| "Laser Tools 3575 Flywheel Locking Tool - Ford" |
| "Covers most engines in the Ford range (pre 2007) including both petrol and diesel and the Zetec engine.This tool is required on engines where the flywheel and crankshaft must be held at the correct timing position.After attaching the flywheel locking plate, the toothed profile is adjusted and locked after being fully engaged in the flywheel ring gear.OEM No. 303-393/21-168.Applications: Fiesta 1.8 D Turbo, Focus 1.8 D Turbo. Engine codes: C9DC, F9DA/B, C9DA/B, BHDA/B. Year: 1998-2002.Further adaptors are included in Part No. 4275."
Price: 23.67 |
| "Laser Tools 3173 Wiper Arm Removal Tool" |
| "Suitable for spline taper and taper spigots.Suitable for spline taper and tapered spigots.This product is for the removal of stubborn wiper arms.Screw thread and hook feet.Sized for difficult access.Time saver."
Price: 14.08 |
| "Laser Tools 6819 Silicon Hose without Valve 1.2m" |
| "Silicon hose 1.2 m without valve for use with Laser 6783 and other Laser brake bleedersSilicon hose 1.2meters without valveFor use with most Laser brake bleeders including Laser 6783For silicon hose with valve see Laser 682000"
Price: 8.51 |
| "Laser Tools 1776 Door Handle Remover" |
| "Simple tool for griping and rotating door handlesSimple tool for griping and rotating door handlesAvoid damage to the fascia panelSpecially designedTime saverSpecialist bodyshop tool"
Price: 2.32 |
| "Laser Tools 3096 Camshaft Setting/Locking Tool" |
| "This took kit enables the engine timing position to be held when replacing the timing belt on Ford engines including the Zetec engine.Suitable for Fiesta, Puma, Escort, Focus, Courier, Mondeo, Tourneo, Transit, Transit Connect 1.8/2.0.Also suitable for Mazda 121.Includes camshaft locking strap 303-376/21-162B.Crankshaft locking screw OEM 303-574/21-163.Crankshaft TDC locking screw OEM 303-507/21-210."
Price: 14.25 |
| "Laser Tools 4808 Timing Pin Set 2.7D" |
| "This Timing Pin Set is suitable for Peugeot 2.7d and can be used with Laser 4273. Also covers additional applications including Citroen C6 and Peugeot 407 / Coupe 607 (2004-2008) with engine code DT17TED4 (UHZ). OEM codes for the new alignment pins are 0196C and 0195K.Upgrade pin set for Laser 4273Citroen C6 and Peugeot 407/607 CoupeOEM Codes 0195C and 0195KEngine codes DT17 TED 4 (UHZ)2.7d engines"
Price: 15.29 |
| "Laser Tools 4555 Diesel Engine Timing Tool Kit - PSA/Fiat" |
| "A small diesel locking kit specifically assembled to cover the 2.5/2.8 diesel engines found in the Citroën | Renault and Fiat rangesEngine Timing Tool Kit for PSA 2.5/2.8D.Also for Fiat | Iveco | Renault | Vauxhall.Set comprises of setting pin x 2, Flywheel locking pin and tensioner retaining tool.For diesel engines.Time saver."
Price: 21.18 |
| "Laser Tools 4519 Camshaft Crankshaft & Flyweel Locking Tool" |
| "Originally designed for the 16v 1.8/2.0 engines this kit is still relevant as these engines continued up to 2003 and beyondPeugeot 306 1.8 | 2.0 16v | 306 2.0 S16 | Gti-6 406 | 406 Coupe 1.8 | 2.0 16v with LFY | RFV | R6E | RFS engines.Set of 3 timing pins.Flywheel locking tool - OEM ref 0134AF.Suitable for a variety of Citroën, Peugeot engines.2 x Camshaft timing pins (OEM 0153G) 1 x Camshaft (0153AB)."
Price: 32.27 |
| "Laser Tools 3111 Petrol Engine Locking Tool Set" |
| "A selection of timing pins for use on Citroën and Peugeot vehicles with petrol and diesel engines. Includes crankshaft and camshaft timing pins plus tensioning tool.A selection of timing pins for use on Citroën and Peugeot vehicles with petrol and diesel enginesIncludes crankshaft and camshaft timing pins plus tensioning toolThe Laser valve spring compressor - Part No. 3789 may also be needed for these enginesSuitable for AX 1.0/1.1Made in Sheffield"
Price: 21.34 |
| "Laser Tools 4020 Timing Pins - Renault engines" |
| "Crankshaft and camshaft timing pins for Renault 1.5 and 1.9 dCi engines fitted to Laguna, Kangoo and Clio models and popular with the Nissan Micra 1.5 dCi. and Mercedes Benz CitanRenault 1.5 and 1.9 dCi engines fitted to Laguna, Kangoo and Clio modelsAlso: 1.5 dCi engines fitted across the Dacia, Nissan, Suzuki & Mercedes Benz rangesRenault engine code K9K (2002-on), Mercedes 607.951 (K9K) (2012 on)OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)"
Price: 17.2 |
| "Laser Tools 3110 Timing Belt Tensioner - Peugeot" |
| "Timing belt tensioner for Peugeot/Citroën engines.OEM code: 0188Q1, 9767.89, 0132X, 4507-TJFor use on many PSA enginesHolds timing belt tensionerMade in Sheffield8mm square"
Price: 12.18 |
| "Laser Tools 5695 Mirror Switch Removal Pliers - BMW" |
| "Mirror removal pliersRequired when renewing the control switch or when removing the door trim pad on BMW E12/E21/E23/E24/E28/E30/E31/E32/E34/E36/E38/E39 wing mirrorsSpring loaded, soft grip handlesFor removing the mirror control switch from door pad / armrestOEM 61 1 300Essential service tool"
Price: 29.52 |
| "Laser Tools 6738 Petrol Injector Extractor Tool – Mercedes 1.8/1.9lt" |
| "Petrol injector extractor tool for Mercedes Benz M271 engines 2007 onwardsVehicles covered include: C Class, CLC Class, CLK Class, E Class and SLK Class 2007< OEM equivalent 271589023300Use on Mercedes 1.8litre/1.9litre M271 petrol engines to remove the petrol injectors when replacing injector seals or injectors/injector rail serviceThe injector removal tool slides onto the injector, engaging with slots in the side allowing for extractionFor 4.6/5.5 litre engines use Laser Part No 6584"
Price: 29.15 |
| "Laser Tools 6121 Diesel Injector Adaptor - High Pressure M12" |
| "M12 to fit older style injectors equipped with an M12 High Pressure pipe union of the top of the injectorM12Internal0ConsumableMade in Sheffield"
Price: 16.58 |
| "Laser Tools 6120 Diesel Injector Adaptor - Siemens" |
| "Required for Siemens InjectorsM27External0ConsumableMade in Sheffield"
Price: 19.89 |
| "Laser Tools 6119 Diesel Injector Adaptor - Denso" |
| "Required for Denso InjectorsM20ExternalConsumable 0Made in Sheffield"
Price: 19.89 |
| "Laser Tools 6118 Diesel Injector Adaptor - Siemens" |
| "Required for Siemens Injectors - ExternalM25Pack of 1ExternalConsumableMade in Sheffield"
Price: 33.88 |
| "Laser Tools 5781 Hose Clip Tool 3/8""D" |
| "Hose clip tool in 3/8""D 3/8 ""DFor hose clips found on modern enginesIdeal for difficult access areasJaw Opening 40mmTime saver"
Price: 25.28 |
| "Laser Tools 6822 Fuel Line Disconnect Tool" |
| "Fuel line disconnect tool oem numbers are on the attached paperworkApplication: Alfa Romeo, Audi, Chrysler, Citroen, Fiat, General Motors, Lancia, Opel, Peugeot Saab, Skoda, Vauxhall and VolkswagenSuitable for quick disconnection joints found on the many manufacturers details OEM Nos include: VAG 6XO 201 511, PSA 1567.89/88/C4, General Motors 25313359, Opel 818.568 and Vauxhall 25313359For full details including Alfa Romeo, Fiat and Lancia please visit our websiteCovers 5/16"" and 3/8"" tube"
Price: 4.36 |
| "Laser Tools 6766 Ignition Coil Puller Set 2pc - Vauxhall/Opel" |
| "Ignition puller set for use on most GM vehicles such as Corsa/Astra/Zafira etcSpecifically designed to pull out the ignition coil - Equivalent to OEM KM 6009Applications: Agila-A, Astra-F/G/H/J, Calibra, Combo, Corsa-B/C/D, Frontera-A/B, Insigna, Mervia-A/B, Omega-B, Signum, Tigra-A/B, Vectra-B/C, Zafira-A/BManufactured from S45C with PA6 handleEngine Codes: LDD, LDE, LLU, LUH, LUJ, 2HO, A10XEP, A14NEL, A14NET, A14XER, X14NZ, X14SZ, X14XE, A16LET, A16XER, X16SZR, X16XE, X16XEL, A18XER, X18XE, X20SE, X20XEV, X22SE, X22XE, Y22SE, Z10XEP, Z12XE, Z12XEP, Z14XE, Z14XEL,Z14XEP, Z16LEL,Z16LER, Z16LET, Z16XE, Z16XER, Z16YNG, Z18XE, Z18XER, 20LEH, Z20LER, C22SEL) Two piece set for two handed removal"
Price: 6.69 |
| "Laser Tools 6122 Diesel Injector Adaptor - Delphi" |
| "Required for Delphi injectorsM14Internal0ConsumableMade in Sheffield"
Price: 20.26 |
| "Laser Tools 3322 Hose Clip Driver - Flexi 6mm" |
| "Individual hose clip drivers. Range available: 5 | 6 | 7 | 8 | 10mm.Size: 6mm170mmFlexi shaftContoured handle for easy gripFurther sizes available: 5 | 7 | 8 | 10mm"
Price: 7.04 |
| "Laser Tools 3321 Hose Clip Driver - Flexi 5mm" |
| "Individual hose clip drivers. Range available : 5 | 6 | 7 | 8 | 10mm.Size: 5mm170mmFlexi shaftContoured handle for easy gripFurther sizes available: 6 | 7 | 8 | 10mm"
Price: 6.9 |
| "Laser Tools 3305 Hose Clamp Plier 2pc" |
| "For all flat band and ring hose clamps. 1 x cross slotted jaw type and 1 x wide flat band jaw type. Ratchet mechanism for ease of installation and removal.2 pieces.For all flat band and ring hose clamps.1 x cross slotted jaw type.1 x wide flat band jaw type.Ratchet mechanism for ease of installation and removal."
Price: 38.73 |
| "Laser Tools 4136 CV Boot Clamp Pliers" |
| "These heavy duty CV boot clamp pliers can be used by hand or with the assistance of a power bar if required. Also suitable for installation of certain clamps on fuel filters, water pumps and other cooling system hoses.Heavy dutyCan be used by hand or with the assistance of a power bar if requiredAlso suitable for installation of certain clamps on fuel filters, water pumps and other cooling systemsPVC dipped handles for comfortTime saver"
Price: 27.72 |
| "Laser Tools 3174 Steel Band for CV Boot 2pc" |
| "Banding for securing the new CV boot once in place. Use in conjunction with Laser CV boot tool - Part No. 2916.Banding for securing the new CV boot once in placeUse in conjunction with Laser CV boot tool - Part No. 29162 piece (550mm long x 6.3mm wide)Consumable itemSpecialist tool"
Price: 4.85 |
| "Laser Tools 5974 In-Line Diesel Pump Locking Screw - Bosch" |
| "Bosch In-Line Diesel Fuel Pump Timing Pin for Mercedes.Bosch In-Line Diesel Fuel Pump Timing Pin for Mercedes.Application 200D/E200D/250D/E250/E250D/E250/250D/E250/300D/E300/200TD/300TD/190DSimilar to OEM 601 589 0521 00Enables the injection pump timing to be setFull application list available"
Price: 13.74 |
| "Laser Tools 2929 Drive Shaft Circlip Tool - GM" |
| "To remove or replace drive shaft lock rings for CV joint servicing. This tool also spreads the ears of the wheel cylinder retaining clips on some vehicles.Specifically for Vauxhall/OpelFor CV boot servicingKnurled head threaded adjusterAlso spreads the ears of the wheel cylinder retaining clipsTime saver"
Price: 12.27 |
| "Laser Tools 3881 Hose Clip Pliers" |
| "A special set of pliers for fitting O-ring style hose clips. Soft grip handle for added leverage.A special tool for fitting ear clamps/compression clips.Soft grip PVC dipped handle for easy comfortable use.Shape of jaws allows easy access from both sides of the hose.Black coated for durability.Time saver."
Price: 19.26 |
