| "Laser Tools 6115 Digital Display Circuit Tester" |
| "Digital display circuit tester for 6/12/24 volt systemsFor Direct Current (DC) systems onlySuitable for use on 6/12/24 volt systems. Do not use on Air BagsVoltage measurement and display from 5-28 volt. Accuracy +/- 3% - Testing current"
Price: 40.85 |
| "Laser Tools 6180 Front Lower Arm Rear Bush Tool - Land Rover" |
| "Part of the Laser Suspension Bush Tools for Land RoverFront Suspension, Lower Arm, Rear Bush removal & installerEquivalent to OEM 204-535A for use with OEM Hydro Bushes RBX500291Can be used on the vehicle saving time and money. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)Applications : Land Rover Discovery 3 & 4 ( 2004 on ), Range Rover Sport ( 2005 on ) Made in Sheffield"
Price: 224.83 |
| "Laser Tools 6132 Air Hammer Nut Removal Tool" |
| "Part of the Air Hammer accessory tool rangeEssential workshop toolThe vibrating pin applies the pulse from the air hammer to the nut or bolt dislodging rust and allowing it to be removed Length 190mm width 65mmDesigned to fit a maximum nut hex size of 24mm For use with Laser Air Hammer - Part No 6031"
Price: 111.53 |
| "Laser Tools 6193 Rear Suspension Bush Tool - Land Rover" |
| "Part of the Laser Tools Bush Tools for Land RoverRear Suspension, Upper Hub Bush removal & installerEquivalent to OEM 204-530 (Designed for OEM bush RHF500100)Can be used in situ which saves time and reduces the dismantling required. Consumable spares available - Part Nos 1319, 1803. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)Applications : Discovery 3 & 4 ( 2004 on ), Range Rover Sport ( 2005 on ) Made in Sheffield"
Price: 93.32 |
| "Laser Tools 6099 Adaptor - 3/4""D > 1/2""D" |
| "Part of the Laser Tools Socket Accessory rangeSocket adaptor: 3/4""D (F) > 1/2""D (M) Manufactured from Chrome MolybdenumReplaceable 1/2""D (M) x 17mm Hex supplied (consumable) - Part No 2479Black finishReplaceable parts:"
Price: 16.14 |
| "Laser Tools 6192 Fuel Tank Locking Ring Remover 1/2""D" |
| "Part of the Laser Tools Fuel Sender wrenches on BMW/Mercedes/Volvo/Vauxhall/Opel diesel and petrol models Vauxhall/Opel Applications include: Antara from 2007, Astra-J from 2010, Insignia from 2009, SIGNUM 2003 to 2008, Vectra-C 2003 to 2008. Equivalent to Vauxhall/Opel OEM EN-48279 Applications: Mercedes Benz W204/W207/W212 E & C ClassApplications: BMW/F01/F02/F10/F12, 7, 6 & 5 series Applications: Volvo T4/T5 engine 2010 onwards and S40, V400"
Price: 59.51 |
| "Laser Tools 6131 Tyre Bead Depresser" |
| "Part of the Laser Wheels and Tyres rangeHolds the tyre bead down to help removal.Made from PA and 30% fibre for strengthUniversal tyre changing toolSize 130mm x 72mm x 160mmWeight 290gm"
Price: 28.3 |
| "Laser Tools 6190 Fuel Sender/Pump Clamping Ring Removal Tool VAG" |
| "Part of the Laser Tools range of Fuel Sender wrenchesApplications 2000"
Price: 35.26 |
| "Laser Tools 6116 Wheel Internal Thread Kit" |
| "For use on vehicles that use wheel boltsApplications include: M12 x 1.25 for PSA, M12 x 1.5 for Mercedes Benz and BMW, M12 x 1.75 for Volvo and M14 x 1.5 for VAG modelsAssociated Laser products include 5648 and 5216Best results when used with an impact gunPacked in a blow mould caseDue to the nature of the products these tools are consumable"
Price: 24.93 |
| "Laser Tools 6191 Front Crankshaft Oil Seal Fitting Tools - Ford/JLR" |
| "Part of the Laser Tools crankshaft alignment rangeFor use on Duratorq enginesApplications Ford Transit, Ranger with 2.0/2.2/2.4/3.2 TDCi/TDDi engines plus Jaguar X Type X400 and Land Rover DefenderThis kit is required when you replace the crank seal and when you remove the front engine cover to replace the chainOEM 303-679A and 303-682Made in Sheffield"
Price: 77.77 |
| "Laser Tools 6111 Flywheel Locking Tool Set - BMW/Mini" |
| "Part of the BMW Mini engine timing tool rangeFlywheel holding tool set BMW MiniApplication: Chain driven petrol and diesel enginesIncluding: BMW M47T2, M57T2, M67, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54Plus BMW Mini with W17 diesel engineOEM 11 8 180, 11 8 181, 11 8 182, 11 8 183, 11 8 184, 11 8 185"
Price: 69.65 |
| "Laser Tools 6117 Letter and Number Punch Set" |
| "Stamp set for marking tools, cycles and equipmentLetter and number stamp set ideal as security or for information and identificationSize of mark 4mmIdeal for stamping parts | tools | cycles etcPlastic storage caseConsumable"
Price: 40.78 |
| "Laser Tools 6219 Damaged Nut and Screw Remover" |
| "Part of the Laser Tools workshop rangeFor the removal of damaged /rusted/rounded off nuts and bolts and for removing rusted screws in hard to reach placesContents: 12 specialist sockets 8,9,10,11,12,13,14,15,16,17,18,19mm x 3/8""D Plus 4 x 36mm long bits Ph2/Ph3, Flat 8/10mm, 2 x 80mm long bits Ph2, Flat 8mm and 1 x 5/16"" bit adaptorThe sockets have a fluted design and are suitable for AF/Metric sizes. They can be used with the impact driver provided or with 3/8""D ratchets and power barsPacked in a high quality blow moulded case with metal clip, eva foam with a wipe clean surface"
Price: 59.33 |
| "Laser Tools 6232 Wheel Nut Key Set - Audi 22pc" |
| "Part of the Laser Tools Wheel and Tyre range A locking wheel nut key set equivalent to T40073Applications: Audi vehicles20 x Locking wheel nut keys - suitable for tyre fitting bays and garagesComplete with 21mm x 1/2""D locking adaptorIncludes removal punch"
Price: 113.71 |
| "Laser Tools 6205 Digital Torque Ratchet 1/2""D" |
| "Ratchet with digital Torque read-out1/2""D x 275mm longRange 20-100Nm (14.8-73 ftlb) accuracy plus or minus 3%Automatic shut off72 teeth ratchetPacked in a blow mould mold case"
Price: 58.73 |
| "Laser Tools 6220 Wing Cover - Anti Slip" |
| "Part of the Laser Tools workshop rangeAnti slip surface which is easy to clean with soap and waterResistant to oil, grease, water and other liquidsSize 900mm x 610mm x 5mm - large size to prevent damage No magnets which can damage bodywork Meets ROHS non toxic EN71"
Price: 25.97 |
| "Laser Tools 6230 Engine Timing Tool Kit - VAG 3cyl 4v" |
| "Part of the Laser Tools range of timing tools for VAG.Application: 3 cylinder VAG engine currently found in the Volkswagen UP! engine code CHYA,CHYBPlus Seat Mii and Skoda CitigoAlso for Blue Motion and Ecomotive plus Green Tech enginesCamshaft belt tensioner wrench available - Part No. 6199 (OEM T10499)Made in Sheffield. Parts of this kit are registered design"
Price: 63.7 |
| "Laser Tools 6198 Universal Oil Funnel Set 2pc" |
| "Part of the Laser Tools Workshop rangeUniversal oil funnel set 2 pcInnovative clamp keeps funnel in position allowing the user to pour with both handsHelps to prevent spillageTransparent lower chamber shows oil flowFunnel 250mm deep x 125mm diameter"
Price: 32.67 |
| "Laser Tools 6207 Digital Torque Ratchet 1/4""D" |
| "Ratchet with digital Torque read-out1/4""D x 200mm longRange 6-30Nm (4.4-22.1 Ftlb) accuracy plus or minus 4%72 teethAutomatic shut offPacked in a blow mould case"
Price: 60.93 |
| "Laser Tools 6249 PD Injector Alignment Kit - VAG" |
| "Professional alignment check and adjustment of the P/D unit and installation of O rings.Precise positioning of the pump/nozzle unitApplication: Volkswagon Phaeton and Touareg from 2003, T5 from 2004, Audi A3 from 2004. (4 Cylinder 4 valve per cylinder engines, 5-cylinder and 10-cylinder diesel engines) Includes the P/D Injector alignment and injector seal fitting toolsEquivalent to OEM T10210 (PD Injector setting gauge) and T10056 (brass components)Can be used with Laser Part No 5478 PD injector removal kit"
Price: 40.85 |
| "Laser Tools 6238 Diesel Fuel Filter Wrench - Volvo" |
| "Part of the Laser Tools range of tools for Diesel enginesApplication:Application dates: V70 (from 2008), XC70 (from 2008), S80 (from 2006), XC90, V70 (2000 to 2008), V70 XC (from 2001) / XC70 (up to 2007), S60, C30, C70 (from 2006), S40 (from 2004), V50, S80 (from 2007) 0Engine numbers; D4204D, D4204T5, D5204T2, D5204T3, D5204T7, D5244T, D5244T10, D5244T11, D5244T12, D5244T14, D5244T15, D5244T16, D5244T17, D5244T18, D5244T19, D5244T2, D5244T23, D5244T3, D5244T4, D5244T5, D5244T6, D5244T7Equal to OEM 999 70843/8""D"
Price: 20.64 |
| "Laser Tools 6237 Fuel Tank Locking Ring Tool - Volvo" |
| "Part of the Laser Tools Specialist tool rangeApplications: V70 (2000-08), S80, XC70 ("
Price: 44.54 |
| "Laser Tools 6233 Tyre Valve Stem Cutting Pliers" |
| "Part of the Laser Tools Wheel and Tyre range Tyre valve cutting pliersLength 230mmMaximum opening 30mm x 18mm cutting jawIdeal for use in tyre shops and garagesFor replaceable Tyre valves see our Connect Workshop Consumable range"
Price: 23.95 |
| "Laser Tools 6252 Bearing Race and Seal Driver" |
| "All in one, self contained precision driver with 3 adjustable jaw sizesDurable, sturdy aluminium constructionSteel capped striker shaft/handleJaws range from 18.5-89mm (0.73-3 1/2"")Knurled drive with Hex locking keyHandles seat races, bearings and seals with ease"
Price: 95.69 |
| "Laser Tools 6276 Wheel Nut Key Set - BMW 21pc" |
| "A set of Wheel Nut Locking keys for BMW the pre F type models21 essential wheel nuts lock keys equivalent to BMW OEM 36 1 300. The kit includes the contents of Part No 6168 (OEM 36 1 335)The BMW and Mini series covered by this kit are: BMW: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, BMW Mini: R50, R52, R53 Includes 17mm wheel nut drive socket x 1/2""D. Manufactured from SCM440 steel and chrome platedTamperproof: 13pt, 15pt, 16pt, 17pt, 18pt, 19pt, 20pt, 21pt, 22pt, 23pt and Non tamperproof 7pt, 8pt, 9pt, 10pt 11pt, 12pt, 13pt, 14pt, 15pt, 16ptOnly supplied to genuine motor traders /garages. For later clover leaf style locking wheel nuts see Laser 6169/6275"
Price: 96.03 |
| "Laser Tools 6197 Ratchet Screwdriver c/w 10 Bits" |
| "Part of the Laser Screwdriver rangeRatchet Screwdriver with forward, lock and reverse mechanismBit Set in handle includes: PzDrive Pz1/Pz2/Pz3, Phillips Ph1, Ph2, Star T25/T30/T40 and Flat 5mm/7mmStainless steel shaft with magnetic bit holder. Bits are manufactured from S2 Silicon SteelSoft ergonomic grip handleKnurled shaft"
Price: 14.32 |
| "Laser Tools 6223 Combination Spanner Set - 6 Pt 14pc" |
| "Part of the Laser Tools Spanner rangeSingle hex ring end gives increased torque capacity when loosening tight fixings.Sizes: 6/7/8/9/10/11/12/13/14/15/16/17/18/19mmReduced chance of rounding off the fixing when compared to more traditional 12 point (bi-Hex) ring spanners. Manufactured from Chrome Vanadium CV6140Packed in a storage wallet"
Price: 67.27 |
| "Laser Tools 6269 Circuit Tester with Nixie Display" |
| "12 volt circuit tester with Nixie style display for clearly visible voltage readings (even in poor light).Powered from the power source being measured, no batteries requiredFor use on 12/24/48 volt systemsCable length 1.8mStainless steel probeDisplays negative connection with a green LED and buzzer"
Price: 37.26 |
| "Laser Tools 6222 Engine Timing Tool - Mercedes Benz" |
| "Part of the Laser Tools Engine Timing Tool range for Mercedes BenzCamshaft alignment blocks and crankshaft turning tool for pre 2012 Mercedes Benz M651 Engines Applications: Mercedes Benz 1.8/2.1 CDI diesel engines >2011Fitted to C Class, CLS, E Class, GLK, M Class, S Class, Sprinter, Viano and VitoEquivalent to OEM 651589014000For post 2011 applications use in combination with Laser 6813 cam locking tool (OEM 65189094000), available separately"
Price: 110.62 |
