 |
| Navy Blue Thin Suspenders - Matte 3/4 Inch Wide |
| $14.95 |
| Navy blue thin suspenders in the perfect fashion width - thin but not too skinny and not too wide, just right! Pair...[Read More] |
 |
| Wired Lighting Bar 13 Amp with DMX Sockets 4m Black |
| Wired Lighting Bar with In & Out 3 Pin DMX per Socket. PowerCon-In & Out with DMX. Black or Aluminium Finish. Available in 4m- 6m or 8m Lengths. Alternative Combinations Available on Request. These wired lighting bars result in a neat & tidy lighting installation with very little need for unsightly cable runs or ties- making them ideal for professional installation in a range of venues including theatres- schools and commercial venues. The wired lighting bar has a Neutrik powercon-in- on one end and a powercon-out at the other- this enables linking of multiple bars if required. The bar has a 13 amp socket for each light and each socket has a 3 pin DMX in and out- in close proximity to the socket. Both the power-in & power-out have a DMX socket close by. This really aids connection time of the lights- making any install quick- simple and tidy. Please note; in the event of one socket not being used- a DMX link lead may be required to carry on the data run Each lighting bar is made from 50mm tube and is offered in a black or silver finish. These are very robust bars designed for professional use and can take a 78kg load between every 2 meter support points. Manufactured to all current regulations- they also use tri-rated cable throughout. We would recommend a hanging point every 1 to 1.5m- this of course does depend on the load being hung. If you are unsure please contact our technical support or qualified engineer. We recommend hanging these bars with NT30400 brackets and using M12 stud. The 4m bar has 6 x 13A sockets The 6m bar has 8 x 13A sockets The 8m bar has 10 x 13A sockets Other socket combinations and configurations can be manufactured to suit your exact requirements- please contact us for a quote.. Wired lighting bars for stage use- DMX sockets pre-fitted- 13 amp mains powered with a choice of length and finish. wired lighting bar-powered lighting-iwb
Price:  |
| Wired Lighting Bar 13 Amp with DMX Sockets 6m Aluminium |
| Wired Lighting Bar with In & Out 3 Pin DMX per Socket. PowerCon-In & Out with DMX. Black or Aluminium Finish. Available in 4m- 6m or 8m Lengths. Alternative Combinations Available on Request. These wired lighting bars result in a neat & tidy lighting installation with very little need for unsightly cable runs or ties- making them ideal for professional installation in a range of venues including theatres- schools and commercial venues. The wired lighting bar has a Neutrik powercon-in- on one end and a powercon-out at the other- this enables linking of multiple bars if required. The bar has a 13 amp socket for each light and each socket has a 3 pin DMX in and out- in close proximity to the socket. Both the power-in & power-out have a DMX socket close by. This really aids connection time of the lights- making any install quick- simple and tidy. Please note; in the event of one socket not being used- a DMX link lead may be required to carry on the data run Each lighting bar is made from 50mm tube and is offered in a black or silver finish. These are very robust bars designed for professional use and can take a 78kg load between every 2 meter support points. Manufactured to all current regulations- they also use tri-rated cable throughout. We would recommend a hanging point every 1 to 1.5m- this of course does depend on the load being hung. If you are unsure please contact our technical support or qualified engineer. We recommend hanging these bars with NT30400 brackets and using M12 stud. The 4m bar has 6 x 13A sockets The 6m bar has 8 x 13A sockets The 8m bar has 10 x 13A sockets Other socket combinations and configurations can be manufactured to suit your exact requirements- please contact us for a quote.. Wired lighting bars for stage use- DMX sockets pre-fitted- 13 amp mains powered with a choice of length and finish. wired lighting bar-powered lighting-iwb
Price: |
| Wired Lighting Bar 13 Amp with DMX Sockets 6m Black |
| Wired Lighting Bar with In & Out 3 Pin DMX per Socket. PowerCon-In & Out with DMX. Black or Aluminium Finish. Available in 4m- 6m or 8m Lengths. Alternative Combinations Available on Request. These wired lighting bars result in a neat & tidy lighting installation with very little need for unsightly cable runs or ties- making them ideal for professional installation in a range of venues including theatres- schools and commercial venues. The wired lighting bar has a Neutrik powercon-in- on one end and a powercon-out at the other- this enables linking of multiple bars if required. The bar has a 13 amp socket for each light and each socket has a 3 pin DMX in and out- in close proximity to the socket. Both the power-in & power-out have a DMX socket close by. This really aids connection time of the lights- making any install quick- simple and tidy. Please note; in the event of one socket not being used- a DMX link lead may be required to carry on the data run Each lighting bar is made from 50mm tube and is offered in a black or silver finish. These are very robust bars designed for professional use and can take a 78kg load between every 2 meter support points. Manufactured to all current regulations- they also use tri-rated cable throughout. We would recommend a hanging point every 1 to 1.5m- this of course does depend on the load being hung. If you are unsure please contact our technical support or qualified engineer. We recommend hanging these bars with NT30400 brackets and using M12 stud. The 4m bar has 6 x 13A sockets The 6m bar has 8 x 13A sockets The 8m bar has 10 x 13A sockets Other socket combinations and configurations can be manufactured to suit your exact requirements- please contact us for a quote.. Wired lighting bars for stage use- DMX sockets pre-fitted- 13 amp mains powered with a choice of length and finish. wired lighting bar-powered lighting-iwb
Price: |
| Wired Lighting Bar 13 Amp with DMX Sockets 8m Aluminium |
| Wired Lighting Bar with In & Out 3 Pin DMX per Socket. PowerCon-In & Out with DMX. Black or Aluminium Finish. Available in 4m- 6m or 8m Lengths. Alternative Combinations Available on Request. These wired lighting bars result in a neat & tidy lighting installation with very little need for unsightly cable runs or ties- making them ideal for professional installation in a range of venues including theatres- schools and commercial venues. The wired lighting bar has a Neutrik powercon-in- on one end and a powercon-out at the other- this enables linking of multiple bars if required. The bar has a 13 amp socket for each light and each socket has a 3 pin DMX in and out- in close proximity to the socket. Both the power-in & power-out have a DMX socket close by. This really aids connection time of the lights- making any install quick- simple and tidy. Please note; in the event of one socket not being used- a DMX link lead may be required to carry on the data run Each lighting bar is made from 50mm tube and is offered in a black or silver finish. These are very robust bars designed for professional use and can take a 78kg load between every 2 meter support points. Manufactured to all current regulations- they also use tri-rated cable throughout. We would recommend a hanging point every 1 to 1.5m- this of course does depend on the load being hung. If you are unsure please contact our technical support or qualified engineer. We recommend hanging these bars with NT30400 brackets and using M12 stud. The 4m bar has 6 x 13A sockets The 6m bar has 8 x 13A sockets The 8m bar has 10 x 13A sockets Other socket combinations and configurations can be manufactured to suit your exact requirements- please contact us for a quote.. Wired lighting bars for stage use- DMX sockets pre-fitted- 13 amp mains powered with a choice of length and finish. wired lighting bar-powered lighting-iwb
Price: |
| Wired Lighting Bar 13 Amp with DMX Sockets 8m Black |
| Wired Lighting Bar with In & Out 3 Pin DMX per Socket. PowerCon-In & Out with DMX. Black or Aluminium Finish. Available in 4m- 6m or 8m Lengths. Alternative Combinations Available on Request. These wired lighting bars result in a neat & tidy lighting installation with very little need for unsightly cable runs or ties- making them ideal for professional installation in a range of venues including theatres- schools and commercial venues. The wired lighting bar has a Neutrik powercon-in- on one end and a powercon-out at the other- this enables linking of multiple bars if required. The bar has a 13 amp socket for each light and each socket has a 3 pin DMX in and out- in close proximity to the socket. Both the power-in & power-out have a DMX socket close by. This really aids connection time of the lights- making any install quick- simple and tidy. Please note; in the event of one socket not being used- a DMX link lead may be required to carry on the data run Each lighting bar is made from 50mm tube and is offered in a black or silver finish. These are very robust bars designed for professional use and can take a 78kg load between every 2 meter support points. Manufactured to all current regulations- they also use tri-rated cable throughout. We would recommend a hanging point every 1 to 1.5m- this of course does depend on the load being hung. If you are unsure please contact our technical support or qualified engineer. We recommend hanging these bars with NT30400 brackets and using M12 stud. The 4m bar has 6 x 13A sockets The 6m bar has 8 x 13A sockets The 8m bar has 10 x 13A sockets Other socket combinations and configurations can be manufactured to suit your exact requirements- please contact us for a quote.. Wired lighting bars for stage use- DMX sockets pre-fitted- 13 amp mains powered with a choice of length and finish. wired lighting bar-powered lighting-iwb
Price: |
| Wired Lighting Bar 4x 13 Amp Sockets Aluminium 4m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price:  |
| Wired Lighting Bar 4x 13 Amp Sockets Black 4m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price: |
| Wired Lighting Bar 6x 13 Amp Sockets Aluminium 6m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price: |
| Wired Lighting Bar 6x 13 Amp Sockets Black 6m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price: |
| Wired Lighting Bar 8x 13 Amp Sockets Aluminium 8m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price: |
| Wired Lighting Bar 8x 13 Amp Sockets Black 8m |
| 13 Amp Sockets. Black or Aluminium Finish. 4m- 6m or 8m Options. Terminated to Powercon. 50mm Tubing. Make installation quick and easy with these pre-made lighting bars- available in a choice of 4m- 6m or 8m bars in black or aluminium. Designed for use with LED fixtures. The 4m bar has 4 sockets- the 6m has 6 sockets and the 8 has 8 sockets. The sockets are standard 13 amp type so when LED fixtures are purchased no plug changing is required. The whole bar is terminated with a Neutrik powercon making this bar quick to connect to a power supply. Other bar options are available- please email our sales team for a quote.. POWERED LIGHTING BAR
Price: |
| Wireless DMX 512 Transmitter/Receiver Set |
| Wireless Receiver/Transmitter Set. DMX512 Compatible. 7 Frequency Groups. Plug & Play. XLR Male & Female 3 Pin Connection. Supplied With Power Supply. 100m Line Of Sight Working DistancePower Supply: 5.3Vdc 650ma (x2) Frequency Band: 2.4-2.525 Ghz Working Distance: 100m Line Of Sight Dimensions: 132 x 90 x 20mm (x2) Weight: 226g Each Unit. . Description. . An excellent cost effective wireless DMX receiver & transmitter set. Perfect for applications where wiring from a controller to DMX lights is hard to install. Lighting professionals knows the most time consuming job setting up an installation or show are the cable runs and using our wireless DMX will dramatically reduce installation times and eliminating messy cabling. Mobile shows are quicker and easier to setup and pull down times reduced to a minimum whilst making fixed installations simpler to manage and operate. . Operation. . The WIRELESS-TR set is easy to use and comes in the form of male and female 3 pin XLR connectors. Simply plug the male XLR into a DMX controller and the female XLR into the first DMX light in the chain- (each plug requires power so they are supplied is own UK 5 Vdc power supply). Once connected and a DMX signal is seen the receiver LED will flash green and the transmitter will flash red- your connected- it's as simple as that. There are 7 different working frequencies to choose from- these are selected by pushing a small switch on each connector which will display a different colour LED. The frequency selection should be done before connection to any lights or controller and the LED's should be set to the same colour- this will allow the user to use multiple DMX lines in one venue or if one frequency is already being used simply select another frequency. You can use as many receivers as you need as long as they are set to the same channel as the transmitter. So for a theatre applications you can use one transmitter and then install a receiver to each wired lighting bar- then use DMX cables to wire the rest of the lights on each bar. For an up-lighter application you could use one transmitter and a wireless receiver for each up-lighter. You can purchase additional wireless receivers form us by using the code WIRELESS-R. DMX CONTROLLER
Price:  |
| Wireless DMX and RDM Transmitter and Receiver in One |
| "Single Universe Outdoor DMX/RDM Transmitter/Receiver. W-DMX G5T Protocol- Backward Compatible with G3 and G4S. Datasafe Technology- Wireless Fidelity & Error Correction. Full DMX 512 & RDM support. 2.4GHz Radio- License Free Worldwide. 12V Backup Input. Interchangeable Antennas. 3 or 5 Pin DMX. PowerCon Cable Not IncludedPower Supply: 12Vdc Frequency Band: 2.4GHz Working Distance: 750m DMX Input/Output: 3 or 5 Pin XLR Dimensions: 234 x 150 x 60mm Weight: 1.05Kg. The W-DMX Blackbox F-1 G5 Transceiver is a single- highly flexible wireless solution suitable for transmitting and receiving both DMX and RDM signals. Suitable for both 2.4GHz- 5.2GHz or 5.8GHz frequency bands- thus giving access to more channels and hence greater reliability. it the optional Ethernet input this product can support any protocol input- be it Art-Net- sACN or ETC Net- and any protocol output- Ethernet or RS-485. The unit is housed in a tough metal casing so is well suited to installation use and offer ""One Button to Go"" for easy use.. wireless dmx-dmx transmitter-dmx receiver"
Price:  |
| Wireless Stereo Audio Receiver |
| "Wireless Receiver for Speakers . Analogue Line Level Output Via 1/4"" Jack. Power Supply IncludedPower Supply: DC 9v Frequency Range: 20-20KHz THD: <0.3% Range: 30m Dimensions: 116 x 86 x 35mm Weight: 118g. Use this wireless audio receiver in conjunction with WSA-24T (sold separately). Running long cables around a venue can difficult and if not done properly dangerous. This audio receiver when used in conjunction with the relevant transmitter allows audio signals to be sent wirelessly over a range of 30 meters. Using ultra high frequency the audio is sent with minimal latency. A perfect way to send a mixer signal to powered speakers or amplifiers. The input provided are left and right jack or XLR connections.. WIRELESS AUDIO RECEIVER"
Price:  |
| Wireless Stereo Audio Transmitter |
| "Wireless Transmitter for Speakers. Stereo/Mono Selector Switch. Analogue Line Level Input Via 1/4"" Jack & 3 Pin XLR. Power Supply Included. Compatible with WSA-24RPower Supply: DC 9v Frequency Range: 20-20KHz THD: <0.3% Range: 30m Dimensions: 130 x 130 x 54mm Weight: 470g. Use this wireless audio receiver in conjunction with WSA-24R (sold separately). Running long cables around a venue can be difficult and if not done properly dangerous. This audio transmitter when used in conjunction with the relevant receiver allows audio signals to be sent wirelessly over a range of 30 meters. Using ultra high frequencies the audio is sent with minimal latency. A perfect way to send a mixed signal to powerful speakers or amplifiers. The outputs provided are left and right jack sockets.. WIRELESS AUDIO TRANSMITTER"
Price:  |
| Wireless Tapedriver for LED Puretape and Colourtape |
| Power Supply: 5-24Vdc Max Load: 5A x 4 Outputs- 20A Max Dimensions: 175 x 44 x 30mm Weight: 150g. Connect this driver to a router and combine with the Tape4L transmitter for easy control of RGBW LED tape. The driver can be connected to a maximum 20m of RGBW colourtape if all recommendations are observed.. Wireless tapedriver
Price:  |
| Wireless-Tr Receiver |
| Wireless Receiver. DMX512 Compatible. 7 Frequency Groups. Plug & Plug. 3 Pin XLR Connection. Supplied with Power Supply. 100m Line of Sight Working DistancePower Supply: 5.3Vdc 650ma Frequency Band: 2.4-2.525 Ghz Working Distance: 100m Line Of Sight Dimensions: 132 x 90 x 20mm Weight: 226g . A handy wireless receiver which is to be used with our wireless-tr set. This unit can be added to the wireless-tr if multiple DMX lines are required. Each receiver is supplied with a power supply. The receiver is in the form of a female XLR plug. To set the working frequency simply use the small switch on the side of the unit to set the same colour LED as the transmitter- this should be done before connection is made between the DMX controller and transmitter and DMX light to receiver. A great way to cut down on time consuming cable runs.. DMX CONTROLLER
Price:  |
| Wood Printed Fabric |
| Printed Wood Fabric . Flame Retardent . Sold by the Linear MetreDimensions: 1500mm (Width) Sold Per Metre. Realistic wood printed fabric- ideal for recreating any wood effect or building. The wood slats are printed horizontally but the fabric could be turned upright to create a wood panel fence effect. Please keep in mind the roll width when working out your requirements. Roll width 150cm. Sold by the linear metre. Flame retardent.. stage cloth-dj cloth-backdrop-stage curtain
Price:  |
| Wood Stage Platform 1 x 0.5m |
| Lightweight Aluminium Sections. Natural- Untreated Plywood Construction. Panels can be Stained/Varnished to the Required Colour. Suitable for both Indoor and Outdoor Applications. Cross Beams Strengthen the Deck Structure. Just 9cm Stacking HeightMaximum Load: 750Kg/m2. The Global Stage Deck platform is a mobile stage system for indoor and outdoor use. This range is ideal for concerts- theatres- schools- public halls- exhibitions- fashion shows or wherever a stage is needed. The aluminium profile offers superior flexibilityand compatibility with many other manufacturers. Due to the external notch- additional parts such as handrails can be attached. Furthermore platforms can be connected via the notches whilst the 'Deck Leveller' helps to align them at the same height. The connection for the attachment of legs has been specially designed for both round and square versions with a maximum dimension of 60 x 60mm.. stage component-global stage-school stage
Price:  |
| Wood Stage Platform 1 x 1m |
| Lightweight Aluminium Sections. Natural- Untreated Plywood Construction. Panels can be Stained/Varnished to the Required Colour. Suitable for both Indoor and Outdoor Applications. Cross Beams Strengthen the Deck Structure. Just 9cm Stacking HeightMaximum Load: 750Kg/m2. The Global Stage Deck platform is a mobile stage system for indoor and outdoor use. This range is ideal for concerts- theatres- schools- public halls- exhibitions- fashion shows or wherever a stage is needed. The aluminium profile offers superior flexibilityand compatibility with many other manufacturers. Due to the external notch- additional parts such as handrails can be attached. Furthermore platforms can be connected via the notches whilst the 'Deck Leveller' helps to align them at the same height. The connection for the attachment of legs has been specially designed for both round and square versions with a maximum dimension of 60 x 60mm.. stage component-global stage-school stage
Price:  |
| Wood Stage Platform 2 x 0.5m |
| Lightweight Aluminium Sections. Natural- Untreated Plywood Construction. Panels can be Stained/Varnished to the Required Colour. Suitable for both Indoor and Outdoor Applications. Cross Beams Strengthen the Deck Structure. Just 9cm Stacking HeightMaximum Load: 750Kg/m2. The Global Stage Deck platform is a mobile stage system for indoor and outdoor use. This range is ideal for concerts- theatres- schools- public halls- exhibitions- fashion shows or wherever a stage is needed. The aluminium profile offers superior flexibilityand compatibility with many other manufacturers. Due to the external notch- additional parts such as handrails can be attached. Furthermore platforms can be connected via the notches whilst the 'Deck Leveller' helps to align them at the same height. The connection for the attachment of legs has been specially designed for both round and square versions with a maximum dimension of 60 x 60mm.. stage component-global stage-school stage
Price:  |
| Wood Stage Platform 2 x 1m |
| Lightweight Aluminium Sections. Natural- Untreated Plywood Construction. Panels can be Stained/Varnished to the Required Colour. Suitable for both Indoor and Outdoor Applications. Cross Beams Strengthen the Deck Structure. Just 9cm Stacking HeightMaximum Load: 750Kg/m2. The Global Stage Deck platform is a mobile stage system for indoor and outdoor use. This range is ideal for concerts- theatres- schools- public halls- exhibitions- fashion shows or wherever a stage is needed. The aluminium profile offers superior flexibilityand compatibility with many other manufacturers. Due to the external notch- additional parts such as handrails can be attached. Furthermore platforms can be connected via the notches whilst the 'Deck Leveller' helps to align them at the same height. The connection for the attachment of legs has been specially designed for both round and square versions with a maximum dimension of 60 x 60mm.. stage component-global stage-school stage
Price:  |
| "Wooden Installation Speaker Black 10""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| "Wooden Installation Speaker Black 6""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| "Wooden Installation Speaker Black 8""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| "Wooden Installation Speaker White 10""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| "Wooden Installation Speaker White 6""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| "Wooden Installation Speaker White 8""" |
| Wooden Installation Speakers. Textured White Finish. Titanium Diaphragm HF Compression Driver. Supplied with Adjustable U-Brackets. CS610 and CS810 VESA Mount Compatible. CS-1035 Fitted with 35mm Pole Mount SocketCS610 Power: 100W RMS Frequency Response: 80Hz - 20kHz SPL: 93dB Dimensions: 300 x 225 x 315mm Weight: 5Kg CS810 Power: 100W RMS Frequency Response: 70Hz - 20kHz SPL: 93dB Dimensions: 410 x 280 x 250mm Weight: 8.9Kg CS1035 Power: 350W RMS Frequency Response: 75Hz - 20kHz SPL: 95dB Dimensions: 470 x 325 x 310mm Weight: 15.6Kg. Passive speaker cabinets with smooth and even frequency response for accurate delivery of music and vocal material. These speakers are manufactured from birch plywood with polyurethane texture coated finish and acoustic foam backed steel grilles. Fitted with steel U brackets and mounting hardware for convenient and neat installation. Understated minimalist design with premium quality performance.. Speaker Cabinet- Installation Speakers-passive Speaker-White Speaker-White Speaker Cabinet
Price:  |
| X-Ghost 360 3-in1 DJ Light by Atomic Pro |
| Gobo & Wash Effect in One Disco Light. Includes Red & Green Laser. IR Remote IncludedMains Input: 220-240Vac- 50/60Hz Power Consumption: 55w LED Wash: 8 x 1w RGBA Gobo Effect: 8 x 3w RGBW Laser: 100mW Red & 30mW Green Dimensions: 410 x 151 x 210mm Weight: 5Kg. Get a flexible lighting show from just one fixture- with gobo- wash and laser effects all packed into the X-Ghost 360. The gobos are large and create a stunning effect across the dancefloor- while the red & green laser is capable of producing multiple shapes. The LED wash offers red- green- blue and amber LEDS and is great for adding a bit of colour to the dance floor. There are 3 in-built programmes and 3 operating modes; Sound- auto & DMX. For the most simplistic use- the user can just plug and play- or why not link two in master/slave mode. For greater control and bigger set-ups use in DMX where you can unleash this lights full potential! The X-Ghost 360 is also supplied with an easy to use infra-red remote- giving you plenty of options for control.. LED Wash Effects Light-LED Wash Blinder-Effects Blinder
Price:  |
| X-Rush 4-in-1 Party Effect light by Atomic Pro |
| 4-in-1 LED Party Light. Multiple Effects Inc; Wash- Derby Gobo & Laser. Handheld IR Remote IncludedMains Input: 220-240Vac- 50/60Hz Power Consumption: 62w LED Gobo Effect: 8 x 3w (2R- 2G- 2B & 2W) LED Wash: 8 x 1w (2R- 2G- 2B & 2A) Derby Effect: 2 x 10w Quad (R- G- B & W) Laser Effect: Red & Green Dimensions: 634 x 232 x 319mm Weight: 7Kg. The ultimate party effects light- offering 4 different outputs from just one compact and simple to use light! The X-Rush disco light will cover the room in light beams from the crystal ball or classic Derby effects- wash the dance floor in an array of colours and amaze the audience with the red and green laser. Control is nice and straightforward; The user can choose to use in auto or sound mode- easily selectable from the digital menu on the reverse of the fixture- use the included IR remote or add the X-Rush to a bigger lighting rig with DMX. The X-Rush really does offer the flexibility and output required by the busy DJ or entertainer all in one simple- cost-effective solution!. LED Gobo Effect-Effects Light-LED Gobo Effect Blinder-Effects Blinder
Price:  |
