| "Genuine SEALEY MW160A | Inverter Welder 160Amp 230V" |
| "Compact and lightweight unit weighing 5.5kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2mtr 16mm² cable with electrode holder and a 2mtr 13mm² earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S. Supplied in a carry-case."
Price: 326.27 |
| "Genuine SEALEY NLN12 | Nylon Lock Nut M12 Zinc DIN 982 Pack of 25" |
| "Zinc plated nylon lock nuts. Supplied in resealable bag. DIN 982. Pack of 25."
Price: 2.99 |
| "Genuine SEALEY MTG24 | Masking Tape General Purpose 24mm x 50mtr 60°C" |
| "Masking tape. Suitable for use up to 60°C."
Price: 1.61 |
| "Genuine SEALEY MW200A | Inverter Welder 200Amp 230V" |
| "Compact and lightweight unit weighing 6kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø5mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2mtr 25mm² cable with electrode holder and 2mtr 25mm² earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S. Supplied in a carry-case."
Price: 435.05 |
| "Sealey MVMP01 MVMP Gravity Feed Spray Gun 1.3mm Set-Up - Finishing Coat" |
| "Gravity feed spray gun designed for applying clear finishing coats. Air cap engineered to provide 26psi of mist pressure for fast application and extended working distance. Greater efficiency than HVLP and less material wastage than conventional spray guns. MVMP Technology and precision engineering delivers consistent and unrivalled results. Suitable for use with water based paints. Features air and lacquer flow controls for fine adjustment of spray pattern."
Price: 104.35 |
| "Genuine SEALEY MV105 | Borescope Probe 5.5mm for MS905 & MS908" |
| "Increases the functionality of your diagnostic tool, into a fully functional borescope. Simply plug in the USB cable to display image on screen."
Price: 151.7 |
| "Sealey MTC1 Motorcycle Tank Cover" |
| "Water/oil resistant full tank cover ideal for protection while working on motorcycle. Double layer cover for extra protection. Inner layer is made from soft non-slip material. Features anti-scratch material to protect tank paintwork. Model No. MTC1"
Price: 20.8 |
| "Genuine SEALEY NCO/5L | Neat Cutting Oil 5ltr" |
| "Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel."
Price: 53.59 |
| "Genuine SEALEY NBG150/GWF | Grinding Stone Ø150 x 16mm 13mm Bore A60P Fine" |
| "Aluminous oxide stone suitable for all general purpose applications. All our 150mm grinding stones fit 13mm axles and are supplied with 32-13mm reduction bushes where applicable."
Price: 10.17 |
| "Genuine SEALEY NBG150/GWC | Grinding Stone Ø150 x 16mm 13mm Bore A36Q Coarse" |
| "Aluminous oxide stone suitable for all general purpose applications. All our 150mm grinding stones fit 13mm axles and are supplied with 32-13mm reduction bushes where applicable."
Price: 10.45 |
| "Genuine SEALEY NFH10 | Hammer Nylon Faced 1lb" |
| "Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness. Made in UK."
Price: 28.37 |
| "Genuine SEALEY NFH175 | Hammer Nylon Faced 1.75lb" |
| "Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness. Made in UK."
Price: 35.95 |
| "Genuine SEALEY NFH15 | Hammer Nylon Faced 1.25lb" |
| "Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness. Made in UK."
Price: 31.69 |
| "Genuine SEALEY OCSE1720 | O-Clip Single Ear Ø17.8-21mm Pack of 25" |
| "Single ear O-clip. Manufactured to DIN 1.4301. SS301A Grade stainless steel. Suitable for use on hydraulic hose."
Price: 7.63 |
| "Genuine SEALEY NLN16 | Nylon Lock Nut M16 Zinc DIN 982 Pack of 25" |
| "Zinc plated nylon lock nuts. Supplied in resealable bag. DIN 982. Pack of 25."
Price: 6.17 |
| "Genuine SEALEY OCDE79 | O-Clip Double Ear Ø7-9mm Pack of 25" |
| "Double ear O-clip. Manufactured to DIN 1.0338. Zinc plated. Suitable for use on hydraulic hose."
Price: 3.37 |
| "Genuine SEALEY OFC1 | Oil Filter Crushing Unit" |
| "Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimises the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow two-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5) press rams. Optional adaptors enable use with Ø50mm and Ø60mm rams."
Price: 137.3 |
| "Genuine SEALEY OCDE2023 | O-Clip Double Ear Ø20-23mm Pack of 25" |
| "Double ear O-clip. Manufactured to DIN 1.0338. Zinc plated. Suitable for use on hydraulic hose."
Price: 6.78 |
| "Genuine SEALEY NLN8 | Nylon Lock Nut M8 Zinc DIN 982 Pack of 100" |
| "Zinc plated nylon lock nuts. Supplied in resealable bag. DIN 982. Pack of 100."
Price: 3.62 |
| "Genuine SEALEY OCSE810 | O-Clip Single Ear Ø8.5-10mm Pack of 25" |
| "Single ear O-clip. Manufactured to DIN 1.4301. SS301A Grade stainless steel. Suitable for use on hydraulic hose."
Price: 6.34 |
| "Genuine SEALEY OCSE78 | O-Clip Single Ear Ø7-8.5mm Pack of 25" |
| "Single ear O-clip. Manufactured to DIN 1.4301. SS301A Grade stainless steel. Suitable for use on hydraulic hose."
Price: 6.34 |
| "Genuine SEALEY OCDE911 | O-Clip Double Ear Ø9-11mm Pack of 25" |
| "Double ear O-clip. Manufactured to DIN 1.0338. Zinc plated. Suitable for use on hydraulic hose."
Price: 3.45 |
| "Genuine SEALEY OCSE911 | O-Clip Single Ear Ø9.8-11.8mm Pack of 25" |
| "Single ear O-clip. Manufactured to DIN 1.4301. SS301A Grade stainless steel. Suitable for use on hydraulic hose."
Price: 6.78 |
| "Genuine SEALEY OCDE1720 | O-Clip Double Ear Ø17-20mm Pack of 25" |
| "Double ear O-clip. Manufactured to DIN 1.0338. Zinc plated. Suitable for use on hydraulic hose."
Price: 4.64 |
| "Genuine SEALEY IS152D | Impact Socket 52mm Deep 1Sq Drive" |
| "Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 49.21 |
| "Genuine SEALEY IS150D | Impact Socket 50mm Deep 1Sq Drive" |
| "Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 48.26 |
| "Genuine SEALEY IS136D | Impact Socket 36mm Deep 1Sq Drive" |
| "Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 30.74 |
| "Genuine SEALEY IS150 | Impact Socket 50mm 1Sq Drive" |
| "Chrome Molybdenum, drop-forged, WallDrive® impact socket. Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 33.58 |
| "Genuine SEALEY IS141D | Impact Socket 41mm Deep 1Sq Drive" |
| "Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches."
Price: 33.58 |
