 |
| Navy Blue Thin Suspenders - Matte 3/4 Inch Wide |
| $14.95 |
| Navy blue thin suspenders in the perfect fashion width - thin but not too skinny and not too wide, just right! Pair...[Read More] |
 |
| Hill Audio Desktop Paging Microphone |
| Dynamic Capsule. Black Anodised Gooseneck 435mm Long. Locking Female XLR for Easy Exchange of Microphone. On/Off Switch. Male XLR on Rear of Base for Audio OutputFrequency Response: 50Hz-18kHz Connector: XLR Male Height: 435mm Weight: 1.2Kg. A dynamic goose neck desktop paging microphone with a locking switch for announcements in public and commercial venues. The goose neck has a length of 435mm and is terminated with a lockable XLR should the microphone be stored away when not in use. A male XLR output is found on the rear of the base unit for connection to a mixer or PA system. A two way switch faces the user on the base of the microphone which enables a mute function when not being used.. PA MICROPHONE
Price:  |
| Hill Audio IPA200 Power Amplifier |
| Light Weight Digital Amplifier. 2 x 80w Amplifier. Compact 1U HousingMains Input: 240Vac Power 4 ohms: 2 x 80w Power 8 Ohms: 2 x 50w Dimensions: 483 x 44.5 x 194mm Weight: 4.4Kg. A unique 2 zone amplifier for use with the Hill IMA200 or in conjunction with other suitable mixers. The Hill IPA200 is a 2 channel amplifier for restaurant & shop installations. Each amplifier can deliver 80 watts RMS per channel so will be suitable for many background applications but will also still be loud enough for gyms and bar installations. Each amplifier can be a left or right amplifier or stereo signals can be summed independently for zoning situations. There are two volume controls on the front as well as 2 controls on the rear panel that will allow the installer or owner to pre-set maximum volumes and adjust bass/treble controls on installation. Each output is totally independent and they have switchable high pass filters at 40Hz or 100Hz. 40Hz will help protect drivers against low frequency damage while the 100Hz can be set when the IPA200 is used with external subwoofer equipment. Inputs can either be unbalanced phonos or balanced XLR's. For permanent installations there are screw terminals for inputs and outputs to cut down on unnecessary connectors. For larger installations multiple IPA200 units can be connected using 1/4 jacks.. amplifier-2 zone amplifier-shop amplifier-restaurant amplifier
Price:  |
| Hill Audio IPM-1610 7 Channel Mic/Line Mixer |
| 5 Switchable Stereo Inputs. Headphone & Microphone Inputs. 12V Phantom Power for Microphones. Adjustable Auto Talk-Over. Output Mute ContactUnit Size: 1U Dimensions: 483 x 162 x 45mm Weight: 2.3Kg. The IPM-1610V2 7-channel mixer is a perfect fit at the heart of any installed sound system where flexibility needs to be paired with simplicity of operation. It offers 5 multi-purpose inputs which can either be fed with a balanced microphone signal or an unbalanced stereo line signal. One further balanced stereo line level input is specifically useful when processing an auxiliary line-level source from further distance- like a mixer on a stage- or the output of a different room's system. By inserting a signal cable into the provided 3.5mm TRS jack on the front- this channel can also be used for a local signal feed from a portable device. The additional- dedicated microphone input with adjustable talkover (priority) provides control over announcements. Every input - with the exception of the balanced stereo input - is equipped with rear-panel gain control and a front-panel 2-band equalizer. The external shutdown and emergency signal input connections allow integration with central announcement and evacuation systems.. Microphone Mixer
Price:  |
| Hill Audio LMD-1602FX 12 Channel Stage Mixer |
| "4 Mono Mic/Line Inputs- 2 Mono Mic/Stereo Line and 2 Stereo Line Inputs each with Gain Control. Additional Insert Jacks and One Knob Compressors for the 4 Mono Mic/Line Inputs. Dedicated 2-Track Input Channel with Selectable Input Source. Switchable +48V Phantom Power for Microphone Inputs. USB Stereo Soundcard for Replay and Recording. Detachable Plastic Side Panels and Mountable Metal Rack Ears IncludedPower Supply: 100-240Vac- 50/60Hz Mono Mic/Line Inputs: 4 Mono Mic/Stereo Line Inputs: 2 Stereo Inputs: 2 Dimensions: 329 ž 338 ž 102mm Weight: 3.75Kg. The LMD-1602FX-C-USB is all you could need in a single compact desktop mixer. 4 mic/line channels with low noise microphone stages- switchable phantom power and built-in one-knob compressor provide a proper feed for acoustic input signals. 2 mic/line stereo channels and 2 line stereo channels (all balanced)- cater for a multitude of stereo line level sources. The 2 unbalanced stereo inputs- either RCA or 3.5mm TRS- allow mobile players to be added for backing tracks or pause background music. For the latter- this input channel sports an ""exclusive"" function which leaves only this channel open but mutes all other inputs - perfect to switch between ""performance"" and ""break"" times with just a flip of a switch! A musical 3-band equalizer and a 2-Bus AUX system (1 pre- 1 post) complete the channel features. The post AUX bus is connected to the internal digital effects processor with 16 algorithms in 16 variations with a large LED display indicating the choice. Last but not least- a 7-band equalizer is assignable to either the master output or the AUX-pre (monitor) output- for the perfect tonal tuning when required. A USB stereo record/replay interface allows to either record the performance directly to a connected PC or play backing tracks from a PC.. Stage Mixer-Audio Mixer-19"" Rack Mixer-Rack Mount Mixer"
Price:  |
| Hill Audio LMD1402FX 10 Channel Stage Mixer |
| 8 Microphone Channels. 8 Mono Line Inputs. 2 Stereo Line Inputs. Switchable +48v Phantom Power for Microphone Inputs. DSP 24-Bit Effects Processor. USB InputMic Inputs: 8 Line Inputs: 10 (8 Mono- 2 Stereo) USB Inputs: 1 Dimensions: 372 x 266 x 60mm Weight: 2.6Kg. The Hill Audio LMD1402FX mixer is ideal for the travelling band or entertainer who requires more inputs and flexibility than a simple DJ mixer. The LMD1402FX has eight individual microphone channels which can be powered by switchable +48V phantom power- eight mono line inputs and two stereo line inputs giving masses of versatility for a small format mixer. The LMD1402FX is also home to a 24-bit effect processor and USB connection for recording and playback of audio held on a PC. The first eight channels have an independent 3 band EQ section along with AUX pre and post pots. Left and right panning and volume control is also adjustable via a rotary dial helping to keep the LMD1402FX as slimline as possible. The main output volume is controlled by a smooth 60mm fader and accompanied by a LED VU meter to keep an eye on output levels. Main output connections from the mixer are balanced ¬'' Jacks.. MIXING DESK
Price:  |
| Hill Audio LMR-1202FX 12 Channel Rackmount Mixer |
| "19'' 3U Rack Mount Mixer. Switchable +48V Phantom Power for Microphone Inputs. 2 Stereo Line Input Channels. 8 Wide Gain Dual Input Mic/Line Input Channels. Headphones Output with Dedicated Volume Control and Separate Rear Side Control Room Output. Full Metal Case with Detachable Rack EarsPower Supply: 100-240Vac- 50/60Hz Mic/Line Inputs: 8 Stereo Inputs: 2 Unit Size: 3U Dimensions: 483 x 88 x 95mm Weight: 3.75Kg. The LMR-1202FX is one of the most compact- fully-featured mixing consoles available- and with its 19''/3U form factor- a perfect fit for mobile band sound-systems or advanced sub-mixing tasks. 8 mono channels with dual line/mic inputs and high-headroom pre-amps are complemented by 2 stereo channels- with one of the latter equipped with a 3.5mm stereo socket. All inputs sport gain controls- 2-Band EQs- 2 AUX busses and Pan/Balance controls- plus a smooth 60mm volume fader. One of the two AUX busses is routed pre-fader as a monitor bus- the other post-fader and connected to the internal effects processor. This processor provides 16 highly useful digital effects in 16 variations- each with 24-bit conversion quality. Overall the LMR-1202FX is an affordable and portable- all-in one sound mixing solution- with superb 20dB headroom to its all-analog signal path.. Audio Mixer-19"" Rack Mixer-Rack Mount Mixer"
Price:  |
| Hill Audio LMR1204FXC 12 Channel Stage Mixer |
| "4 Microphone Inputs. 4 Mono Line Inputs. 4 Stereo Line Inputs. Switchable +48v Phantom Power for Microphone Inputs. DSP 24 Bit Stereo Effects Processor. USB Input. 19"" Rack MountableMic Inputs: 4 Line Inputs: 8 (4 Mono- 4 Stereo) USB Inputs: 1 Dimensions: 394 x 412 x 103mm Weight: 4.8Kg. The LMR1204FXC is a 19'' rack-mountable mixer ideal for small/medium sized applications where multiple inputs and a slick user interface is required. Suitable for installations and road use- the LMR1204FXC is great for stage shows and small band use with thanks to its multitude of input options. It houses four individual microphone channels with switchable +48V phantom power- four mono and four stereo line inputs as well as a whole host of output options in the form of sub-groups and auxiliary outputs. Channel inserts can be found on channels 1-4 for external effect processors should they be necessary however the onboard 24-bit stereo effects processor can handle most tasks thrown at it! A USB input can be found on the rear panel of the mixer for playback and basic recording functionality. Two 3.5mm audio jacks are located on the stereo input channels for easy hook up of generic media players and laptops.. MIXING DESK"
Price:  |
| Hill Audio LMR2442FXC 12 Channel Stage Mixer |
| "8 Mono Mic/Line Inputs. 2 Mono Mic/Stereo Line Inputs . 2 Stereo Line Inputs. Switchable +48v Phantom Power. DSP 24-Bit Stereo Effects Processor. USB for Replay & Recording. Control Room Output. 19"" Rack MountableMic Inputs: 10 Line Inputs: 14 USB Inputs: 1 Dimensions: 490 x 450 x 110mm Weight: 7.05Kg. ?The LMR2442FXC is a 12 channel stage mixer with built-in FX and USB compatibility ideal for small to medium size stage shows. There are 10 microphone inputs that can be phantom powered for condenser Mics if necessary. A handy feature of the LMR2442FXC is the one pot compressor for each MIC/LINE input making management of dynamics an easy task. Each input channel also benefits from a 4 band EQ- 4 AUX sends- solo and assignment controls adding to this impressive batch of features. The 11th and 12th channel feature an additional input option in the form of a 3.5mm for modern day MP3 and media sources such as iPhones- iPads and laptops. The output stage of the mixer has 4 sub-groups with jack connections and a main out via XLR and Jack connections. The USB connection on the rear panel can be used for simple digital playback from a PC or laptop. A comprehensive FX section is a 24-bit DSP with 15 algorithms in 6 groups and can be applied to any input channel. These can also be edited by 3 parameters per algorithm. 19"" RACKMOUNTABLE MIXER"
Price:  |
| Hill Audio PRX-2300 Electronic Crossover |
| "2 Way Stereo or 3 Way Mono Crossover. Frequencies Adjustable in Two Switchable Ranges. Mono Subwoofer Output with Independent Crossover Frequency Control. Output Level Controls & Mute Switches for all Bands. Balanced XLR Connectors on Inputs & Outputs. 19"" Rack MountableUnit Size: 1U Dimensions: 483 x 44.5 x 162mm Weight: 2.3Kg. Using an active crossover in a sound system will always sound better than using passive ones. Separating the bass frequencies from the high frequencies makes a big difference to the overall sound system performance. The RPX-2300 is a stereo 2-way or 3-way mono active crossover. Active crossover sits between mixer and amplifier- normally using balanced line level cables. The incoming signal is divided into different frequency bands via precise Linkwitz-Riley filters- and offer good speaker driver protection by their steep 24dB/Octave slope. For further protection- 25 Hz Low Cut filters are provided to eliminate inaudible high-energy bass content. The unit also offers an independently-adjustable subwoofer output- providing an extra low-frequency band in a control range from 10-235 Hz - making it effectively a 3-way stereo or 4-way mono active crossover. Mute and Phase Invert switches for all outputs make troubleshooting a breeze. Compared to digital loudspeaker management systems- the RPX-2300 is not only more affordable- it also offers greater ease-of-use and a full 20dB signal headroom that only an analogue processor can provide.. 3 WAY CROSSOVER"
Price:  |
| Hill Audio PSM2220 Installation Mixer |
| "2 Channel Triple Source. 3 Band Eq. 2 Microphone Inputs with Talkover. 2 Main Output. Balanced & Unbalanced OutputsPhono Inputs: 2 (Switchable to line) Line Inputs: 4 Mic Inputs: 2 Unit Size: 2U Dimensions: 483 x 88 x 95mm Weight: 2Kg. A 2U rack mountable DJ/installation mixer. The Hill PSM-2220 offers 2 triple choice inputs (phono- line or aux)- two microphone inputs with shared 3 band eq and talkover and independent on air switches. One mic input can be found on the front or both can be plugged in on the rear. The two channel mixer section has 3 band eq- gain and a crossfader to mix between the 2 channels. Suitable where space is at a premium but with all the necessary features DJ's would expect.. mixer-rack mount mixer-19"" mixer-channel monitoring mixer"
Price:  |
| Hill Audio PSM2420 6 Channel Mixer |
| "19 Inch Rack Mount Mixer. Line & Phono Inputs. 2 Mic Inputs. Adjustable Subwoofer Output. Unbalanced & Balanced Outputs. Adjustable TalkoverLine Inputs: 6 Phono Inputs: 2 Mic Inputs: 2 Unit Size: 4U Dimensions: 483 x 178 x 104mm Weight: 3.2Kg. A superior quality mixer for DJ's and installations where different music sources need to be mixed with ease. Line level signals and record decks can be connected. Each channel has gain and 3 band tone controls with kill on each of the 4 music channels. Two microphone inputs with 2 band EQ and automatic talkover with the choice of XLR or jack connections. A unique feature is the subwoofer output cutting down on the need for external active crossovers; the frequency point is adjustable and has a gain control on the rear panel to pre-set the volume before installation. The main output or music channel can be sent to the headphone output with the option of split or blend.. mixer-rack mount mixer-19"" mixer-channel monitoring mixer"
Price:  |
| Hill Audio PSM4530 8 Channel Mixer |
| "High Quality Multi Use Mixer. 3 Mic Input With Compressors. 3 Band Kill EQ. Talk Over. Subwoofer Output With Frequency Control. Send & ReturnLine Inputs: 8 Phono Inputs: 2 Mic Inputs: 3 Unit Size: 8U Dimensions: 483 x 308 x 104 Weight: 5.8Kg. A high end versatile mixer for operators who need a mixer for many applications. Suitable for DJ's- karaoke- small bands- solo performers and schools. Particularly useful for hire companies as the Hill PSM4530 has so many uses. There are 3 balanced mic inputs each with low- mid and high control- each input has an on/off switch and the facility to send & return for external effects units as well as an adjustable auto talk over. Five stereo input channels should be suitable for plenty of line or phono inputs- one channel has stereo line input with smooth 100mm dual rail faders making small adjustments in sound output easy. Each channel has tone controls with a 26db rotary kill. The selection of output options should suit all needs- with 1 main output comprising either XLR balanced or RCA unbalanced and a subwoofer balanced output with adjustment of frequency point. A main 2 output with XLR balanced outputs and RCA unbalanced with a switch that gives the opportunity to set this output as a mono or stereo output or alternatively a zone output with switchable high pass filter. All outputs have rear panel volume controls so if the unit is installed- unauthorised users cannot adjust volumes past the rear panels set volume. All in all a very nice unit with excellent sound dynamics and solid reliability.. mixer-rack mount mixer-19"" mixer-channel monitoring mixer"
Price:  |
| Hill Audio RPD-2200 Compressor Limiter |
| "Dual Dynamics Processor with Link Switch for Stereo Operation. Expander/Gate Section with Interactive Ratio- Variable Threshold. Automatic Peak Limiting Section. Separate 12-Segment LED Meters for In/Out Levels and Gain Reduction. Balanced Inputs and Outputs with ¬"" TRS and XLR Connectors. Full Metal Case with Detachable Rack EarsUnit Size: 1U Dimensions: 483 ž 45 ž 162mm Weight: 2.4Kg. The RPD-2200 is dual dynamics processor which can operate as two independent single units or can be linked for stereo signal treatment. It covers all dynamic processing requirements in studio recording and live sound- from compression over noise reduction to peak limiting and even offers specialty processing such as de-essing- contour filtering of low frequencies- dynamic enhancement to counteract high frequency loss- and a ""warmth"" function to add extra harmonic sonic content to the signal. To keep the use of the vast possibilities intuitive- some of the settings can be automated at the user's choice- like the ""auto-knee"" function which offers program-adaptive compression to combine the advantages of hard and soft-knee compression- and the ""auto-time"" function which sets suitable attack and release times automatically. For further clarity- all signal levels and gain reductions are visually displayed by precise LED meters. Being fully analog- the RPD-2200 works on an impressive 20dB headroom which sets it far apart from anything a digital dynamics processor could do. A side chain with switchable monitoring function completes the feature set of this truly versatile all-in-one processor.. Audio Compressor Limiter-Stereo Compressor Limiter"
Price:  |
| Hill Audio RPM-6600 Mixer/Splitter |
| 6 Mono Inputs/Outputs. XLR Connections for Inputs/Outputs 1-4. Jack Connections for Inputs/Outputs 5-6. Each Section can Work Independently in Mixer or Splitter Mode. 1 XLR Stereo Input with Level Control. 1 XLR Stereo Output with Level Control. The RPM-6600 is a versatile unit that can be used as a 6 channel mixer or a 6 channel splitter or a mix of both. Each channel has a switch to select mixer or splitter mode. In Splitter mode the channel output is fed from the master input- in mixer mode the corresponding channel is sent to the master output connectors. Each channel has a balance pot and volume control- 4 outputs are XLR and 2 are jack. A great problem solving unit for zone signal distribution- sub mixing keyboards on stage and much more.. AUDIO SPLITTER
Price:  |
| Hill Audio RPQ-2150 Dual 15 Band Equaliser |
| "2/3 Octave Stereo Graphic Equalizer. Adjustment from 20Hz to 16kHz in 15 Bands. Switchable Adjustment Range ñ6dB or ñ12Db. Additional Mono Subwoofer Output with Adjustable Crossover Frequency. Input Gain Controls for each Channel. Balanced Inputs and Outputs with 1/4? TRS and XLR Connectors. Detachable Rack EarsUnit Size: 1U Dimensions: 483 x 45 x 162mm Weight: 2.3Kg. The RPQ-2150 is a 2ž15 band stereo graphic EQ and the tool of choice to adapt a sound system to a given location or listening requirement. With every sound system offering a different tonal balance and every room providing different acoustic properties- certain frequencies might need boosting or attenuation to balance the sound- and this is what this unit does in perfection. In addition to the 2ž15 frequency bands (which allow adjustment in either a ñ6 dB or ñ12 dB range)- a 25Hz low-cut filter allows removal of very low-frequency content such as rumble and hum to preserve precious amplification headroom and keep the bottom end clear and punchy. Additional features include; A basic active crossover which is built-in allowing the direct connection of a subwoofer system- and the PeakID system visually warns of energy accumulations in certain frequency bands- indicating the danger of feedback. Unlike digital EQs- the RPQ-2150 works on a full +20dB maximum level range and hence offers superior headroom. This unit is an invaluable improvement to any professional sound system.. Stereo Equaliser-Audio Equaliser-19"" Stereo Equaliser-Dual Band Equaliser"
Price:  |
| Hill Audio RPS-1620 Rackmount Audio Mixer |
| "Multi-Purpose Sub/Monitoring/Summing-Mixer and Level Translator. 8 Balanced Stereo Line Inputs. Dedicated Balance and Level Controls. AUX Control (Pre-Volume) per Section with Master Send Control for Monitoring or Effects. AUX Send Signal Assignable to Phones Output. Individual Level Control for Left and Right Main Mix Signal. Balanced 1/4"" TRS Main Mix OutputsPower Supply: 115-230Vac- 50/60Hz Line Inputs: 8 Unit Size: 1U Dimensions: 483 x 45 x 162mm Weight: 2.46Kg. The RPS-1620 is a compact rack-mountable mixer with 8 stereo line input channels- perfectly suited as a submixer for stereo sources such as keyboards- sound modules and electronic drum kits. Thanks to its fully servo-balanced inputs- it works equally well in installed sound systems where balanced signals from greater distance need to be combined and even doubles as a level translator between +4 and -10dB- between which every input can be switched. Each dual-input channel sports individual balance and level controls- plus a double-function mute button which uses the mute indicator LED as a clip indicator when the respective channel is not muted. An AUX/Monitor bus (pre volume) is provided for monitoring or effect processor interfacing- to which each channel can contribute with adjustable level. The master section features separate left/right master volume controls and a master AUX send control- which can also be sent to the built-in headphone monitor section. Given its affordability and the high-headroom of 20dB thanks to the fully analog design- this mixer is a problem solver with almost unlimited applications.. Audio Mixer-19"" Rack Mixer-Rack Mount Mixer"
Price:  |
| Hill Audio RPX3400 Electronic Crossover |
| "Stereo 2-Way/3-Way/Mono 4-Way Active Crossover. Low/Mid Crossover Frequencies Adjustable in Two Switchable Ranges: 44 to 930 Hz and 440 Hz to 9.3 kHz; Mid/High Frequencies Adjustable 440 Hz to 9.3 kHz. Individual Limiters on Every Output. Balanced XLR Connectors for all Inputs and OutputsUnit Size: 1U Dimensions: 483 x 44 x 162mm Weight: 2.3Kg. The RPX-3400 is a stereo 2/3-way &pipe; mono 4-way active crossover- designed for better sound and protection by multi-amping a sound system. With a flip of the rear side switch- the unit can be configured either in stereo 2/3-way or mono 4-way mode- while the front panel status LEDs visualize which control has which function assigned. The incoming signal is divided into relative frequency bands via precise Linkwitz-Riley filters- which sport seamlessly adjustable crossover frequencies and offer the best driver protection by their steep 24dB/Octave slope. For further protection- 25 Hz Low-cut filters are fitted in both inputs to eliminate inaudible high-energy bass content- and limiters on all outputs are provided with central threshold control. LF driver misalignment is easily accounted for by the adjustable delay control- and the typical roll-off of constant directivity horns can be counteracted with a switchable filter. To make the best use of centrally located subwoofers- the LF outputs can be summed via the ""LF SUM"" function- making sure that in-phase signals from all subs deliver extra gain. Mute and Phase Invert switches for all outputs make troubleshooting a breeze. Compared to digital loudspeaker management systems- the RPX-3400 is not only more affordable- it also offers greater ease-of-use and a full 20dB signal headroom that only an analog processor can provide.. Electronic Crossover-Audio Crossover-19"" Rack Crossover"
Price:  |
| "Hill Audio SMA1020V2 Powered 10"" Speaker" |
| "Bi-Amplified Class D & Class AB Amplifers. 4 Channel Internal Mixer. Line & Mic Inputs. Master Volume Control & 2 Band Master EQ. 35mm Speaker Stand MountPower: 200W Response: 55Hz - 20kHz Dispersion: 120 x 60ø SPL: 122dB Dimensions: 327 x 490 x 300mm Weight: 11.5Kg. The Andante SMA1020V2 light-weight moulded speaker strikes the best balance between portability- sound and versatility- and even exceeds its predecessor by adding higher driver efficiency and improved amplifier cooling for extreme ruggedness. The stylish and sturdy Polypropylene (PP) cabinet offers fully recessed controls and connections for extended damage avoidance- and features a 35mm pole mount on its bottom and stacking points on its top. An in-built 4-channel mixer with master volume and EQ- multiple source connection options- and a unique stereo link mode crosses the border between an active speaker and a portable PA system- making the Andante V2 one of the most versatile choices available. The redesigned precision transducers and the hybrid power amp provide a real punch; all included in one compact package- available in three form factors. Whether it be conference- event- or presentation: this speaker will serve all your needs.. Active Speaker-10"" Active Speaker-10"" Speaker-10"" Loud Speaker-PA Speaker"
Price:  |
| "Hill Audio SMA1220V2 Powered 12"" Speaker" |
| Bi-Amplified with Class D & Class AB Amps. 4 Channel Internal Mixer. Line & Mic Inputs. Master Volume Control & 2 Band Master EQ. Pole Mount for 35mm TripodsPower: 300 Watts RMS Response: 50Hz- 20KHz Dispersion: 120 x 60ø Spl: 125db Dimensions: 385 x 576 x 347mm Weight: 15.25Kg. The Andante SMA1220V2 light-weight moulded speaker strikes the best balance between portability- sound and versatility- and even exceeds its predecessor by adding higher driver efficiency and improved amplifier cooling for extreme ruggedness. The stylish and sturdy Polypropylene (PP) cabinet offers fully recessed controls and connections for extended damage avoidance- and features a 35mm pole mount on its bottom and stacking points on its top. An in-built 4-channel mixer with master volume and EQ- multiple source connection options- and a unique stereo link mode crosses the border between an active speaker and a portable PA system- making the Andante V2 one of the most versatile choices available. The redesigned precision transducers and the hybrid power amp provide a real punch; all included in one compact package- available in three form factors. Whether it be conference- event- or presentation: this speaker will serve all your needs.. powered speaker
Price:  |
| "Hill Audio SMA1520V2 Powered 15"" Speaker" |
| Bi-Amplified with Class D & Class AB Amps. 4 Channel Internal Mixer. Line & Mic Inputs. Master Volume Control & 2 Band Master EQ. Pole Mount for 35mm TripodsPower: 400 Watts RMS Response: 45Hz- 20KHz Dispersion: 120 x 60 Spl: 126db Dimensions: 467 x 708 x 408mm Weight: 19.75Kg. The Andante SMA1520V2 light-weight moulded speaker strikes the best balance between portability- sound and versatility- and even exceeds its predecessor by adding higher driver efficiency and improved amplifier cooling for extreme ruggedness. The stylish and sturdy Polypropylene (PP) cabinet offers fully recessed controls and connections for extended damage avoidance- and features a 35mm pole mount on its bottom and stacking points on its top. An in-built 4-channel mixer with master volume and EQ- multiple source connection options- and a unique stereo link mode crosses the border between an active speaker and a portable PA system- making the Andante V2 one of the most versatile choices available. The redesigned precision transducers and the hybrid power amp provide a real punch; all included in one compact package- available in three form factors. Whether it be conference- event- or presentation: this speaker will serve all your needs.. powered speaker
Price: |
| Hill Audio Speaker Installation Patch Box |
| Max Power Handling: 2 x 100w or 1 x 200w Speaker Impedance: 8 Ohms Dimensions: 175 x 95 x 25mm Weight: 60g. A low impedance speaker installation patch box for removing the confusion of parallel and series speaker wiring. Top mounted configuration switches can be set to stereo mode with either 2x2 or 2x4 speakers- or a mono mode with eight speakers. For 16 speaker configurations- two patch boxes will be required. Speakers are connected to the patch box via Phoenix-style connectors that are included with each module. For installation purposes- the patch box is meant to be placed in the middle of a large speaker installation with speaker leads feeding out from the box and a feed from a power amplifier will run to the binding posts mounted on the side. The SPB-8420 is ideal for connecting eight 8Ohm speakers to one amplifier whilst maintaining a safe impedance level.. speaker-install speaker-bar speaker-full range speaker
Price:  |
| Hill Audio Wall Fitting Amp/Media Player with Bluetooth |
| Wall Mounting Amp. 80W Per Channel. Built-In Media Player. SD/USB- Tuner and Bluetooth. Microphone Output. 4 Line InputsMains Input: 230Vac Power 4 Ohms: 2 x 80W Power 8 Ohms: 2 x 50W Line Inputs: 4 Mic Inputs: 1 USB Inputs: 1 Dimensions: 450 x 261 x 44.5mm Weight: 6.1Kg. The IMA-202V2B is a wall-mount media amplifier- perfect for all locations where no rack space is available- like in small retail outlets or coffee shops. It combines MP3 replay- FM tuner reception and Bluetooth as music sources with a microphone input and a high-headroom power amplifier in one compact unit. Apart from its main output- an additional zone output is available. Depending on the application- the unit can be configured to either use the internal amplifier as a stereo amplifier and an external amplifier for the zone signal- or to use the internal amplifier as a dual mono unit- one for the main and one for the zone signal. A music on-hold output allows to feed the unit's music program into a telephone system. Adding the seamless integration with fire evacuation systems- the IMA-202V2B is the perfect all-in-one solution for applications with space limitations. Also available with additional built-in Bluetooth module as IMA-202V2B.. Audio Amplifier-Multi-Media Amplifier-PA Amplifier
Price:  |
| Hill Audio ZCP10A Wall Control Panel |
| Designed to Fit 86 x 86mm Surface Box. Cable Mounting Via Terminal Box. 41 Click Dial for Swift & Precise Volume ControlDimensions: 86 x 86mm Weight: 500g. A smart looking wall mounted panel for volume adjustment of PA systems generally found in public venues where an easy to reach volume control is necessary for staff to alter. The ZCP10A is easy to install thanks to simple cable termination and it is designed to fit in any standard 86x86mm surface mount box.. wall volume control-pa volume control
Price:  |
| Hill Audio ZPR2620 2 Zone Installation Mixer |
| Easy To Use Zone Mixer. Compact 1U Casing. 4 Microphone Inputs. 6 Line Inputs. 2 Band EQ For Main Output. Emergancy Input & Mute FacilityLine Inputs: 6 Mic Inputs: 4 Unit Size: 1U Dimensions: 483 x 44.5 x 183.5mm Weight: 2.2Kg. An easy to use installation mixer designed in the UK by Hill Audio. The ZPR2620 is a 1U two zone mixer for bars- restaurants- shops and gym installations. There are 6 music input channels; inputs 1 & 2 have an RCA line input on the rear panel with the option to switch them to microphone channels via a jack socket if required. Input 1 also has a 3.5mm jack input on the front for handy connections to MP3 players & phones etc. There are 2 dedicated mic inputs with a 2 band EQ using 1/4 jack plugs. The main output has volume control- bass & treble controls and can send either a balanced or unbalanced signal to suitable amplifiers. The zone output has volume control and the option of sending input channels 1-5 or the master volume via a mono balanced output to suitable amplifiers. This feature is handy for installations where either different music sources need to be routed to different rooms or just the overall sound level needs to be set at a lower level in one room. All music inputs & outputs have rear volume controls so settings can be set pre installation and once installed in a rack the volumes can't be tampered with. There is also a line input for emergency announcements which all allow all music to be muted when an announcement is made. A suitable relay alarm can also be connected so that music will mute when the alarm sounds.. ZONE MIXER
Price:  |
| Hook & Loop Dual Rolls - Black |
| Hook&Loop Dual Rolls. Sold in 25m Rolls. 20mm WideWidth: 20mm Roll Length: 10M. Supplied on dual 10 metre rolls- this black velcro tape is an invaluable aid when fixing grilles or covering material. Just staple one half to the unit and attach the other half to the grille- cloth etc. Tape width is 20mm-
Price:  |
| Hook Clamp With Shield |
| Strong Design. Shields Bar From Damage. Easy To FitSWL: :- :- 15kg Tube diameter:- 32-50mm. A strong clamp for securing equipment to 50mm bars. The clamp includes a shield that protects the supporting bar.
Price:  |
| Hook Clamp With Shield Black |
| Strong Design. Shields Bar From Damage. Easy To FitMax Load: :- :- 15kg Tube diameter:- 50mm. A strong clamp for securing equipment to 50mm bars. Includes shield.
Price:  |
| Horizontal Cross Bar 1.3-2.1m for Pipe & Drape System |
| Black- Anodised Aluminium Finish. Lightweight and Portable. Tool Free Setup with Secure Locking System. Telescopic Design Adjustable from 1.3m to 2.1mDimensions: 1300-2100 x 42mm Weight: 1.2Kg. This Aluminium Pipe and Drape system is designed for venue dressing- room partitioning and events- where a flexible- fast to rig system is required for supporting drapes- backdrops and starcloths. The cross bars are adjustable between 1.3-2.1m making them ideal for pre-made curtains.. Pipe and Drape System
Price:  |
| Horizontal Cross Bar 2.1-3.6m for Pipe & Drape System |
| Black- Anodised Aluminium Finish. Lightweight and Portable. Tool Free Setup with Secure Locking System. Telescopic Design Adjustable from 2.1m to 3.6mDimensions: 2100-3600 x 42mm Weight: 1.8Kg. This Aluminium Pipe and Drape system is designed for venue dressing- room partitioning and events- where a flexible- fast to rig system is required for supporting drapes- backdrops and starcloths. The cross bars are adjustable between 1.3-2.1m making them ideal for pre-made curtains.. Pipe and Drape System
Price:  |
| Horn Driver 30 Watts |
| "High Range Driver. Standard 35mm ThreadImpedance: :- 8 Ohms Power rating: :- :- 30 Watts RMS Frequency range: :- 4-1750Hz SPL::- :- 107 dB Weight: :- :- 0.56kg. A high range driver with a standard 35mm (1 3/8"") thread. Recommended crossover at 5kHz 12dB. For up to 200 watt systems with crossover."
Price:  |
