| "1x Fuel Hose, Stainless Steel Over Braid 10mm ID (SSR003) (SSR003)" |
| "Fuel Hose, Stainless Steel Over Braid 10mm ID (SSR003) Hose Lining:- Acrylonitrile-Butadiene Rubber Overbraid:- Cotton yarn (SSR- Stainless Steel Overbraid) Construction Design:- DIN73379B Fuels:- Leaded/Lead Substitute/Unleaded Up To E10 (Low Pressure) Diesel/Water/Air Temp range:- -30 to +70 deg C Recommendations:- Low Fuel Pressure Applications (up to 20psi) Fuel Hose Max Bust Pressure:- 362 Psi (25 bar) Test Standards:- SAE S30R6 / SAE J30R7 Safety Factor:- 30% Bend Radius 25mm"
Price: 9.56 |
| "1x Fuel Hose, Stainless Steel Over Braid 8mm ID (SSR002) (SSR002)" |
| "Fuel Hose, Stainless Steel Over Braid 8mm ID (SSR002) Hose Lining:- Acrylonitrile-Butadiene Rubber Overbraid:- Cotton yarn (SSR- Stainless Steel Overbraid) Construction Design:- DIN73379B Fuels:- Leaded/Lead Substitute/Unleaded Up To E10 (Low Pressure) Diesel/Water/Air Temp range:- -30 to +70 deg C Recommendations:- Low Fuel Pressure Applications (up to 20psi) Fuel Hose Max Bust Pressure:- 362 Psi (25 bar) Test Standards:- SAE S30R6 / SAE J30R7 Safety Factor:- 30% Bend Radius 25mm"
Price: 8.31 |
| "1x Fuel Hose, Stainless Steel Over Braid 6mm ID (SSR001) (SSR001)" |
| "Fuel Hose, Stainless Steel Over Braid 6mm ID (SSR001)"
Price: 8.17 |
| "1x 479012B PUMP BOT. COVER MAGNET (FPA910)" |
| "479012B PUMP BOT. COVER MAGNET"
Price: 4.39 |
| "1x 479136 PUMP BOTTOM COVER SEAL (FPA909)" |
| "479136 PUMP BOTTOM COVER SEAL"
Price: 3.43 |
| "1x RED 'T' PULL CABLE 12ft (3.7 Mtrs) (TPK002)" |
| "RED 'T' PULL CABLE 12ft (3.7 Mtrs) With nylon inner liner to prevent chafing"
Price: 8.34 |
| "1x RED 'T' PULL CABLE 6ft (1.8 Mtrs) (TPK001)" |
| "RED 'T' PULL CABLE 6ft (1.8 Mtrs) With nylon inner liner to prevent chafing."
Price: 8.41 |
| "1x MSA003 RED KEY (BMS003) (MSA003)" |
| "MSA003 RED KEY (BMS003)"
Price: 1.52 |
| "1x MSA004 DIODE (BMS003) (MSA004)" |
| "MSA004 DIODE (BMS003)"
Price: 1.65 |
| "1x MSA001 STICKER - BATT. EARTH (MSA001)" |
| "MSA001 STICKER - BATT. EARTH"
Price: 1.72 |
| "1x MSA002 RED KEY (BMS001/002) (MSA002)" |
| "MSA002 RED KEY (BMS001/002)"
Price: 1.52 |
| "1x Thackery Washer (CSA004)" |
| "Thackery Washer Our thackery washers are M8."
Price: 1.03 |
| "B12-00733 - 20 mm MSBZP Half Saddle Clamps (15.5-19)" |
| "B12-00733 Misc Full Saddle Clamps Size (mm) 20"
Price: 1.09 |
| "B12-00789 - Half Saddle Clamp - 26 mm MSBZP Half Saddle Clamps" |
| "B12-00789 Misc Full Saddle Clamps Size (mm) 26"
Price: 1.79 |
| "B12-00788 - Half Saddle Clamp - 28 mm MSBZP Half Saddle Clamps" |
| "B12-00788 Misc Full Saddle Clamps Size (mm) 28"
Price: 1.9 |
| "B12-00790 - Half Saddle Clamp - 22 mm MSBZP Half Saddle Clamps" |
| "B12-00790 Misc Full Saddle Clamps Size (mm) 22"
Price: 1.58 |
| "B12-00783 - Half Saddle Clamp - 32 mm MSBZP Half Saddle Clamps" |
| "B12-00783 Misc Full Saddle Clamps Size (mm) 32"
Price: 2.09 |
| "B12-00791 - Full Saddle Clamp - 28 mm MSBZP Full Saddle Clamps" |
| "B12-00791 Misc Full Saddle Clamps Size (mm) 28"
Price: 2.1 |
| "B12-00795 - Full Saddle Clamp - 32 mm MSBZP Full Saddle Clamps" |
| "B12-00795 Misc Full Saddle Clamps Size (mm) 32"
Price: 2.19 |
| "GS10137 - LIGHTING & IGNITION SWITCHES Replica Lucas PLC5 ignition/switch." |
| "Replica Lucas PLC5 ignition/switch."
Price: 75.91 |
| "B10-00565 - 1/2 BSPT Male Thread x1/2 Ho se Tail - Male Hose Tail - N" |
| "BSPT Male Thread 1/2 Hose I/D 1/2"
Price: 1.54 |
| "B10-00231 - 1/2 BSPT Male Thread x1/2 Ho se I/D - Male Branch Tee Hose" |
| "BSPT Male Thread 1/2 Hose I/D 1/2"
Price: 1.63 |
| "Auto Bulbs - Osram - H7 Night Breaker Plus Headlight 64210NBP" |
| "64210NBP Osram Bulbs Auto Bulbs Osram H7 Night Breaker Plus Headlight"
Price: 19.99 |
| "Auto Bulbs - Osram - H4 Night Breaker Plus Headlight 64193NBP" |
| "64193NBP Osram Bulbs"
Price: 17.1 |
| "Auto Bulbs - Osram - H1 Night Breaker Plus Headlight 64150NBP" |
| "64150NBP Osram Bulbs"
Price: 17.1 |
| "1x PowerTec HT Ignition Lead Sets Universal M1" |
| "M1 Powertec HT Lead, Fittings & Sets Direct replacement Sets (PT---) Sport Sets (SPT---) (Coming Soon) Copper Core Sets (PT---C) Semi-tailored OE Sets (PT---C) Multifit Sets (M---) The PowerTec Range Direct Replacement Sets (PT---) A range of over 900 sets manufactured to meet or out perform those fitted as original equipment by using only the highest quality 5, 7, and 8 mm Silicone cable and OE style components. The cable has a Kevlar core, providing maximum spark plug output with minimum electrical interference. The PowerTec Range Copper Core Sets (PT---C) OE type range available in tinned bare copper conductor allowing maximum conductivity to the spark plug. To ensure that no electrical interference is experienced, such as RFI/EMI, Powertec use suppressed spark plug and distributor connectors. The PowerTec Range Semi-tailored Sets (PT--ST) A range of sets designed for use exclusively with multi-valve engines, offering an economical price alternative to the PT exact OE replacement set. Made using 7mm Silicone Kevlar core cable and high quality semi-tailored multi-valve boot on the plug end, otherwise the set is identical to the OE-type sets. The PowerTec Range Multifit Sets (M---) 17 sets in the range covering all popular applications, including 5, 6 and 8 cylinder engine models. Manufactured using 8mm EPDM single extrusion Kevlar core cable, with superior spark boots and terminals. Thanks to improved technology, years of experience and reliable suppliers we are able to manufacture high quality ignition lead sets at competitive prices. Powertec offers the widest range of ignition lead sets covering over 1000 OE applications."
Price: 12.31 |
| "1x PowerTec HT Ignition Lead Sets Universal M7" |
| "M7 Powertec HT Lead, Fittings & Sets Direct replacement Sets (PT---) Sport Sets (SPT---) (Coming Soon) Copper Core Sets (PT---C) Semi-tailored OE Sets (PT---C) Multifit Sets (M---) The PowerTec Range Direct Replacement Sets (PT---) A range of over 900 sets manufactured to meet or out perform those fitted as original equipment by using only the highest quality 5, 7, and 8 mm Silicone cable and OE style components. The cable has a Kevlar core, providing maximum spark plug output with minimum electrical interference. The PowerTec Range Copper Core Sets (PT---C) OE type range available in tinned bare copper conductor allowing maximum conductivity to the spark plug. To ensure that no electrical interference is experienced, such as RFI/EMI, Powertec use suppressed spark plug and distributor connectors. The PowerTec Range Semi-tailored Sets (PT--ST) A range of sets designed for use exclusively with multi-valve engines, offering an economical price alternative to the PT exact OE replacement set. Made using 7mm Silicone Kevlar core cable and high quality semi-tailored multi-valve boot on the plug end, otherwise the set is identical to the OE-type sets. The PowerTec Range Multifit Sets (M---) 17 sets in the range covering all popular applications, including 5, 6 and 8 cylinder engine models. Manufactured using 8mm EPDM single extrusion Kevlar core cable, with superior spark boots and terminals. Thanks to improved technology, years of experience and reliable suppliers we are able to manufacture high quality ignition lead sets at competitive prices. Powertec offers the widest range of ignition lead sets covering over 1000 OE applications."
Price: 16 |
| "1x PowerTec HT Ignition Lead Sets Universal M8" |
| "M8 Powertec HT Lead, Fittings & Sets Direct replacement Sets (PT---) Sport Sets (SPT---) (Coming Soon) Copper Core Sets (PT---C) Semi-tailored OE Sets (PT---C) Multifit Sets (M---) The PowerTec Range Direct Replacement Sets (PT---) A range of over 900 sets manufactured to meet or out perform those fitted as original equipment by using only the highest quality 5, 7, and 8 mm Silicone cable and OE style components. The cable has a Kevlar core, providing maximum spark plug output with minimum electrical interference. The PowerTec Range Copper Core Sets (PT---C) OE type range available in tinned bare copper conductor allowing maximum conductivity to the spark plug. To ensure that no electrical interference is experienced, such as RFI/EMI, Powertec use suppressed spark plug and distributor connectors. The PowerTec Range Semi-tailored Sets (PT--ST) A range of sets designed for use exclusively with multi-valve engines, offering an economical price alternative to the PT exact OE replacement set. Made using 7mm Silicone Kevlar core cable and high quality semi-tailored multi-valve boot on the plug end, otherwise the set is identical to the OE-type sets. The PowerTec Range Multifit Sets (M---) 17 sets in the range covering all popular applications, including 5, 6 and 8 cylinder engine models. Manufactured using 8mm EPDM single extrusion Kevlar core cable, with superior spark boots and terminals. Thanks to improved technology, years of experience and reliable suppliers we are able to manufacture high quality ignition lead sets at competitive prices. Powertec offers the widest range of ignition lead sets covering over 1000 OE applications."
Price: 12.1 |
| "1x PowerTec HT Ignition Lead Sets Universal M9" |
| "M9 Powertec HT Lead, Fittings & Sets Direct replacement Sets (PT---) Sport Sets (SPT---) (Coming Soon) Copper Core Sets (PT---C) Semi-tailored OE Sets (PT---C) Multifit Sets (M---) The PowerTec Range Direct Replacement Sets (PT---) A range of over 900 sets manufactured to meet or out perform those fitted as original equipment by using only the highest quality 5, 7, and 8 mm Silicone cable and OE style components. The cable has a Kevlar core, providing maximum spark plug output with minimum electrical interference. The PowerTec Range Copper Core Sets (PT---C) OE type range available in tinned bare copper conductor allowing maximum conductivity to the spark plug. To ensure that no electrical interference is experienced, such as RFI/EMI, Powertec use suppressed spark plug and distributor connectors. The PowerTec Range Semi-tailored Sets (PT--ST) A range of sets designed for use exclusively with multi-valve engines, offering an economical price alternative to the PT exact OE replacement set. Made using 7mm Silicone Kevlar core cable and high quality semi-tailored multi-valve boot on the plug end, otherwise the set is identical to the OE-type sets. The PowerTec Range Multifit Sets (M---) 17 sets in the range covering all popular applications, including 5, 6 and 8 cylinder engine models. Manufactured using 8mm EPDM single extrusion Kevlar core cable, with superior spark boots and terminals. Thanks to improved technology, years of experience and reliable suppliers we are able to manufacture high quality ignition lead sets at competitive prices. Powertec offers the widest range of ignition lead sets covering over 1000 OE applications."
Price: 13.35 |
