| "Draper Draper EBS17COM 17 Piece Combined HSS and Masonry Drill Bit Set" |
| "Draper's HSS and Masonry Drill Bit Set features 12 titanium nitride coated high speed steel straight shank drills and five tungsten steel masonry drills in a handy case for easy storage. "
Price: 8.99 |
| "Draper Draper SD4-30 Step Drill Bit 4-30mm" |
| "The Draper SD4-30 Step Drill Bit has been manufactured with 2mm increments perfect for drilling steel, brass, copper, aluminium, wood and plastics. This Drill Bit has a total length of 65.5mm and has been constructed from good quality high-speed steel, correctly hardened for a longer life. "
Price: 31.99 |
| "Draper Draper DCT6CV Expert 13 Piece Commercial Vehicle Diesel Engine Compression Test Kit" |
| "This kit allows the compression of commercial diesel engines to be tested by cranking. Large easy-to-read scale measuring 0-1000psi/0-70kg/cm² with 600mm of flexible hose and push on adaptor incorporating a Schrader one way valve."
Price: 145.99 |
| "Draper Draper Expert AP1500K 180mm Angle Polisher" |
| "The Draper Expert AP1500K 180mm Angle Polisher features a soft start, digital display and switch with lock-on facility. This Draper 44190 Polisher also benefits from a soft grip rear handle and spindle lock button. Hook and loop backing pad for easy bonnet change. Supplied with: carrying case, backing pad, wool bonnet, 3m (approx.) cable and approved plug."
Price: 127.99 |
| "Draper Draper DPP1 Drill Powered Pump" |
| "The Draper DPP1 Drill Powered Pump has been constructed from a Bakelite body with rubber turbine for improved durability, providing a pumping capacity of 1000L per hour. Supplied with two 13mm adaptors for 6.5mm diameter pipe."
Price: 7.98 |
| "Draper Draper PRC45/75 45mm-75mm Piston Ring Compressor" |
| "This ring compressor is constructed from spring steel with a steel adjusting key."
Price: 7.99 |
| "Draper Draper DTK-FORD Expert 7 Piece Ford Diesel Engine Injection Timing Kit" |
| "This kit is manufactured from mild steel and chemically blacked, supplied in a handy plastic case."
Price: 14.98 |
| "Draper Draper MBS210 900W Horizontal Metal Cutting Bandsaw" |
| "The Draper 38010 900W Horizontal Metal Cutting Bandsaw has been engineered specifically for daily use in fabrication workshops and garages, boasts a powerful 900W motor, which effortlessly cuts through ferrous and non-ferrous metals. Bearing blade guides deliver extra stability and accuracy for the blade. This Draper bandsaw is fitted with an electronic control system, hydraulic lifting arm and vice providing all the features required for a professional engineering or fabrication workshop."
Price: 1799.99 |
| "Draper Draper Expert 180mm Clic and Clic-R Hose Clamp Tool" |
| "This expert quality 180mm Clic and Clic-R Hose Clamp Tool by Draper is used to release and refit reusable hose clips. It is perfect for releasing and refitting clic and clic-R type metal hose clips that are fitted to most engines. The spring loaded forged handles with PVC dipped grips provide added comfort."
Price: 15.98 |
| "Draper Draper PRC60/100 60mm-100mm Piston Ring Compressor" |
| "This ring compressor is constructed from spring steel with a steel adjusting key."
Price: 10.99 |
| "Draper Draper LATHE-300 Variable Speed Metal Work Lathe (250W)" |
| "The Draper LATHE-300 is a precison built metal working lathe, incorporated with variable speed reversible drive and powered cutting facility for right and left hand threads. The Draper 33893 Variable Speed Lathe is fitted with metric graduated scales, a mounted NVR switch and cutting guards, along with the self-centring three-jaw chuck."
Price: 839.99 |
| "Draper Draper Expert 1050W SDS MAX Breaker (230V)" |
| "The Draper Expert SDS Max Breaker delivers extreme durability and excellent breaking performance, complete with the SDS Max system with moulded soft grip handle."
Price: 119.98 |
| "Draper Draper W735 Flint Gun" |
| "This can be used for the lighting of oxy acetylene for welding or brazing."
Price: 3.98 |
| "Draper Draper HI-TORQ® Wheel Nut Sockets for Alloy Wheels" |
| "These Draper HI-TORQ® Wheel Nut Sockets for Alloy Wheels come as a set of three 6 point sockets in sizes 17, 19 and 21mm. They are manufactured from chrome molybdenum, and are fitted with internal and external nylon sleeves, preventing damage to wheels and nuts when in use. The come supplied in a handy carrying case."
Price: 17.99 |
| "Draper Draper RIL30E Expert 30 LED Rechargeable Inspection Lamp" |
| "The Draper RIL30E Inspection Lamp has been manufactured from heavy duty plastic with swivel joint enabling the light to be focused in any direction, whilst the magnetic back and base with rubber bumper allows for hands free working.This Rechargeable Inspection Lamp gives up to 18 hours continuous working time between charges, uses 3.7V Li-ion internal battery with five hour charging time (approx.). Supplied with BS approved 3 pin 230V charger."
Price: 43.99 |
| "Draper Draper SFAG25 Storm Force 6mm Collet Die Grinder" |
| "The Draper SFAG25 Storm Force Collet Die Drinder is fitted with a variable speed motor, rotating air inlet, which prevents air-lines from kinking and a soft grip casing for user comfort."
Price: 38.99 |
| "Draper Draper SFAG90 Storm Force 90° Mini Air Die Grinder" |
| "The Draper SFAG90 Mini Die Grinder is fitted with a variable speed motor, rotating air inlet, which prevents air-lines from kinking and a soft grip casing for user comfort. Suitable for use with a centralized dust extraction system"
Price: 31.99 |
| "Draper Draper SFRAD Storm Force Composite 10mm Reversible Air Drill" |
| "The Draper SFRAD Reversible Air Drill benefits from a low noise and low vibration design, whilst the Hi-tech composite body creates a lightweight and rugged tool ideal for use in professional workshops. This Air Drill has been manufactured with a planetary gear system with needle bearings for a far superior performance."
Price: 32.98 |
| "Draper Draper 8 Piece 1/2"" Square Drive Tx-Star Impact Socket Bit Set" |
| "The Draper 8 Piece 1/2" Square Drive Tx-Star Impact Socket Bit Set is compatible with †Torx fixing systems. The sockets have an integral Draper TX-STAR® bit, forged from chrome molybdenum steel, hardened and tempered with a black phosphate finish for corrosion protection. There is also a groove and two holes for the retaining ring and pin. The sockets come packed in a handy carrying/storage case. Safety Note: ONLY impact sockets and accessories can be used with air or electric powered wrenches. NEVER use silver chrome vanadium steel sockets which can shatter and cause personal injury."
Price: 39.98 |
| "Draper Draper SFAH4 Storm Force Composite Air Hammer and Chisel Kit" |
| "The Draper SFAH4 Air Hammer and Chisel Kit is fitted with a variable speed motor and a rotating air inlet helping prevent air-lines from kinking. The low noise, low vibration, low weight and silenced motor outlet provide maximum user comfort and performance. Supplied with a range of accessories including panel cutter, rivet cutter, bush splitter, spot weld splitter and piercing cutter complete in carrying case."
Price: 26.98 |
| "Draper Draper Expert RPS 650cc Aluminium Refillable Pressure Sprayer" |
| "This screw-top refillable canister may be pressurised from your compressor or hand/foot pump via the tyre type valve. It is suitable for many workshop applications and fitted with an automatic safety release valve. It also has a dual action, extra long, folding nozzle to allow access to difficult to reach areas."
Price: 36.98 |
| "Draper Draper HRPAF Expert 210mm Hog Ring Pliers" |
| "These Draper Hog Ring Pliers are designed for use with hog rings used in vehicle interiors, upholstery and fencing applications. Automatic feed for one hand operation."
Price: 38.99 |
| "Draper Draper SFMAR14 Storm Force 1/4'' Sq.Dr. Stubby Air Ratchet" |
| "Draper's SFMAR14 Stubby Air Ratchet is fitted with a high tech motor with a simple forward and reverse feature. This Air Ratchet has been designed for use in professional workshops and manufactured with a casing made from the latest composite plastic and full cage gear with needle bearings."
Price: 28.99 |
| "Draper Draper RIL/COBV2/GR COB LED and UV LED Inspection Lamp" |
| "The Draper RIL/COBV2/GR Inspection Lamp has been fitted with a COB face-plate LED producing an impressive 350 lumens and the 1W LED on the end plate delivers 80 lumens. The end plate is also fitted with three Ultra Violet LEDs transforming the lamp into torch. This Draper lamp is powered by a rechargeable Li-ion battery, delivering enhanced battery efficiency, while the base is manufactured with an integrated magnet and the swivel joint permits the light to be used in any 360 degree position."
Price: 43.99 |
| "Draper Draper RIL/COBV2/YW COB LED and UV LED Inspection Lamp" |
| "This Draper Inspection Lamp is fitted with a 1 Watt LED and 3 Ultra Violet LEDs on the end plate transforming the lamp into torch. The COB face plate LED produces an impressive 350 lumens and the 1W LED delivers 80 lumens, whilst the UV LEDs enable detection of leaks on cooling systems and air-con systems. Powered by a rechargeable Li-ion battery, delivering enhanced battery efficiency. The base is manufactured with integrated magnet and the swivel joint permitting the light to be used in any 360 degree position."
Price: 43.99 |
| "Draper Draper RUBL36 SMD LED Under Bonnet Inspection Lamp" |
| "Manufactured with magnetic swivel end caps this Draper Under Bonnet Inspection Lamp can be attached to metal surfaces as well as being fitted with a under bonnet hanger, whilst the light unit can swivel 120° in its holder and switches between 36 SMD’s (600 lumens) or 16 SMD’s (300 lumens)."
Price: 73.99 |
| "Draper Draper SFAS150 Storm Force Composite 150mm Dual Action Air Sander" |
| "The Draper SFAS150 Storm Force Dual Air Sander is designed to provide low noise and low vibration, whilst the high speed mechanism ensures greater stock removal and fitted with a high-tech variable speed control lever for ultimate flexibility. This Air Sander has a comfortable ergonomic handle and lightweight housing to assist in the prevention of cold-sink on the user."
Price: 55.99 |
| "Draper Draper Expert ACDC160P 160A TIG HF WELDER (230V)" |
| "This Draper TIG Welder is supplied complete with TIG torch, one tungsten electrode, earth clamp and cable, ARC electrode holder and foot pedal control.Features: Microprocessor-controlled inverter with AC/DC pulse technology, High frequency start function, TIG AC and DC welding, Slope down TIG function, Complete with TIG torch and earth clamp, Digital display."
Price: 689.99 |
| "Draper Draper SC100 Hydraulic Spring Compressor" |
| "The Draper SC100 Hydraulic Spring Compressor offers expert Quality, powerful two tonne hydraulic spring compressor designed for professional workshop use. The all-steel construction securely clamps and easily compresses coil springs for safe and easy dismantling of suspension units.A heavy duty, full safety cage is fitted for added user protection and the high quality clamps and yokes securely grip a wide range of spring configurations and diameters. The powerful hydraulic pump provides a totally independent operation allowing for use without the need for electric or air power sources and because it’s entirely mobile can be moved to the job as required."
Price: 2219.00 |
| "Draper Draper IPC41 Expert 40A Plasma Cutter Kit (230V)" |
| "The Draper IPC41 Plasma Cutter Kit features microprocessor controlled inverter technology making it suitable for cutting any electrically conductive material."
Price: 347.98 |
