| "Laser Tools 3517 Alloy Wheel Brush" |
| "Tough bristles remove dirt and brake dust without scratching the alloy.Removes dirt and brake dustFlexible head for cleaning inside wheelsPlastic handleTough bristlesWill not scratch the alloys"
Price: 2.68 |
| "Laser Tools 3788 Engine Timing Tool Kit - Fiat 1.2 16v" |
| "For use on the latest 1.2 16v Fiat engines including: Bravo | Brava | Punto | Stilo with engine codes: 176 B9 000 | 182 B2.000 | 188 A5.000.For use on the latest 1.2 16v Fiat enginesApplications: Bravo | Brava | Punto | Stilo with engine codes: 176 B9 000 | 182 B2.000 | 188 A5.000Piston height gauge (pair) - OEM 1 860 992 000Camshaft setting tools (2) - OEM 1 860 985 000Tensioning tool - OEM 1 860 987 000"
Price: 111.36 |
| "Laser Tools 3752 Vacuum/Pressure Test Kit" |
| "This vacuum and pressure pump creates and holds a metered vacuum for testing a wide variety of automotive, marine, aircraft and agricultural equipment. Vacuum testing applications include: automatic transmission, vacuum reservoirs, air conditioning and heating, heater cones, brake systems including ABS and conventional, engine management systems, emission control systems, fuel systems, engine tuning, ignition systems, engine management including cylinder heads, valve stem oil seals, piston ring retainers on diesel engines, waste gases on turbo chargers. Can also be used for one-man brake bleeding.Dual function - vacuum: 0-30 in vacuum (0 to -1 bar)Pressure: 0-60psi (0 to 4 bar)Simply select the air intake control valve on the pumpOut for pressurised systems/In for testing vacuumsIdeal for a wide range of applications on many vehicles including motorcycle brake bleeding"
Price: 114.63 |
| "Laser Tools 3800 Bush Removal Tool - Vauxhall Vectra" |
| "For removing and replacing the rear, upper and lower bushes on trailing arm suspensions for Vauxhall Vectra models. Improved designed for a better performance and supplied with a spare rod in case of damage.For removing and replacing upper and lower suspension bushes on trailing arms.For use on Vauxhall Vectra B models (>2002).Always lubricate nut and bar before and after use. Two bars are included with this set.Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)Spares available for bar and nut (bar - Part No. 0673, nut - Part No. 0674)."
Price: 85.13 |
| "Laser Tools 3631 Camshaft Locking Tool - Fiat" |
| "Camshaft locking tools for Fiat Brava | Bravo | Marea | Marea Weekend 1.8 16v. OEM Ref. 1 860 875 000.OEM Ref. 1 860 875 000For 1.8 16v enginesUse tool marked E1 on inlet camshaft on No. 2 cylinderUse tool marked E2 on exhaust camshaft on No. 3 cylinderMade in Sheffield"
Price: 41.6 |
| "Laser Tools 3794 Locking Chain Clamp" |
| "Suitable for use on old style oil filters. Also useful as a grip wrench on stubborn parts and Citroën suspension spheres.Suitable for use on old style oil filters.Also useful as a grip wrench on stubborn corroded parts such as Citroën suspension spheres.475mm long chain gives 140mm dia. max.Snap lock grip handle.Time saver."
Price: 21.05 |
| "Laser Tools 3673 Motorcycle Brake Piston Removal Tool" |
| "This tool has been designed to drastically reduce the time taken when dismantling motorcycle brakes. This tool has been designed to drastically reduce the time taken when dismantling motorcycle brakes with sliding calipers.Removes frozen pistons with ease.Includes 12 universal adaptors.Sizes 19-30mm.Will not mark or damage the working part of the piston."
Price: 117.79 |
| "Laser Tools 3780 Exhaust Spring Clamp Remover Selected Steel" |
| "Removes and replaces the exhaust manifold spring clamp on early Volkswagen models fitted with four cylinder water cooled engines.Specifically for use on early Volkswagen models fitted with water cooled 4cyl engines.Removes and installs the manifold spring clamp.Selected steel.Time saver.Packaged in a sliding blister."
Price: 37.88 |
| "Laser Tools 3615 Timing Locking Tool Kit - Universal 8pc" |
| "A collection of the most popular locking tools for camshafts, crankshafts and flywheel pulleys including those fitted to Citroën | Peugeot | Fiat | Rover | Saab | Vauxhall/Opel | Volkswagen | Audi | Skoda | Seat. Supplied in a metal storage case with full application list and OEM codes.A collection of the most popular locking tools for camshafts, crankshafts and flywheel pulleys.For Citroën | Peugeot | Fiat | Rover | Saab | Vauxhall/Opel | Volkswagen | Audi | Skoda | Seat.Full application list and OEM codes.Good starting kit for some of the most popular engine timing tools.Supplied in metal storage case."
Price: 74.58 |
| "Laser Tools 3802 Oil Filter Wrench - 76mm x 8 Flutes" |
| "A cup style oil filter wrench for use on Fiat, Lancia plus Moto Guzzi and Ducati motorcycles.Cup style oil filter wrench.76mm x 8 flutes. (76.2mm across the points, 74.3mm across the flats).3/8""D.Specifically for use on Fiat, Lancia plus Moto Guzzi and Ducati motorcycles.0"
Price: 6.6 |
| "Laser Tools 3659 Oil/Fluid Extractor" |
| "This extractor is designed to vacuum fluids from inaccessible or confined areas. It is ideal for oil changes on boats, cars, motorcycles, outdoor power equipment, industrial machinery etc. Also handy to remove bilge water from boats, trapped water in plumbing systems etc. DO NOT USE WITH PETROL OR OTHER FLAMMABLE LIQUIDS.Designed to extract fluids from inaccessible or confined areas.Ideal for oil changes on boats | cars | motorcycles.Also suitable for use on outdoor power equipment and industrial machinery.6 litre capacity.Handy to remove bilge water from boats, trapped water in plumbing systems etc."
Price: 67.21 |
| "Laser Tools 3744 Combination Screw Extractor & Drill Set" |
| "Handy set with screw extractors and drills logically paired for easy selection.5 x spiral extractors.5 x HSS drill bits.Sizes: 5/64"" (3mm), 7/64"" (3.5mm), 5/32"" (4mm), 1/4"" (6.5mm), 19/64""(7.5mm).Titanium coated drill bits.Short size allows access to awkward areas."
Price: 29.63 |
| "Laser Tools 3791 Timing Tool Kit - Alfa Romeo" |
| "Timing belt tensioner for Alfa Romeo V6 24v engines OEM Ref. 1 860 950 000. Applications include: 156/166 2.5/3.0 V6 24v engines (1997-2002) and GTV 2.0 V6 24v engines (1997-2002) with engine codes: 161-02 | 324-01 | 342-01 | 343-01 | 932A.000.Timing belt tensioner for Alfa Romeo V6 24v enginesApplications include: 156/166 2.5/3.0 V6 24v engines (1997-2002) and GTV 2.0 V6 24v engines (1997-2002) with engine codes: 161-02 | 324-01 | 342-01 | 343-01 | 932A.000OEM Ref. 1 860 950 000Made in SheffieldEssential service tool"
Price: 97.47 |
| "Laser Tools 3734 Stud Extractor Set - Short Series | 4pc" |
| "Short series stud extractor set with concentric roller action with reverse off action, allows access to awkward areas. Manufactured from Chrome Vanadium and supplied in a blow mould case.4pc.6mm and 8mm are 3/8"" drive, 10mm and 12mm are 1/2""D.Concentric roller action.Left/right handed thread.Repair kits available: 6mm - Part No. 0777, 8mm - Part No. 0778, 10mm - Part No. 0779, 12mm - Part No. 0780."
Price: 43.65 |
| "Laser Tools 3787 Engine Timing Tool Kit - GM engines" |
| "Designed to cater for the dCi 2.2/2.5 diesel chain, belt and gear driven engines found in some later Nissan light commercial vehicles.This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines.Also for use on some Renault engines.For Interstar 2.2 and 2.5 dCi.Engine codes: G9U, G9T (2002-2010).Metal case available - Part No. 4536."
Price: 158.31 |
| "Laser Tools 3813 Diesel Fuel Pump Priming Tool" |
| "This pump can be used to prime most diesel fuel pumps including diesel boat engines. Pump from Laser Tools Part No. 3463.Suitable for priming fluids on diesel engines.Ideal for cars and boats etc.Connect to any length of hose.One way function only.Simple and effective."
Price: 8.67 |
| "Laser Tools 3628 Camshaft Locking Tool - Alfa Romeo" |
| "A pair of camshaft locking tools which can be used separately as inlet and exhaust camshaft locking tools. Suitable for Alfa Romeo 145 | 146 1.8 | 2.0 Twin Spark (1996>) and 155 | 156 | Spider | GTV 2.0 16v () and 155/156/Spider/ GTV 2.0 16v ("
Price: 41.62 |
| "Laser Tools 3835 Brake Caliper Rewind Tool Kit - 18pc" |
| "This set includes right and left hand threaded rewind tools with 2 pin fixed drive, reaction plate plus 15 adaptors which fit a variety of modern cars.15 special adaptors and reaction plate.Fixed 2 pin drive.Left and right hand threaded screw and T-bar.Application list.Provided in a blow mould case and complete with instructions."
Price: 80.01 |
| "Laser Tools 3627 Camshaft Locking Tool - Alfa Romeo" |
| "Engine locking tools with specifically machined profiles for locking the camshaft in the exact timing position.Engine locking tools with specifically machined profiles for locking the camshaft in the exact timing positionInlet camshaft use A1 on No. 1 cyl. and A4 on No. 6 cylinderExhaust use A2 on No. 1 cyl. and A3 on No. 4 cylinderOEM Ref. 1 825 040 000Engine codes: 2.5 V6 engine codes 324.01, 324.05, 342.01, 362.01 and 3.0 V6 engine codes 161.02, 161.05, 343.01, 361.01"
Price: 79.92 |
| "Laser Tools 3829 Inner Tie Rod Tool - Multi Purpose" |
| "Use to replace the inner tie rod ends without replacing the rack and pinion Capacity 33-42mmUniversal use.Capacity 33-42mm.Use to replace the inner tie rod ends without replacing the rack and pinion.Robust tool.Main body: (H) 32.70mm, (W) 58mm, (L) 70.21mm, Overall height 57.41mm"
Price: 50.29 |
| "Laser Tools 3719 Fluid Transfer Tool" |
| "For use on cars, motorcycles and boats etc. Suitable for priming Ford Mondeo diesel engines.Suitable for cars | boats. Also household plumbing systems.Self priming.175mm overall length. Pipes are 900mm long.Quick and effective for water and other liquids. Not suitable for petrol.Instructions included."
Price: 16.47 |
| "Laser Tools 3773 Engine Timing Tool Kit - Ford Duratorq" |
| "Allows removal and replacement of timing belts/chains on the Ford Duratorq engines.A special 5 piece kit containing the necessary special pins for 2.0 and 2.4 litre chain driven enginesFor 1.4 TDCi Fiesta and Fusion (2002-2009)Also 2.0 TDCi Mondeo chain engine, 2.2 TDCi Mondeo (04-07)Plus 2.0 TDCi Tdi Transit (00-08)2.4 Tdi Transit (00-08)"
Price: 23.95 |
| "Laser Tools 3581 Engine Timing Tools - GM" |
| "This set of timing tools enables the correct timing position to be made when servicing Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models. Also suitable for use on Saab 9-3 with 2.2D Turbo engine.Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models.Also suitable for use on Saab 9-3/9-5 with 2.2D Turbo.OEM Code No: Saab 83 95 394/337/352/386.0Metal case available - Part No 4536."
Price: 125.66 |
| "Laser Tools 3580 Engine Timing Tools - GM" |
| "This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.For 1.0 12v X10XE and 1.2 16v X12XE enginesAgila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-BWith X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codesChain driven engines1993-2010"
Price: 53.65 |
| "Laser Tools 3840 Measuring Jug - 1 Litre" |
| "Suitable for all types of fluids including petrol and diesel, with cap and see-sthrough body for visual measurement. Metric and imperial measurements. Complete with flexi-spout.1 Litre capacity.Metric and imperial measurement.Flexi spout with cap.Includes cap for jug.Translucent container for easy visibility."
Price: 5.23 |
| "Laser Tools 3899 Cambelt Tension Gauge" |
| "This tensioning gauge can be used to adjust the tension on the cambelt where the movement of the timing belt is measured by load (Nm). Suitable for use on cambelts with various belt widths. Easy to use with clear incremental marking with knurled knob for precise measurement. Dual scale allows reading from top or bottom of tool.Suitable for belts of varying thicknessDual scale allows measurement to be taken from top or bottomKnurled knob for precise measurementEasy to useClear incremental marking"
Price: 75.63 |
| "Laser Tools 3940 Brake Caliper Rewind Tool - BMW Mini" |
| "An essential tool for routine maintenance on rear brake calipers on BMW Mini. The set includes the special adaptor OEM No. 34 6 300/301 and reaction plate OEM No. 34 6 307.Special reaction plate (OEM No. 34 6 307).3/8""D.Complete with special adaptor 21 (also available separately - Part No. 3941) (OEM No. 34 6 300/301).Designed specifically to rewind the rear brake caliper on pre 2007 models (R50, R52 and R53).An essential tool for routine maintenance."
Price: 31.57 |
| "Laser Tools 3935 Brake Caliper Rewind Tool - Left Hand" |
| "A set of brake caliper rewind tools for vehicles with left handed threaded brake pistons.Fixed 2 pin drive.For vehicles with left handed threaded brake pistons. (Right hand thread adaptor available - Part No. 2828).Citroën C5: the right hand front caliper has a left handed threaded front caliper whilst the left hand caliper has a right handed threaded caliper. Both use a K1 adaptor, included in this set.Renault Master Van: both front calipers require the use of the left handed threaded screw and reaction nut plus K2 adaptor.Ideal for Citroën C5 and Renault Master Van."
Price: 43.35 |
| "Laser Tools 3978 Locking Tool Set - VAG | Ford" |
| "Three engine timing tools for Volkswagen and Audi TDI PD engines. Includes tensioner locking tool, crankshaft setting tool and injection pump locking for Volkswagen Passat 1.9 and Audi A4/A6 1.9 engines. Includes Injection pump locking pin (OEM 3359/T20102), tensioner locking tool (OEM T10008/310-084/23-058), crankshaft locking tool (OEM T10050/310-085).Three engine timing tools for Volkswagen and Audi TDI PD enginesIncludes tensioner locking tool OEM Ref. T10008Setting tool and injection pump locking for Volkswagen Passat 1.9 and Audi A4/A6 1.9 engines. Includes injection pump locking pin (OEM 3359/T20102/U40074)Also fits Seat Alhambra, Altea, Arosa, Cordoba, Ibiza, Leon, Toledo 1.4/1.9/2.0 TDI PD enginesLaser Part No. 4199 for arrow markings at 1 o'clock position (oval) T10100"
Price: 23.6 |
