| "Clarke Clarke CTJ3GLS 3 Tonne Heavy Duty Commercial Trolley Jack" |
| "This Clarke heavy duty trolley jack features an extra-long reach 1.3 metre chassis and large 124mm saddle. This trolley jack also benefits from a control rod on the handle which allows it to be locked in 3 positions."
Price: 298.80 |
| "Clarke Clarke WBC240 240A Battery Starter/Charger" |
| "The Clarke WBC240 is a heavy duty starter/charger, perfect for use in garages and bodyshops etc. Large wheels allow easy movement around the work area and the large ammeter at the top of the device provides a clear display of output current while in use. Multi-function charge and start modes make the WBC240 a versatile piece of kit for any workshop or garage. Device is compatible with 12V and 24V lead acid batteries, with a capacity of up to 700Ah. IMPORTANT NOTICE : THIS PRODUCT IS NOT TO BE CONNECTED VIA A 13AMP PLUG. IT MUST BE CONNECTED TO A SUITABLE INDUSTRIAL SUPPLY ISOLATOR OR HEAVY DUTY PLUG."
Price: 191.98 |
| "Clarke Clarke Digicar 600 Electronic Battery Charger/Starter" |
| "The Digicar 600 is a new generation fully automatic, microprocessor controlled professional battery charger. It also provides a boost function that is designed to safely jump start modern vehicles without damaging sensitive electronics such as found in ABS, airbag sensors, ignition and audio systems. "
Price: 298.80 |
| "Clarke Clarke Digicar 900 Electronic Battery Charger/Starter" |
| "The Digicar 900 is a new generation fully automatic, microprocessor controlled professional battery charger. It also provides a boost function that is designed to safely jump start modern vehicles without damaging sensitive electronics such as found in ABS, airbag sensors, ignition and audio systems."
Price: 478.80 |
| "Clarke Clarke CTJ1800A 1.8 Tonne Aluminium Racing Trolley Jack" |
| "This Clarke trolley jack benefits from an extra low saddle and frame. Its rubber contact pad prevents damage to vehicles, while the rear swivel casters make manoeuvring the trolley jack easy without sacrificing stability. The nylon wheels and casters prevent marking on smooth garage floors. "
Price: 191.98 |
| "Draper Draper C2CB 12V DC Vehicle to Vehicle Booster" |
| "Easy to use car-to-car battery booster. Gives low vehicle batteries the boost required to get started within minutes. No need for jump leads, just connect the booster between vehicles 12v sockets. Minutes later the battery will be ready for starting."
Price: 27.59 |
| "Draper Draper 6/12V 6A Intelligent Battery Charger" |
| "The Draper 6/12V 6A Intelligent Battery Charger senses the batteries condition and adjusts the charging parameters accordingly. The unit is microprocessor controlled, and enters a float mode when the battery is fully charged, guarding against over-charging and damage.Draper Part Number - 38254 "
Price: 41.99 |
| "Draper Draper RWB6 12/24V Flexible Spigot Base LED Beacon" |
| "The 12/24V Flexible Spigot Base LED Beacon is fully certified for use on road vehicles and ideal for emergencies situations and building site vehicles. This beacon features a spigot connector for use on 12/24V vehicles fitted with power poles.Fitted with a super bright LED cluster producing 400 lumens with settings for different flashing patterns."
Price: 38.39 |
| "Draper Draper MCPL1 450kg Motorcycle Scissor Stand with Pad" |
| "This motorcycle scissor stand from Draper is suitable for use on the floor or on a motorcycle lift, featuring a rubber mat on the platform which helps to prevent damage to underside of your machine. This lift has been fitted with ball bearing rollers for smooth lifting and lowering."
Price: 92.39 |
| "Draper Draper MCPL2 Motorcycle Frame Scissor Lift" |
| "This Draper support stand features a scissor style lifting mechanism which is suitable for use either on a motorcycle lift or on the floor. The top platform of this lift has two sliding ""U"" shaped supports enabling the lift to hold motorcycle subframe down tubes."
Price: 101.99 |
| "Draper Draper RWB5 12/24V Magnetic Base LED Beacon" |
| "The 12/24V LED Beacon is fully certified for use on road vehicles and ideal for emergencies situations and building site vehicles. Heavy duty magnetic base has a protective plastic cover to limit scratches apon application. Fitted with a super bright LED cluster producing 400 lumens, with settings for different flashing patterns."
Price: 41.99 |
| "Laser Laser Tyre Valve Connector Clip On/Open End" |
| "An easy to fit brass tyre valve connector with clip on, open type chuck for quick fitting."
Price: 6.59 |
| "Laser Laser Battery Electrolyte Tester" |
| "Battery Tester for Lead Acid batteries, easy to read with floating discs showing level of charge. Temperature compensating allows hot or cold temperature testing. Readings in both specific gravity and percentage charge. Range 1.145 to 1.260sg Caution: Battery acid causes severe burns. Wear protective clothing and goggles when handling batteries. Rinse tester with fresh water after use."
Price: 7.99 |
| "Laser Laser 5283 - Printer Roll For Laser 5275 Battery Tester With Printer" |
| "Printer roll for the Laser 5275 Automotive Battery Tester With Printer."
Price: 1.99 |
| "Laser Laser 5449 Dial Type Tyre Inflator" |
| "A robust tyre inflator for the professional garage and workshop with an easy to read gauge for accurate measurements and rubber boot protection."
Price: 59.99 |
| "Laser Laser 3993 3/8"" Brake Caliper Rewind Tool" |
| "For use with pneumatic/air tools for brake caliper wind back tools with either pin type or 3/8" D type drives."
Price: 58.99 |
| "Laser Laser Thermal Camera with UV Leak Detector" |
| "This new hand-held thermal imaging camera from Laser Tools combines the function of a surface measuring infrared thermometer with real-time thermal imaging. The device translates thermal energy (heat) into visible light (on screen) to enable analysis of a particular object or area. Instead of just getting a figure for the temperature, you get an on-screen image showing the actual temperature differences of a surface. This lets you see the heat so you know exactly where to target the measurement spot. Easily find unseen hot and cold spots for instant troubleshooting.The Laser 6515 provides fast temperature readings without physically touching the object. It can safely measure hot, hazardous, or hard-to-reach surfaces without contaminating or damaging the object. A big feature of the Laser unit is the sensitivity of the thermal imagery — it usefully shows component outlines to aid subsequent identification of problem areas or components."
Price: 419.99 |
| "Sealey Sealey 2.25 Tonne High Lift Super Rocket Trolley Jack" |
| "Ideal for the garage or serious enthusiast and suitable for 4x4s, cars or light commercial vehicles which require high ground clearance, the Sealey Super Rocket's lifting arm is brought into contact with jacking point in minimal strokes. This strong double rolled chassis is also suitable for loading bodyshop chassis jigs."
Price: 59.98 |
| "Sealey Sealey 2 Tonne Low Entry Short Chassis Trolley Jack" |
| "The Sealey Low Entry Trolley Jack has been designed with a steel chassis and welded castor supports and one-piece hydraulic unit, as well as being fitted with an overload valve, carry handle and finger cover for extra safety.Profiled lifting arm allows low clearance height of just 78mm making this unit suitable for sports and custom cars. Suitable for the hobby user or as an emergency mobile jack."
Price: 39.59 |
| "SIP SIP Winntec Aluminium Air Hydraulic Pump" |
| "This pump has been designed with an effective oil capacity 1600cc and two stage release mechanism."
Price: 419.99 |
| "SIP SIP Winntec 20 Ton Trolley Air Bottle Jack" |
| "This professional quality bottle jack features an aluminium air motor ?which lasts longer and is more reliable, whilst the two stage ram provides a much greater maximum while maintaining a low minimum height level."
Price: 383.99 |
| "SIP SIP 5024 12/24V Pro Booster" |
| "This heavy duty booster from SIP has been designed to easily and quickly jump start engines, with the 12/24V internal battery voltage and high cranking rate. This booster features a durable and hard wearing reinforced case for a long service life."
Price: 599.99 |
| "SIP SIP Winntec 2 Ton Pneumatic Balloon Jack" |
| "This jack allows for extremely fast lifting action and is constructed with an internal telescopic stabiliser which provides improved stability and a powder coated steel frame for improved durability."
Price: 443.99 |
| "SIP SIP Winntec 10 Ton Toe Jack" |
| "This jack is designed to lift objects with low clearance of 30mm, whilst the industrial release valve allows for precise lowering."
Price: 644.99 |
| "SIP SIP Winntec 20 Ton Low Profile Air Bottle Jack" |
| "This bottle jack has been constructed with a specially heat treated cylinder wall and chrome piston machined to exacting tolerances for impoved durability."
Price: 323.99 |
| "SIP SIP Winntec 12 Ton Trolley Jack Stands" |
| "This jack is wheel mounted for easy manoeuvrability and features a pin type support column which adjusts to five different height positions."
Price: 203.98 |
| "SIP SIP 6200 12/24V Pro Booster" |
| "This booster from SIP has been designed with a Hi-Tech casing which is designed to absorb impacts and will not rust. The SIP 6200 offers a portable design and can be used as 12 or 24V."
Price: 755.99 |
| "SIP SIP Winntec 20 Ton Air Bottle Jack" |
| "This bottle jack has been constructed with a specially heat treated cylinder wall and chrome piston machined to exacting tolerances for impoved durability."
Price: 359.98 |
| "SIP SIP 3100 12V Pro Booster" |
| "This SIP Pro Booster has been constructed with a Hi-Tech casing which absorbs impacts and will not rust for improved durability."
Price: 323.99 |
