| "Bosch Bosch UniversalGardenTidy Blower Vac (230V)" |
| "The UniversalGardenTidy is a 2 in 1 blower and vac, collecting and blowing leaves quietly and simply. It has variable speed control to ensure speed can be easily controlled in both modes, as well as it being 80% quieter than its predecessor. The vac can be changed to a blower with the release of one screw, making changing between the modes easier than ever. The new bag design keeps users cleaner and drier for longer and the new volute allows for easy unclogging after use.Product comes complete with: padded shoulder strap, power supply unit, 45L collection bag, vacuum tube and blower nozzle."
Price: 101.99 |
| "Clarke Clarke CWL325V 13"" Wood Lathe with Electronic Variable Speed" |
| "Ideal for woodworking enthusiasts/hobbyists with small workshops or limited budgets. Best suited to facing, turning, drilling, boring and threading. High quality cast iron bed provides stability and reduces vibration. Quick release levers enable the tailstock and tool rest to be positioned, locked and released with ease. Speed can be varied instantly by turning simple control instead of laborious manual belt change. Supplied with 110mm and 170mm tool rest and face plate."
Price: 191.98 |
| "Clarke Clarke 4.5"" Masonry Cutting Disc" |
| "115mm (4½") angle grinder disc purposely made to cut masonry, brick & stone. Depressed centre prevents the retaining nut from fouling the work piece so flat surface cutting can be accomplished. 22mm diameter bore means it will fit to most 4½" angle grinders with a standard M14 drive shaft."
Price: 0.83 |
| "Clarke Clarke SCR180 Diamond Blade 180mm" |
| "A sintered diamond cutting wheel suitable for wet cutting tiles."
Price: 9.59 |
| "Clarke Cutting Fluid 5 Litre" |
| "Ideal for use with lathes, metal cutting bandsaws & drill presses. Makes drilling or cutting much easier & greatly increases bit, blade or tool life."
Price: 28.79 |
| "Clarke Clarke 9"" Metal Cutting Disc" |
| "230mm (9"") diameter ferrous metal cutting disc with a 22mm diameter bore and flat centre. Fits most 9"" angle grinders with a standard M14 drive shaft."
Price: 2.15 |
| "Clarke Replacement Blade for CBS190" |
| "A general purpose woodcutting blade for the Clarke CBS190 bandsaw."
Price: 9.59 |
| "Clarke Clarke Contractor CON850 Reciprocating Saw" |
| "Ideal for DIY & trade use. Multipurpose saw for cutting wood, board and metal pipes etc. Features quick release, tool-less blade change."
Price: 65.99 |
| "Clarke 6pc Cutting Tool Set for CL300M" |
| "A six piece P30 grade drop forged steel cutting tools with tungsten carbide cutting tips. Includes Cranked Turning & Facing Tool, Rough Boring Tool, Inside Corner Tool, Recessing Tool, Cranked Facing Tool & Cranked Knife Tool.Tool body sizes are all 8 x 8mm"
Price: 22.79 |
| "Clarke Clarke 13 x 455mm Medium Grit Belts for CPF13 (5 Pack)" |
| "A pack of 5 medium grit sanding belts, manufactured for use with the Clarke CPF13 Electric Power File."
Price: 4.19 |
| "Clarke Sanding Belt for CS4-6 Medium 5 Pack" |
| "A pack of 5 medium sanding belts for the Clarke CS4-6 and any other machines which require a 100 x 914mm belt."
Price: 9.59 |
| "Clarke Clarke CPP3000B Drill Powered Pump" |
| "Compact lightweight electric drill powered pump, ideal for transferring light liquids such as fresh water, sea water, dilute organic solvents, insecticides & liquid fertilisers.*PLEASE NOTE - This product is not suitable for transferring flammable liquids."
Price: 11.98 |
| "Clarke Clarke 42pce Clamping Set for CMD300 Mill / Drill" |
| "A 42 piece clamping set secured to a slotted worktable prior to drilling or milling. For use with the CMD300 miller driller. "
Price: 95.98 |
| "Clarke 4"" Sanding Belt for CS4-6 Coarse 5 Pack" |
| "A pack of 5 coarse sanding belts for the Clarke CS4-6 and any other machines which require a 100 x 914mm belt."
Price: 9.59 |
| "Clarke Clarke CMD10 Micro Milling / Drilling Machine" |
| "A compact milling/drilling machine. This high precision milling and drilling machine is designed for the discerning DIY or hobby user. Its compact dimensions make it ideal for use in the smaller workshop. It is solidly constructed with a cast iron head, base and column and it is supplied with a 10mm chuck and there are a wide range of tools and accessories available for it, from Machine Mart too.Full list of milling & drilling machine accessories available here. "
Price: 478.80 |
| "Clarke Stand with suds tray" |
| "A popular accessory for use with the CL500M or CL430 metal lathes, the Clarke suds tray provides substantial support for the machine and contains the swarf and residual cutting fluid produced during milling work."
Price: 214.80 |
| "Clarke 5/8"" Mortise Chisel" |
| "For use with the Clarke CBM1B - Mortising Machine (and many other brands) to cut a 5/8"" square hole cleanly into wood by using this mortising chisel. May also be used in conjunction with a mortising attachment which may be fitted to most standard pillar drills. Manufactured from hardened steel for long life."
Price: 11.98 |
| "Clarke Clarke CDDFTP Double Diaphragm Fuel Transfer Pump" |
| "The Clarke CDDFTP Fuel Transfer Pump is a self-priming hand operated lever pump is ideal for use where compressed air/power is not available such as farms and construction sites.Not suitable for Corrosive liquids, e.g. solvents, acids, alkalis etc."
Price: 83.98 |
| "Clarke Clarke STP12 12V Submersible Transfer Pump" |
| "The Clarke STP12 Submersible Transfer Pump is ideal for re-fuelling, removing bilge water, refilling transmission and hydraulic fluid systems etc. where there is no or limited access to mains electricity. This transfer pump can also be used to pump diesel kerosene (paraffin) and clean water. Not suitable for use with petrol.Supplied with 3m outlet hose with a stainless steel nozzle and 4m (approx.) battery cable with crocodile clips."
Price: 39.59 |
| "Clarke Clarke CCRT266 Cordless Rotary Tool with 262pc Accessory Kit" |
| "Versatile tool kit for drilling, milling, engraving, polishing, cleaning, cutting & grinding. Ideal for DIY, hobby and model enthusiasts for intricate detailed work."
Price: 44.39 |
| "Clarke Clarke Replacement Blade For CBS12WB Band Saw" |
| "Replacement Blade For CBS12WB Band Saw."
Price: 8.39 |
| "Clarke Clarke Tiger 2600 Petrol Pressure Washer" |
| "Ideal for use in remote locations the Clarke Tiger 2600 Petrol Pressure Washer features a tough protective steel frame and detergent facility for extra cleaning power, whilst the wheel mounted design allows for easy movement.This Clarke Petrol Pressure Washer benefits from a high pressure hose and lance with adjustable nozzle for fan or pencil jet, whilst being able to draw from a water butt, or barrel."
Price: 346.80 |
| "Clarke Clarke CMA1B Mortising Attachment" |
| "A useful woodworking accessory for the general workshop which adapts a standard drill press for use as a mortiser. Able to cut various sized deep square recesses into wood for a variety of purposes."
Price: 56.39 |
| "Clarke Clarke CDP302B Bench Drill Press (230V)" |
| "Get precison and power with the Clarke CDP302B Bench Drill Press, powered by a 550W induction motor it has 16 speed settings and a 3-16mm chuck capacity and integral work light making it suitable for a wide variety of jobs including drilling different material types."
Price: 238.80 |
| "Clarke Clarke CDP352F Floor Standing Industrial Drill Press (230V)" |
| "Get precision and power with the Clarke CDP352F Bench Drill Press, powered by a 550W induction motor it has 16 speed settings and a 3-16mm chuck capacity making it suitable for a wide variety of jobs including drilling different material types."
Price: 274.80 |
| "Clarke Replacement Blade for Clarke Bandsaw CBS300 (8 TPI)" |
| "Replacement 8 TPI (teeth per inch) blade for Clarke CBS300 wood cutting bandsaw."
Price: 13.19 |
| "Clarke Tailstock Chuck" |
| "A popular accessory for the CL300M metal lathe, the tailstock chuck provides improved support for the workpiece at the tailstock end. Supplied complete with chuck key."
Price: 39.59 |
| "Clarke Clarke CDS3 Drill Stand With Vice" |
| "The CDS3 from Clarke is a practical and easy to use drill stand with a vice, which allows electric drills to be securely held for vertical drilling. It is suitable for use with hand held electric drills with collar diameters of 43mm or 38mm with supplied reducing bush.Note: Drill is not included"
Price: 27.59 |
| "Clarke Replacement Bandsaw Blade for CBS12WV 6tpi" |
| "A 6tpi replacement blade for the Clarke CBS12WV Band Saw"
Price: 10.79 |
| "Clarke Clarke CS6-9C Belt & Disc Sander" |
| "This floor-standing sander / linisher comes complete with a stand and is ideal for professionals and DIY enthusiasts users alike. Suitable for use in the larger workshop, it allows all manner of sanding tasks to be accomplished easily and quickly. In addition, a wide variety of sanding discs and belts are available to make this multi-purpose sander a must for anybody serious about woodworking."
Price: 310.80 |
