| "Trend Trend RBT/2 Routabout Kit 18mm x 1/2"" Shank" |
| "Cuts neat, circular holes in chipboard floors allowing access to pipes & cables beneath in seconds.Shank Diameter 1/2 inchFloor thickness 18 mmAccess hole diameter 250 mmMax. load capacity 200 kgThis product includes:1 x Routabout template3 x Spacer rings1 x Special TCT router cutter1 x 30mm Plastic guide bushPlease refer to UK Building Regulations Approved Document B and any amendments before using this accessory."
Price: 61.99 |
| "Trend Trend TEMP/PD/R/D Panel Door Set Template" |
| "Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door.D 376 mmD2 310 mmC 102 mmR 264 mmDoor width possible 470 to 510 mm"
Price: 16.99 |
| "Trend Trend TEMP/IN/SWA Swan Inlay Template" |
| "Clear 6mm plastic inlay templates for use with inlay kit fitted to a plunge router.Width 182 mmHeight 220 mmThickness 6 mmAperture size 130 mm x 168 mm"
Price: 12.98 |
| "Trend Trend SNAP/MD1/SET Snappy Masonry Drill Set" |
| "Tungsten Carbide Tipped masonry drills to suit wall plugs. This set includes:1 x 5mm masonry drill1 x 6mm masonry drill1 x 7mm masonry drill1 x 8mm masonry drillThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders."
Price: 11.34 |
| "Trend Trend VJS/CG/24 Varijig Clamp Guide" |
| "For accurate guiding of router, saws and jigsaws.Max clamp length 24 inches (610 mm)Min clamp length 1/2 inch (12.7 mm)Extrusion width 54mmExtrusion height 15.8mmOverall length 835mmLength fixed jaw to end of handle 125mmLength max position of sliding jaw to clamp end 98mmSliding jaw finger wing width 73mm"
Price: 32.40 |
| "Trend Trend TM/SLP/95 Template Material Laminate" |
| "For making templates, vacuum beds, jigs and fixtures.Size 9.5 x 580 x 580 mm"
Price: 59.99 |
| "Trend Trend TEMP/LUC/57 57mm Uppercase Letter Templates" |
| "Clear plastic letter templates for writing words for signs including house names. The templates are used with a 13mm guide bush and 8mm diameter cutter."
Price: 49.99 |
| "Trend Trend VJS/CG/RBP Router Base Plate" |
| "Plunge router base base accessory for the Varijig clamp guides.Plate length 228 mmPlate width 229 mmPlate thickness 6 mmThis product includes: 1 x 2mm A/F hex key"
Price: 23.99 |
| "Trend Trend VJS/CK Vairijig System Clamp Kit (pair)" |
| "Pair of sliding friction clamps with 32mm clamping thickness."
Price: 29.99 |
| "Trend Trend TEMP/COR/A Corner/Hole Template" |
| "A template to rout holes of various diameters and to put a concave or convex shape on the component.Size 290 x 290 x 8 mm"
Price: 49.99 |
| "Trend Trend VJS/CG/EXT Varijig Clamp Guide Accessory" |
| "Lever extension handle for Varijig clamp guides.Length 180 mmWidth 27 mmThickess 9 mm"
Price: 7.39 |
| "Trend Trend SNAP/PHD/95 Snappy 9.5mm Pocket Hole Drill" |
| "A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs.D 3/8 inchD 9.5 mmShank Diameter 1/4 inch hexPilot diameter 4.2mmPilot length 13 mmThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders."
Price: 16.63 |
| "Trend Trend SNAP/QCSDS Snappy Quick Chuck and SDS+ Shank" |
| "Allows Trend Snappy bits to be used in drills with SDS+ chucks.The Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders."
Price: 16.63 |
| "Trend Trend TM/SLP/65 Template Material Laminate" |
| "For making templates, vacuum beds, jigs and fixtures. Size 6.5 x 580 x 580 mm"
Price: 40.99 |
| "Trend Trend SNAP/DBG/12 Snappy 4.36mm Drill Bit Guide" |
| "Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .D 11/64 inchD 4.36 mmShank Diameter 1/4 inch hexScrew size No.12 (5.5 mm)The Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders."
Price: 21.92 |
| "Trend Trend TEMP/PD/R/F Panel Door Set Template" |
| "Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door.D 470 mmD2 398 mmC 102 mmR 372 mmDoor width possible 565 to 600 mm"
Price: 17.99 |
| "Trend Trend SNAP/MAG Snappy Magnetic Screw Holder" |
| "Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring.D 14 mmOL 62 mmShank Diameter 1/4 inch hexIncludes No. 2 Pozi bitThe Trend Snappy hex shank allows for quick bit changes using the Snappy tool holders."
Price: 9.98 |
| "Trend Trend STAIR/A Stair Jig A Complete Closed Riser" |
| "This template jig is a well proven means of routing out stair housings quickly and accurately.Tread Thickness 22-32 mmSlider Diameter 30 mmNosing Adjustment 16-19 mmLength 858 mmHeight 485 mmWidth 9.5 mmWeight 6.17kgThis product includes:1 x Sub-base1 x Adjustable reversible clamp bar1 x Reversible clamp bar1 x Nosepiece1 x Line-up pin & bush2 x Spanners"
Price: 197.99 |
| "Trend Trend SNAP/D/4MM Snappy 4mm Drill & Adapter" |
| "The HSS drill bit is gripped by a spring steel collet into the hex shaft."
Price: 4.16 |
| "Trend Trend TEMP/IN/TUL Tulip Inlay Template" |
| "Clear 6mm plastic inlay templates for use with inlay kit fitted to a plunge router.Width 137 mmHeight 135 mmThickness 6 mmTulip height approx.77 mmAperture size 86 mm x 86 mm"
Price: 12.98 |
| "Trend Trend TM/ACR/8 Template Material Acrylic" |
| "Square sheet of clear acrylic for use when making routing templates and jigs.Size 8 x 495 x 495 mm"
Price: 32.99 |
| "Trend Trend TEMP/BH/A Butt Hinge Template" |
| "A routing template which allows a router to create a hinge recesses on a door.Size 214 mm x 135 mm x 8 mmDoor thickness min. 34 mmDoor thickness max. 44 mmHinge recess length 75 mmHinge recess length 100 mmThis product includes: 1 x 75mm hinge template1 x 100mm hinge template"
Price: 47.98 |
| "Trend Trend TEMP/OTB/A Offset Trenching Base" |
| "Ideal for housing cuts where oversize or undersize board is used.Size 200 x 200 x 8 mm with 1.0 mm offset.Aperture dia. 30 mmMax. cutter dia. 26 mmThis product includes:1 x Hexagon shaped base1 x Dual 1/4 inch/8mm tapered line-up pin2 x Fixing screws"
Price: 33.98 |
| "Trend Trend VJS/TG/JIG Varijig Tenon and Grooving Jig" |
| "Allows grooves and tenons to be cut using a router.Working length based on 30 mm guide bush and 12 mm diameter cutter being used:-Max. without end stops used 412 mmMax. with one end stop used 397 mmMax. with two end stops used 382 mmMax. working width using end stops* (12mm dia. cutter) 18 mmMax. width adjustment depending on router base diameter 70 mm*Due to end stop length"
Price: 119.00 |
| "Trend Trend TEMP/LR/A Lock Recess Templates" |
| "Clear plastic template for use with any plunge router to accurately fit 2, 3 and 5 lever sash and dead mortise locks.Size 320 mm x 135 mm x 8 mmIncludes templates for locks having the following face-plate dimensions:-Imperial (Metric) (D x OL)Template22.2x156 mm (7/8""x 6 1/8"")122.5x152.5 mm (7/8""x 6 "" )225.4x133.5 mm (1""x 5 1/4"" )525.4x153 mm (1""x 6"")726x162mm1225.1x58mm (ERA)15 This product includes:6 x Face Plate Templates3 x Mortise Templates"
Price: 67.99 |
| "Trend Trend TEMP/NUC/57 57mm Number Templates" |
| "Clear plastic number templates for writing words for signs including house numbers. The templates are used with a 13mm guide bush and 8mm diameter cutter."
Price: 25.99 |
| "Trend Trend GB/5/Q Sub-Base" |
| "A solid laminate sub base which is suitable for the Triton TRB001 and MOF001 routers.Diameter 170 mmThickness 8 mmThis product includes: 1 x Sub base1 x Template Guide Bush1 x 1/2"" Line-up pin1 x 1/4"" Line-up pin"
Price: 34.99 |
| "Trend Trend ME/JIG Mini Ellipse Jig" |
| "The Mini Ellipse Jig is ideal for routing elliptical picture frames, mirrors, clocks and small coffee tables.Working on the same principle as the Ellipse Jig, the Mini Ellipse Jig, produced from plastic will cut much smaller ellipses.The main plate will accept most makes of small router for which screws are provided.By removing one slide and using a special pin, the jig can be used to accurately cut circles.For marking out prior to cutting, the plate can be fitted with a pencil plug.The jig is then turned into a drawing instrument.This product includes: 1 x Cross Frame1 x Main plate2 x Sliders1 x Circle slider1 x Pencil plug1 x Set of securing screws"
Price: 135.00 |
| "Trend Trend MT/JIG Mortise & Tenon Jig (Imperial size)" |
| "Enables mortise & tenons and dowel joints to be cut with a router.Material thickness min. 12 mmMaterial thickness max. 47 mmTenon thickness min. 4.8 mmTenon thickness max. 16 mmTenon width max. using vertical guide+ 90 mmTenon length max.++ Approx. 25 mmMortise length max. using vertical guide+++ 90 mmAngle tilt compound -10 degree to 45 degrees + on end of 100 mm wide material.This product includes:5 x Plastic guide bushes 15.9mm, 22.2mm, 28.6mm, 30.2mm & 31.8mm1 x Metal guide bush 25.4mm4 x Clamps1 x Guide bush collar1 x Set-up Bar imperial scale"
Price: 239.00 |
| "Trend Trend PRT Professional Router Table (230V)" |
| "Professional portable router table with aluminium table surface and back fence for floor & bench mounting use. Floor or bench standing with removable legs and adjustment for uneven floors.Extruded 8mm thick aluminium alloy table top with minimal loss of cutter depth. Cutter aperture of 90mm allows use of the largest router cutters available.Cast back fence with extruded adjustable alloy cheeks and 'T' slots.Made to EN standards, with back fence accuracy of 0.5 degree & table flatness of 0.5mm.With a suitable size and weight enabling easy re-positioning around the workshop & transportation for on-site use.Removable centre plate of table will need to be re-drilled for other makes and models of medium & heavy duty routers.Router, fine height adjuster and spelch block not included."
Price: 659.00 |
