| "Sealey HVLP02 | HVLP Suction Feed Spray Gun 1.7mm Set-Up" |
| "Suction feed spray gun designed for applying base coats. Features air and paint flow controls for fine adjustment of spray pattern. HVLP Technology and precision engineering delivers consistent and unrivalled results. Suitable for water based paints."
Price: 129.95 |
| "Sealey VSE6168 | Crankshaft Pulley Bolt Installation Kit - BMW" |
| "Crankshaft holding kit for BMW N62/N73 chain drive engines. Kit contains tools to secure the crankshaft allowing the pulley securing bolt to be tightened at the correct torque. Also includes a useful socket for removing/tightening the VVT unit on the left bank on N73 engines."
Price: 118.13 |
| "Sealey SGA2 | Oxyacetylene Welding Torch Set" |
| "Welding torch supplied with mixer nozzle and No's 2, 5 and 10 nozzles."
Price: 121.68 |
| "Sealey SA51 | Air Needle Scaler 32mm Stroke" |
| "Suitable for cleaning heavy paint and rust scale from metal surfaces. Palm control trigger mechanism. Replacement needle sets available."
Price: 145.12 |
| "Sealey VSE4781 | Front Suspension Bush Tool - VAG" |
| "Suitable for the removal/installation of the rear mounting bush on the front lower wishbone. Can be used in situ without removing the aluminium housing. Use with 24mm spanner only. Supplied in carry-case."
Price: 140.02 |
| "Sealey VS2069 | FSI Injector Remover/Installer & Service Kit - VAG" |
| "Injector remover/installer and service kit for petrol injectors found in VAG vehicles."
Price: 113.23 |
| "Sealey S0840 | Reversible Ratchet Combination Spanner Set 12pc Metric" |
| "Chrome Vanadium steel reversible ratchet combination spanner set. 72-Tooth, ratchet ring and gear set requiring only 5º rotation to pick up the next tooth, ideal for applications where space is limited. Supplied in storage rack."
Price: 132.92 |
| "Sealey VSE4778 | Bush Removal Tool - Ford Mondeo" |
| "Remove/install rear sub-frame bushes in Mondeo. Can be used in situ - no need to remove sub-frame from vehicle. Supplied in carry-case."
Price: 124.06 |
| "Sealey CV090 | Impact Socket 90mm 1""Sq Drive Commercial" |
| "Chrome Molybdenum, drop-forged, 6-point impact socket. Hardened and tempered for strength and with phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 142.78 |
| "Sealey SA17/S | Air Polisher Ø180mm 2500rpm" |
| "Polished and well balanced aluminium body with two side handle mounting positions. Precision made bevel gears give quiet and smooth operation. Trigger operated throttle control. Suitable for polishing and compounding. Supplied with Ø180mm self-adhesive backing pad."
Price: 153.59 |
| "Sealey SX404 | Alternator Freewheel Pulley Removal Set 35pc" |
| "Comprehensive set for easy removal of freewheel alternator pulley, either on or off the vehicle. Allows alternator shaft to be held while pulley retainer is removed."
Price: 150.66 |
| "Sealey SA813 | Retractable Air Hose Reel 10mtr 8mm ID - PU Hose" |
| "Heavy-duty polypropylene casing. Double braided polyurethane hose fitted with 1/4""BSP female inlets and 1/4""BSPT male outlets. Features auto layering mechanism which distributes air hose evenly back into the reel housing preventing it from jamming. Supplied with mounting bracket and fixing kit for attachment onto walls or ceilings."
Price: 144.13 |
| "Sealey VSE5586 | Front Lower Control Arm Bush Tool - BMW 3 Series" |
| "Suitable for the removal/installation of the front lower control arm bush on BMW 3 Series. Can be used in-situ without removing the arm from the vehicle. When installing the new bush, they must be held compressed while being pressed into the suspension control arm which this tool is designed for. Supplied in carry-case."
Price: 128.01 |
| "Sealey VS70095 | Transmission Oil Filling System 3ltr" |
| "Pump operated oil dispensing unit with a three litre capacity. Supplied with five multipurpose and three vehicle specific automatic transmission fluid adaptors. Features a fluid control and depressurising valve."
Price: 141.79 |
| "Sealey VSE4779 | Rear Axle Bush Tool - Ford Fiesta IV, Ka" |
| "Remove/install Fiesta IV rear axle mounting bushes. Can be used in situ - no need to remove trailing link assembly from vehicle. Supplied in carry-case."
Price: 146.22 |
| "Sealey AC18BP | Screwed Adaptor Female 1/4""BSP Pack of 100" |
| "Free airflow rate at 100psi(7bar): 35-43cfm(991-1218ltr/min). Manufactured in the UK. Ideal for workshop/engineering use with all types of wrenches, sanders and grinders. Adaptors will fit Vertex slim type coupling bodies."
Price: 134.89 |
| "Sealey HVLP-79/P3 | Pressure Pot 2ltr for HVLP-79/P" |
| "2ltr Pressure pot suitable for use with Model No. HVLP-79/P pressure pot spray gun."
Price: 156.16 |
| "Sealey VSE5092 Petrol Engine Setting/Locking Kit - Citroen/Peugeot 1.0 Vti" |
| "Contains the essential tools required for timing belt replacement on PSA 1.0 and 1.2 VTi Pure-Tech three cylinder belt drive petrol engines. Supplied in carry-case."
Price: 111.25 |
| "Sealey VSE5086 Diesel Engine Setting/Locking Kit - Chain Drive" |
| "Suitable for setting and locking 2.0 & 2.3dCi/CDTi chain drive engines fitted in Renault, Nissan and Vauxhall/Opel models with most M9R/M9T engine codes. Includes a crankshaft holding tool. Supplied in storage case."
Price: 142.78 |
| "Sealey RE97XS30 | Push Ram - Short 30tonne" |
| "Extremely short collapsed height makes this ram suitable for use where there is almost no clearance at the lift point. Unique ram and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extension and jamming. Chromed ram with polyurethane seals and wipers provide longer service life. Ram features high flow quick connecting coupler with dust cap. Use in conjunction with Hydraulic Pump and Hose (not included) from RE83 and RE97 Series Body Repair Kits."
Price: 145.32 |
| "Sealey HVLP-79/P1 | Spray Gun 1.7mm Set-Up for HVLP-79/P" |
| "Spray gun head suitable for use with Model No. HVLP-79/P pressure pot spray gun."
Price: 156.16 |
| "Sealey VS0202 | Workshop Vacuum Brake & Clutch Bleeder 5ltr" |
| "One-man operation using standard workshop air supply (90-120psi). Professional, quick, clean and efficient. Large capacity for the busy workshop. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system. Vacuum gauge for accurate vacuum application. Separate cap for easy emptying. Long lasting silicon rubber hose for ultra flexibility. Includes reservoir top-up kit and adaptors."
Price: 142.78 |
| "Sealey PP7 | Auto Probe with LCD Display 12-42V" |
| "A range of functions allow automotive electricians and mechanics the ability to effectively diagnose short circuits and bad earths. The 4.6mtr lead connects to a 12V battery supply and reaches to all areas of the vehicle. Fly lead allows continuity and polarity testing with a high-contrast LCD display with 9mm high (0V to 42V) read-out. Activate components in situ or prior to installation. Features audible and positive/negative voltage indicator plus two integral work lights. Kit includes three probe extension leads, two wire piercing probes, two lead adaptors and a crocodile clip. Supplied in a carry-case."
Price: 157.04 |
| "Sealey VSE5951 Diesel Engine Setting/Locking Kit - Dodge, Ford, Mitsubishi" |
| "Comprehensive kit covering engine timing and belt replacement on VAG 1.2-2.0D Pumpe Duse and 1.2, 1.6, 2.0D Common Rail diesels. Also covers these engines fitted in Ford, Dodge and Mitsubishi models. Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins and tensioner adjustment tools. Supplied in storage case."
Price: 141.79 |
| "Sealey VSE2513 Petrol Engine Setting/Locking Kit Belt Drive" |
| "Contains inlet and exhaust camshaft setting plates and a timing belt tensioner adjuster. TDC Position on these twin cam engines is established using Model No. VSE2515 TDC Positioning Tool and Model No. AK9634M Dial Gauge."
Price: 140.32 |
| "Sealey DBG507 | Dial Bore Gauge 10-18mm" |
| "Precision mechanism with Ø50mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 5mm with an accuracy of 0.01mm. Probe body, dial indicator, anvil and spacer rings are also included. Supplied in wooden storage case."
Price: 128.01 |
| "Sealey GSA02 | Air Impact Wrench 1/2""Sq Drive Twin Hammer" |
| "Generation Series twin hammer impact wrench. Suitable for garage, tyre shop and workshop applications. Handle exhaust reduces noise output and contoured soft grip handle gives added comfort and control. Features three-position adjustable air/torque control and reversible action."
Price: 158.13 |
| "Sealey VSE5660 Diesel/Petrol Engine Flywheel Holding Tool Chain Drive" |
| "Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 & Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work."
Price: 137.85 |
| "Sealey SA616 | Air Ratchet Wrench Reactionless 1/2""Sq Drive" |
| "Manufactured with a composite covered handle to help reduce chill and vibration. Patented reactionless drive mechanism, which stops the handle snapping away when tightening bolts preventing wrist injuries. Enclosed ratchet head gives added strength and allows for high torque reaching up to 75lb.ft (102Nm). Free speed of 450rpm, faster than traditional ratchets. Drive shaft is housed by a heat treated alloy steel bushing to reduce wear and extend the life. Built-in torque regulator adjustment. Push down twist reverse switch. Suitable for the professional workshop."
Price: 158.32 |
