Laser Tools 4807 Oil Gauge/Dipstick - Audi" |
| "This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems. The tool checks the oil levels on Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI and 2.0 TDI CR. Oil gauge and dipstick.Specifically for Audi engines fitted with electronic oil level systems.The tool checks the oil levels on Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI and 2.0 TDI CR. OEM T40178.Can also be used to assist the calibration of the drivers instrument panel."
Price: 20.45 |
| "Laser Tools 3493 Top Dead Centre Indicator - Italian" |
| "An adaptor that allows a Dti gauge to be fitted to one end (not included) and the unit then screwed into the spark plug hole for identification of the exact TDC positionFor Italian carsFor deep seated spark plug holes (14mm)Alfa Romeo, Fiat and LanciaOEM Code 1 860 895 000/1 895 879 000Also used on Ferrari engines"
Price: 46.1 |
| "Laser Tools 4449 Oil Dip Stick For Audi 659mm" |
| "For checking the Auto Transmission Fluid levels on Audi 100 vehicles. The tip of the dipstick (first 11mm) is the 20°C cold fluid reading, the second reading is the Min at 80°C and third reading is at Max 80°C. Maintain vehicle level when checking ATFFor checking the oil transmission fluid on Audi 100 engines.The tip (first 11mm) is the 20°C cold fluid reading.The second reading is the minimum at 80°C .Third reading is at max 80°C.Maintain vehicle level when checking ATF."
Price: 26.21 |
| "Laser Tools 2833 Top Dead Centre Indicator" |
| "For use on most petrol engines with a 14mm spark plug thread. Provides clear and simple indication as to when the cylinder has risen to its highest point. 16mm shank for use with standard socket.Clear and simple indicator.For use with most petrol engines with a 14mm spark.Used in conjunction with dial test indicator.Easy to use.16mm shank for use with standard socket. Overall length 152mm."
Price: 23.57 |
| "Laser Tools 5903 Engine Timing Tool Kit - Ford/Volvo" |
| "Engine timing tool kit - Ford /Volvo 1.6 EcoBoost enginesVolvo engines: 1.6gtdiFord engines: 1.6 SCTi/Ti-VCT Ecoboost petrol Includes: Ford B-Max/C-Max/Focus/Galaxy/Grand C-Max/Mondeo/S-MaxVolvo: S60/S80/V60/V70Made in Sheffield"
Price: 44.02 |
| "Laser Tools 5251 Piston Ring Groove Cleaner" |
| "For the removal of carbon deposits from piston ring grooves. Use with Part No 5250.For the removal of carbon deposits from piston ring grooves.Suitable for piston sizes from 51mm to 127mm.Complete with three six-blade cutters.Cutter 1 1/16""-5/64""-3/32""-1/8""-5/32""-3/16"", Cutter 2 -2.0/2.5/3.0/4.0/4.5mm & 1/4"", Cutter 3-1.2/1.5/1.8/2.8/5.0/5.5mm.Time saver."
Price: 22.55 |
| "Laser Tools 1867 Diesel Timing Kit - Citroën | Peugeot" |
| "This small timing pin kit includes the bolts for locking the diesel pump and camshaft when changing the belt on earlier non-common rail diesel fuel systems on PSA engines used in many Citroën | Peugeot.The Laser diesel timing Kit 1867 is a set of essential tools for setting and locking the camshaft and diesel pumpSuitable for non-common rail diesel engines (1982-2002)OEM reference included with the kitUse on Citroën C15, Dispatch, Relay, Visa, Xantia, XM Xsara and ZX models also Fiat Ducato, Scudo, UlysseeMade in Sheffield"
Price: 9.81 |
| "Laser Tools 5250 Piston Ring Installer/Remover Steel" |
| "For piston rings size range 1.2-6.3mm(3/64""-1/4"").Vinyl grip spring loaded handles.For piston rings size range 1.2-6.3mm(3/64""-1/4"").Helps prevent ring breakage.Time saver.Manufactured from Selected steel."
Price: 5.92 |
| "Laser Tools 4703 Tensioner Tool Set 2pc - Volkswagen" |
| "A pair of cam belt tensioner tools specifically designed for the VAG 1.4 | 1.9 | 2.0 Tdi PD engines.A set of two Cam Belt tensioner locking tools required for use on Volkswagen 4 cylinder TDI PD SOHC diesel enginesIncluding Golf, Golf Plus, Jetta, Passat, Eos, Touran, Caddy and Caddy Maxi manufactured from June 2005 - 2008.OEM Tool Codes T10265 and T10264Also used on Audi 1.9/2.0 Tdi PD & CR found in A3/A4/A5 (2003-08) and Seat Altea/ Leon/ToledoTime saver"
Price: 9.12 |
| "Laser Tools 6585 Injector Nozzle Restorer - Mercedes Benz" |
| "Part of the Laser range of tools for Petrol InjectorsFor restoring fuel injectors immediately after calibration of the sealing ringsApplications: Mercedes Benz with M133, M152, M157,M270,M 274,M276, M278 engines For most 4.6 to 5.5litre petrol enginesEqual to OEM 2725890043000"
Price: 17.7 |
| "Laser Tools 2071 Engine Cylinder Hone - Stone Set 3pc" |
| "A set of stones for the Laser engine cylinder hone set - Part No 2070. Medium grade x 100mm.3 piece stone set.Medium grade (180 grit) 100mm long x 15mm wide x 20mm deep.For use with the engine cylinder hone - Part No 2070.Suitable for cylinders with a bore diameter of 50mm - 180mm.Enables the inside surface of engine cylinders to be cleaned of carbon deposits and re-surfaced quickly and effectively."
Price: 17.35 |
| "Laser Tools 4199 Crankshaft Locking Tool - Volkswagen" |
| "This tool is for the later type pulley, but it is not exclusive to the 2.0 litre (06 on). T10100 will be applicable to many earlier 1.9 TDI engines as well (Polo, 2003, ASZ is an earlier example).Arrow at 1 o'clock position between two bolt holes and an oval sprocketOEM ref. T10100For 1.9/2.0 TDI PD enginesFits Caddy, Eos, Golf, Jetta, Passat, Polo, Sharan, Tiguan, Touran, TransporterTool available for arrow at 12 o'clock position with round sprocket - Part No. 3241"
Price: 13.52 |
| "Laser Tools 6584 Petrol Injector Extractor Tool – Mercedes 4.6/5.5lt" |
| "Part of the Laser range of tools for Petrol InjectorsDesigned for removing the petrol injector using a slide hammer or T bar on 4.6 to 5.5 litre petrol enginesApplications M133, M152, M157, M270, M274, M276, M278 engines0Equal to OEM 278589003300For 1.8/1.9 litre engines use Laser Part No 6738"
Price: 41.65 |
| "Laser Tools 4347 Timing Tool Set - Ford" |
| "Primarily offering late Ford petrol engine coverage but also includes some Volvo 1.8 and 2.0 enginesThis new camshaft setting bar updates the existing 3096 and is suitable for all the applications Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6Also used on Volvo models with 1.8/2.0 CHAIN enginesMade in SheffieldCamshaft Locking Strap now includes OEM 303-376B"
Price: 21.89 |
| "Laser Tools 5709 Extra Deep Socket 10mm/12mm x 120mm" |
| "Two extra deep sockets in 10mm and 12mm x 120mm long.Two extra deep sockets in 3/8""D x 120mm long - Single Hex (6pt)Ideal for heavily recessed fixings that have extra long bolts for example some bumper, rear lamp and door hinge fitting Manufactured from Chrome Plated Chrome Vanadium.Designed specifically for undoing deeply recessed fixing where long threaded bolts are used. Particularly useful for the parking brake cable adjusters on VAG, Vauxhall/Opel, BMW and Ford.Can also be used for Diesel glow plugs with 10mm and 12mm hex fittings plus suitable for C-Class (W240) rear bumper cover. 10mm deep socket suitable for adjusting the handbrake on VAG /Opel/ford/BMW"
Price: 12.87 |
| "Laser Tools 6440 Air Conditioning Service Tool - Mercedes Benz" |
| "Mercedes Air Conditioning Service Tool - used to remove and refit the receiver/dryer cartridge in the air conditioning condenser. This is an essential tool when servicing or opening up the A/C system on the vehicles listed. 1/2 x 27mm external HexEquipped with a detente hole for a more secure fit on the wrenchApplications include: Mercedes W203 (2001-2007 C-class), W209 (2003-2009 CLK-class) and R171 (2005-2011 SLK-class).OEM 203 589 001 000The receiver dryer cartridge should be replaced every couple of years on all cars but particularly when the a/c system has been opened up or is about to be refilled."
Price: 8.75 |
| "Laser Tools 4306 Flywheel Locking Tool - Ford Dura-torq" |
| "This tool is specific to those Ford DuraTorq engines fitted with common rail fuel injection. OEM No 303-698 (21-251)Specific to those Ford DuraTorq engines fitted with common rail fuel injection.OEM No 303-698 (21-251)For locking the flywheel which changing the cam beltSpecialist engine timing toolPackaged in a poly bag with label"
Price: 13.16 |
| "Laser Tools 3792 Tensioning Tool - Fiat | Peugeot" |
| "A cambelt tensioner locking block which slides onto the tensioner and holds it back so that the belt can be replaced with ease.Tensioning tool for clockwise/anticlockwise tensionersOEM 1 860 638 000For use on Ducato 2.8D (1997-2002) and 2.8 JTD (2000-2004)For use on Argenta | Croma | Ducato | Talento 2.5/2.8D (1997-2002) and 2.8 JTD (2000-2004)Time saver"
Price: 13.66 |
