| "Draper 6mm Bevel Edge Wood Chisel | 56864" |
| "Full length bevel edged blades manufactured from chrome vanadium steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact-resistant polypropylene handles. All blades have blade guards. Display packed."
Price: 4.95 |
| "Draper 555 Piece Split Pin Assortment COTTER/555 56375" |
| "Draper 555 Piece Split Pin AssortmentAssortment of zinc plated split pins in plastic storage case. Display carton.PRODUCT DIMENSION:Height (mm) :206Width (mm) :110Depth (mm) :32"
Price: 18.24 |
| "Draper Diesel and Petrol Engine Timing Kit (13 Piece) | 57629" |
| "For use on Audi, Citroên, Peugeot, Volkswagen and Volvo petrol and diesel engined cars and light commercial vehicles. Manufactured from mild steel with plated finish. Display packed in blow mould storage case."
Price: 9.77 |
| "Draper 150 Piece R Clip Assortment HAIRP/150 56376" |
| "Draper 150 Piece R Clip AssortmentAssortment of R-clips in plastic storage case. Display packed.PRODUCT DIMENSION:Height (mm) :206Width (mm) :108Depth (mm) :30"
Price: 24.32 |
| "Draper 1/8"" BSP 4 Jaw Hydraulic Connector GG2 57859" |
| "Draper 1/8"" BSP 4 Jaw Hydraulic ConnectorFour jaw plated steel connector, threaded 1/8"" BSPT. Safe working pressure 680bar/9800psi. Display packed.PRODUCT DIMENSION:Height (mm) :119Width (mm) :68Depth (mm) :14"
Price: 3.83 |
| "Draper 1.9/16"" 3/4"" Square Drive Elora Bi-Hexagon Socket | 567" |
| "Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.Manufactured to DIN 3124/ISO 2725 and DIN 3120/ISO 1174 Specifications"
Price: 34.52 |
| "Draper 170mm Rigid Delivery Tube and Hydraulic Connector GG8 57817" |
| "Draper 170mm Rigid Delivery Tube and Hydraulic ConnectorCranked high pressure zinc plated tube. Complete with hydraulic connector. Suitable for certain Draper Grease Guns. Safe working pressure 400bar/5800psi. Thread 1/8 BSPT. Display packed.PRODUCT DIMENSION:Height (mm) :248Width (mm) :69Depth (mm) :13"
Price: 5.1 |
| "Draper 7/8 x 15/16"" Elora Deep Crank Imperial Ring Spanner | 5830" |
| "Professional Quality, long series manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Ring ends are accurately broached with chamfered bi-hexagon profiles for easy nut location and are offset at 45°. Sold loose.Manufactured to DIN 838/ISO 3318 Specifications"
Price: 23.02 |
| "Draper 419 Piece O Ring Assortment O-RING/419 56345" |
| "Draper 419 Piece O Ring AssortmentAn assortment O-rings, size range 3mm I.D. x 1.5mm section to 50mm I.D. x 3.5mm section. Packed in blow mould storage case with display sleeve.PRODUCT DIMENSION:Height (mm) :280Width (mm) :176Depth (mm) :53"
Price: 41.57 |
| "Draper 300mm Flexible Rubber Grease Gun Hose GG5 57841" |
| "Draper 300mm Flexible Rubber Grease Gun HoseHigh pressure reinforced rubber tube, threaded 1/8"" BSPT at both ends. Safe working pressure 400bar/5800psi. Display packed.PRODUCT DIMENSION:Height (mm) :400Width (mm) :67Depth (mm) :17"
Price: 8.49 |
| "DRAPER Bandsaw Blade 2105mm x 3/4"" for Model MBS210 Stock No. 38010 | 58555" |
| "For Draper Bandsaws and other manufacturers similar machines. Display packed."
Price: 25.94 |
| "Draper Expert E11 3/8"" Square Drive Tx-Star Socket TS38 56359" |
| "Draper Expert E11 3/8"" Square Drive Tx-Star SocketExpert Quality, manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. Chamfered ends allow positive nut location. Display packed in individual storage hanger with barcode on reverse.PRODUCT DIMENSION:Height (mm) :84Width (mm) :44Depth (mm) :17"
Price: 2.09 |
| "Draper 400ml Anti-Spatter Welding Spray | 5709" |
| "Prevents spatter adhesion on welding equipment, jigs, workpieces and surfaces. Prolongs tip and shroud life. Non-toxic, water-based and CFC free. Sold loose."
Price: 7.45 |
| "Draper 15/16 x 1"" Elora Deep Crank Imperial Ring Spanner | 5856" |
| "Professional Quality, long series manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Ring ends are accurately broached with chamfered bi-hexagon profiles for easy nut location and are offset at 45°. Sold loose.Manufactured to DIN 838/ISO 3318 Specifications"
Price: 25.01 |
| "Draper Expert No 2 x 38mm Cross Slot Mechanics Screwdriver (Display Packed) 870CS 57449" |
| "Draper Expert No 2 x 38mm Cross Slot Mechanics Screwdriver (Display Packed)Expert Quality, chrome vanadium steel blades hardened, tempered with satin chrome plated finish and sand blasted tips. The handle is manufactured from impact-resistant heavy duty soft grip polypropylene with colour coded handles for easy recognition. Most blades have hexagon bolsters which enable extra power to be obtained by use of a spanner (+). Display packed in individual storage hanger with barcode on reverse.PRODUCT DIMENSION:Height (mm) :163Width (mm) :43Depth (mm) :30"
Price: 4.93 |
| "Draper Bandsaw Blade 2460mm x 1"" for Model MBS260 Stock No. 38016 |58562" |
| "For Draper Bandsaws and other manufacturers similar machines. Display packed."
Price: 34.57 |
| "Draper Air Hammer and Chisel Kit | 57676" |
| "General purpose short stroke hammer kit comprising a full range of accessories including panel cutter, rivet cutter, bush splitter, spot weld splitter and piercing cutter. Other individual cutters are available separately. Supplied complete in carrying case. Display carton.Contents: air hammer 5 chisels chisel retaining spring oil pot 1/4"" BSP nipple"
Price: 60.38 |
| "Draper Bandsaw Blade 2460mm x 1"" for Model MBS260 Stock No. 38016 |58563" |
| "For Draper Bandsaws and other manufacturers similar machines. Display packed."
Price: 34.57 |
| "Draper 6 Piece Injector Noid Light Kit INL6/KIT 57798" |
| "Draper 6 Piece Injector Noid Light KitQuick, efficient and economic way to fault find on the following electronic fuel (EFI) systems: GM PFI, GM TBI, GM SCPI, Ford TBI, GEO TBI and Bosch PFI. Packed in blow mould case. Display carton.PRODUCT DIMENSION:Height (mm) :224Width (mm) :110Depth (mm) :55"
Price: 22.75 |
| "Draper Expert 6 x 55mm 1/2"" Square Drive Hexagonal Socket Bit H-HEX 58409" |
| "Draper Expert 6 x 55mm 1/2"" Square Drive Hexagonal Socket BitExpert Quality, socket with insert bit. Socket manufactured from chrome vanadium steel hardened, tempered and chrome plated. The bit is made from S2 silicon steel hardened and tempered with sand blast finish. Overall length including socket 55mm. Display packed.PRODUCT DIMENSION:Height (mm) :116Width (mm) :42Depth (mm) :22"
Price: 7 |
| "Draper 1/2"" Sq. Dr. Deep Impact Nut and Bolt Remover Set (4 Piece) |5726" |
| "Expert Quality, for the removal of damaged, painted over, rounded off and rusted bolts. Special flutes lock on to the workpiece for easy removal. Manufactured from chrome molybdenum steel hardened and tempered with chemically blacked finish. Packed in blow mould case with display sleeve.Contents: 17, 19, 21 and 22mmSpare blades available - contact the Draper Sales DeskPZ TYPE products are compatible with *Pozidriv/Supadriv fixing systems. *Pozidriv/Supadriv are registered trademarks of Trifast Plc."
Price: 25.71 |
| "Draper Bandsaw Blade 2460mm x 1"" for Model MBS260 Stock No. 38016 |58564" |
| "For Draper Bandsaws and other manufacturers similar machines. Display packed."
Price: 34.57 |
| "DRAPER Ergo Plus VDE Screwdriver Set with Interchangeable Blades 18 Piece |5776" |
| "Expert Quality, set of interchangeable screwdrivers, essential for professional electricians. Each screwdriver is fully insulated, permitting use on circuits up to 1000V AC, and 1500V DC, and its reassuring to know, that each and every screwdriver is thoroughly tested to meet the strict safety and accuracy requirements of the VDE, GS, and EN60900:2012 standards. The comfortable soft grip handle, not only prevents your hand from slipping, its also resistant to chemicals, oils and most solvents. The VDE interchangeable blades provides fast, easy, lock and release into the screwdriver, ensuring a safe and secure connection and all are individually tested to 10,000V and fully compliant to EN60900:2012 standards. Each kit contains 5 plain slot VDE blades, 3 cross slot VDE blades, 3 PZ TYPE VDE blades, 4 Draper TX-STAR VDE blades, VDE screwdriver handle, VDE precision screwdriver handle, mains tester and a storage roll for secure transportation. The interchangeable screwdrivers are all fully tested to VDE standards combining safety with versatility. The blade bits in the sets are interchangeable with each different set in the 965 range, so no matter which set you have, you can be safe in the knowledge that the screwdriver blades are interchangeable.Contents: 5 plain slot sizes: 3.0 x100, 3.5 x 100, 4.0 x 100, 5.5 x 100 and 6.5 x 100mm 3 cross slot sizes: No.0, 1 and 2 3 PZ TYPE: No.0, 1 and 2 4 Draper TX-STAR: T10, T15, T20 and T25 x 100mm Mains tester Fully insulated high torque screwdriver handle Fully insulated precision screwdriver handleManufactured and individually certified to EN 60900"
Price: 47.03 |
| "Draper Expert 3/8"" Square Drive Precision Torque Wrench | 58130" |
| "Expert Quality, with reversible ratchet head and locking preset action. Torque values are viewed via a window in the handle. Range 5-22Nm, accuracy ±4%. Overall length 255mm. Full instruction manual and calibration certificate included with each torque wrench. Supplied in blow mould case.Manufactured and calibrated to ISO6789-1992-12-01 Standard"
Price: 116.23 |
| "DRAPER Ergo Plus VDE Screwdriver Set with Interchangeable Blades 10 Piece |5721" |
| "Expert Quality, tested to 10kV, suitable for working on live circuits of 1kV AC and 1.5kV DC. SCVM steel blades hardened, tempered and chemically blackened. Interchangeable insulated blades deep set into handles - precision or high torque types - for total safety. Supplied in storage roll. Display packed.Contents: 4 plain slot sizes: 3.0 x 100, 4.0 x 100, 5.5 x 100 and 6.5 x 100mm 2 cross slot sizes: No.1 and 2 2 PZ TYPE: No1 and 2 Fully insulated high torque screwdriver handle Fully insulated precision screwdriver handleManufactured and individually certified to EN 60900"
Price: 33.68 |
| "Draper 1/8"" BSP Heavy Duty Hook on Connector GG7 57875" |
| "Draper 1/8"" BSP Heavy Duty Hook on ConnectorHeavy duty hook or slide-on connector with plated steel body, threaded 1/8"" BSP. Safe working pressure 80bar/1150psi. Sold loose.PRODUCT DIMENSION:Height (mm) :121Width (mm) :69Depth (mm) :21"
Price: 6.69 |
| "Draper 8-25mm Air Stapler Kit | 57555" |
| "Provides high speed action for the rapid fixing of a wide range of materials such as wood, plastics and fibreglass. Uses staples 8 to 25mm in length. Supplied with accessories and 1000 staples in carrying case and display sleeve.Contents stapler 1000 x 25mm long staples safety goggles oil pot ""quick release"" coupling adaptor 2 x hexagon keys"
Price: 106.25 |
| "Draper 1.11/16"" 3/4"" Square Drive Elora Bi-Hexagon Socket | 583" |
| "Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.Manufactured to DIN 3124/ISO 2725 and DIN 3120/ISO 1174 Specifications"
Price: 37.68 |
| "Draper 15-50mm Air Nailer Kit | 57563" |
| "For use in production environments. Suitable for nails 15-50mm long. Supplied complete in carrying case and display sleeve.Contents nailer 1000 x 50mm long nails safety goggles oil pot ""quick release"" coupling adaptor 2 x hexagon keys"
Price: 167.95 |
