| "Sealey MS007 Carburettor Jet Wrench Set 6-8mm" |
| "Double end wrench suitable for use with 6 & 8mm round jets. Single end wrench for use on 6mm hex jets. Model No. MS007"
Price: 11.04 |
| "Sealey MS013 Pilot Screw Adjusting Tool" |
| "460mm Tool gives deep access particularly suited to adjustment of motorcycle carburettors. 110° Angled head gives improved access to hard-to-reach areas. One turn of handle equals one turn of slotted blade. Blade tip height is adjustable allowing it to be set in place during operation. Model No. MS013"
Price: 26.06 |
| "Sealey MS026 Motorcycle Clutch Spring Tool 125mm" |
| "Specialized tool designed to remove clutch springs from motorcycles. Pushes through centre to remove springs quickly and safely. Manufactured from drop-forged steel. Suitable for use on motorcycles with 125mm pulleys. Model No. MS026"
Price: 25.95 |
| "Sealey MS020 Combination Axle Spanner 22 & 32mm" |
| "Combination racer axle spanner suitable for use on Honda, Kawasaki, Suzuki and Yamaha motorcycles. Model No. MS020"
Price: 13.46 |
| "Sealey MS008 Motorcycle Spindle Tool 17, 19, 22 & 24mm" |
| "Prevents spindle from spinning when tightening or loosening wheel nut. Use appropriate socket on free end of tool to hold spindle. Four sizes to fit Honda, Kawasaki, Suzuki, Yamaha, Buell and some BMW motorcycles. Model No. MS008"
Price: 16.99 |
| "Sealey MS014 Motorcycle Brake Bleeder" |
| "One man bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small non-return valve and two connector hoses that attach to the scooter or motorcycle bleed nipple. As the brake/clutch are bled the valve prevents the used fluid and air being drawn back into the system. Model No. MS014"
Price: 11.8 |
| "Sealey MS016 Fork Seal Driver" |
| "Designed for easy installation of fork seals. Limits potential damage caused by other installation methods to the forks. Minimum/Maximum Fork Ø: 35-55mm. Model No. MS016"
Price: 68.39 |
| "Sealey MS018 Motorcycle Fork Seal Driver Kit 9pc" |
| "Professional kit to cover most diameters of forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. Limits potential damage to the forks caused by using other installation methods. Model No. MS018"
Price: 399.32 |
| "Sealey MS022 Fork Cap Spanner 46 & 50mm" |
| "Combination fork cap wrench suitable for use on Showa and twin camber forks. Model No. MS022"
Price: 22.67 |
| "Sealey MS004 Oil Filter Claw Wrench 43-102mm" |
| "Chrome polished carbon steel construction with 3/8 & 1/2Sq drive. Also suitable for use with a 21mm spanner. Claws grip filter tighter as more torque is applied. Fits a range of popular motorcycle can filters ranging from 43 to 102mm. Model No. MS004"
Price: 17.14 |
| "Sealey MS006 Motorcycle Piston Ring Compressing Tool Kit" |
| "Used to prevent piston ring damage while inserting pistons into the cylinder head. Easily removed when cylinder is in place. Tool supplied with four ring clamps ranging from Ø40-85mm. Will fit most engine sizes. Model No. MS006"
Price: 28.35 |
| "Sealey MS005 Motorcycle Chain Alignment Tool" |
| "Accurate tool for correct alignment of the chain and sprocket. Helps prevent wear to the chain and sprockets. Maximum Chain Size: 28mm. Model No. MS005"
Price: 19.85 |
| "Sealey MS015 Disc Brake Opening Tool" |
| "Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. Features moulded rubber handle enabling extra grip. Model No. MS015"
Price: 24.43 |
| "Sealey MS025 Heavy-Duty Motorcycle Chain Splitter & Riveting Tool Set" |
| "Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. Set is also ideal for use on horticultural and agricultural machinery. Includes tools designed for riveting and plate holder for connecting links accurately. Model No. MS025"
Price: 156.82 |
| "Sealey MS034 Motorcycle Flywheel Puller" |
| "Designed with 6 different sized threaded adaptors for flywheel rings on motorcycles. Models with tapered lock type rings cannot be removed without the use of this specialized tool. Suitable for most types of motorcycle. Model No. MS034"
Price: 27.56 |
| "Sealey MS040 Motorcycle Steering Stem Bearing Race Removal Tool" |
| "Prevents damage associated with removal of stem bearing. Universal tool works on most steering stem bearings ranging from Ø30-68mm. Can be used in conjunction with Model No. VS1831 Steering Tube Bearing Installer. Model No. MS040"
Price: 37.84 |
| "Sealey MS038 Motorcycle Twin-Clamp Cable Oiler" |
| "Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables. Model No. MS038"
Price: 8.9 |
| "Sealey MS037 Spoke Wrench" |
| "Specially designed spoke wrench with 6 different sizes. Suitable for adjusting spoke tension and removing/installing new spokes. Model No. MS037"
Price: 11.89 |
| "Sealey MS033 Motorcycle Fork Oil Level Gauge with Top-Up Syringe" |
| "Specialized tool designed for checking and adjusting oil levels on all conventional and single chamber cartridge motorcycle forks. Supplied with adjustable ring and oil pipe to measure oil levels from 0-290mm in 5mm increments. Features top-up syringe with 70ml capacity. Can also be used on bicycles equipped with front suspension. Model No. MS033"
Price: 40.06 |
| "Sealey MS028 Clutch Locking Nut Removal Tool 20 & 24mm" |
| "Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on Honda motorcycles with 20 or 24mm lock nuts. Model No. MS028"
Price: 28.07 |
| "Sealey MS036 Motorcycle Locking Pulley Holder" |
| "Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool at required set size with quick release when finished. Model No. MS036"
Price: 27.03 |
| "Sealey MS039 Universal Motorcycle Pulley Holding Tool - 5.7 & 9.3mm Pins" |
| "Suitable for holding flywheels and pulleys during removal and installation. Length: 330mm. Two sizes of pins; 5.7mm one side and 9.3mm the other. Centre-to-Centre: 24-234mm. Features a locking adjustment screw to keep tool at required set size. PVC Dipped handles for extra grip and comfort when in use. Model No. MS039"
Price: 21.56 |
| "Sealey MS027 Flywheel Puller M24 x P1.5R" |
| "Manufactured from heat treated steel. Designed to remove lock nuts from motorcycle flywheels quickly and safely. Suitable for a variety of motorcycles. Model No. MS027"
Price: 16.61 |
| "Sealey MS029 Motorcycle Portable Fuel Tank 1ltr" |
| "Useful 'must have' item, when needing to remove fuel tank to perform maintenance on your motorcycle. Eliminates need to balance fuel tank in an awkward position. Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. Features 1ltr tank, 950mm hose, two hose clamps and on/off tap. Model No. MS029"
Price: 34.53 |
| "Sealey MS065 Vehicle Storage Shelter Small" |
| "Made with 600D polyester Oxford waterproof material. Easy to assemble and use. When shut can be locked with a padlock (not included). Freestanding or can be bolted to a hard surface (bolts not included). Supplied with soft ground anchors. Will fit most mobility scooters, standard motorcycles and cruisers. Size (L x W x H): 2700 x 1050 x 1550mm. Model No. MS065"
Price: 204.37 |
| "Sealey MS048 Motorcycle Shock Bushing Driver Set 4pc" |
| "Enables shock bushes to be installed straight and fast. Suits most bushes/shocks. Supplied in holder. Sizes: 12.5, 14, 16, 18mm. Model No. MS048"
Price: 14.45 |
| "Sealey MS056 Motorcycle Fork Seal Driver 43mm" |
| "Professional seal driver for 43mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. Limits potential damage to the forks caused by using other methods. Model No. MS056"
Price: 50.12 |
| "Sealey MS051 Motorcycle Stud Installation Tool" |
| "Aids fast installation of threaded studs without risk of damage to thread. Ideal for engine and exhaust studs. Operate using a 19mm spanner and a 5.5mm hex key. Thread Sizes: M6 x 1, M8 x 1.25, M10 x 1.25mm. Model No. MS051"
Price: 12.75 |
| "Sealey MS058 Motorcycle Fork Seal Driver 46-47mm" |
| "Professional seal driver for 46-47mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. Limits potential damage to the forks caused by using other methods. Model No. MS058"
Price: 50.12 |
