SpoofCard Caller ID Spoofing Calling Card
| "Trend WS Saw Tooth Forstner Drill Bit 1"" 1/8"" 1/2""" |
| "Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll a..."
Price: 33.95 |
| "Trend Modern Torus Router Cutter 35mm 39mm 1/2""" |
| "A popular variety, the Modern Torus skirting board mould. D: 35 mm C: 39 mm B: 16 mm R: 9.5 mm OL: 88 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 35 Dia Imperial: 1 3/8 Cut Length Metric: 39 Overall Length Metric: 88 B..."
Price: 72.95 |
| "Trend Replacement Cutter Bearings Metric OD 20mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 10.95 |
| "Trend CRAFTPRO Wood Cutting Cordless Saw Blade 190mm 24T 20mm" |
| "Non-stick PTFE coat to prevent resin build up and increase sawblade life. Sawblades designed for a professional finish in soft wood, hard wood, particle board, MDF and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip..."
Price: 15.95 |
| "Trend TCT Grooving Cutter 150mm 10mm 30mm" |
| "Hard wearing steel tool body complete with six tungsten carbide knives. Suitable for producing grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. Can be used with spacer rings for comb jointing..."
Price: 140.95 |
| "Trend Bull Nose Round Over Combination Router Cutter 38mm 19mm 12mm" |
| "Especially designed for routing Corian, and similar luxury inchmarble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20 and Ref. 90/28 with Ref. 90/21. D: 38 mm C: 19 m..."
Price: 55.95 |
| "Trend Solid Tungsten Carbide Mini Burrs 3mm 12mm 3mm" |
| "Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Has no bottom cut. ..."
Price: 18.95 |
| "Trend Finger Jointer Bearing Guided Router Cutter 24.6mm 18.5mm 1/4""" |
| "A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. D: 24.6 mm C: 18.5 mm OL: 58 mm B: 12.7 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 24.6 Cut Length Metric: 18.5 Overall Len..."
Price: 56.95 |
| "Trend Caravan Ind Guided Pierce and Trim Single Fliute Router Cutter 12.7mm 30mm 1/2""" |
| "Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted. D: 12.7 mm C: 30 mm OL: 89 mm Shank Diameter: 1/2 inch Shank Length: 34 mm Shank Diameter:..."
Price: 31.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 25mm 19mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 63/64 inch D: 25 mm C: 3/4 inch C: 19 mm OL: 59..."
Price: 19.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 42.7mm 22.3mm 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 70.95 |
| "Trend CRAFTPRO Bearing Guided Roman Ogee Router Cutter 6.3mm 22.2mm 1/4""" |
| "By raising the cutter, the top quirk is removed. D: 35 mm C: 25/32 inch C: 20 mm B: 9.5 mm R: 6.3 mm OL: 69.5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Cut Length Metric: 20 Cut Length Imperial: 25/32 Overall Length Metric: 69.5 ..."
Price: 38.95 |
| "Trend Lip and Spur Two Wing Machine Bit 25mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 51.95 |
| "Trend Bevel Cutter No Bearing Router Cutter 28mm 28mm 1/4""" |
| "Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. Ideal for use by wood turners with smaller routers to create staves on 25mm stock. For full bevels, template should be fitted to component. ..."
Price: 50.95 |
| "Trend Bearing Guided Ovolo and Round Router Cutter 34.9mm 18mm 8mm" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can ..."
Price: 42.95 |
| "Trend Shoulder Profile 6Mm Radius Router Cutter 27.5mm 6mm 1/4""" |
| "For door and window construction, decorative panelling and many other joinery applications. Designed for 35mm timber thicknesses. D: 27.5 mm C: 6 mm B: 9.5 mm R: 6 mm OL: 50 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 27.5..."
Price: 53.95 |
| "Trend Rota-Tip Bearing Guided Radius Router Cutter 12.7mm 13mm 1/4""" |
| "Single blade. Bearing allows groove to be routed to the template. Template thickness should be 10.0mm thicker than cut length. D: 12.7 mm C: 13 mm OL: 59 mm B: 12.7 mm Shank Diameter: 6.35 mm Shank Length: 31 mm Shank Diameter: 6.35 Dia M..."
Price: 34.95 |
| "Trend Replacement Cutter Bearings Metric OD 30mm" |
| "Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. OD: 30 mm ID: 12 mm Thickness: 5.9 mm Cut Length Metric: 5.9 Bearing Dia Metric: 30 Sawbore: 12..."
Price: 11.95 |
| "Trend CRAFTPRO Chamfer V Grovve Router Cutter 12.7mm 13mm 8mm" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. D: 1/2 inch D: 12.7 mm C: 1/2 inch C: 13 mm C2: 9 mm C3: 6 mm A: 45 degrees OL: 53 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 12.7 Dia Imperial: 1/2 Cut Leng..."
Price: 16.95 |
| "Trend Reed Edge No Bearing Router Cutter 19.1mm 25mm 1/4""" |
| "Decorative edge moulds for shelf edges. D: 19.1 mm C: 25 mm R: 2 mm R2: 6 mm OL: 64.1 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: 25 Overall Length Metric: 64.1 Radius 1 Metric..."
Price: 58.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/32 inch D: 12 mm C: 3/4 inch C: 19.1 mm OL: ..."
Price: 16.95 |
| "Trend Bull Nose Undercut Combination Router Cutter 54mm 20mm 1/2""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/20 inconjunction with Ref. 90/25. D: 54 mm C: 20 mm B: 28.57 mm R: 12.7 mm OL: 73..."
Price: 88.95 |
| "Trend Alucobond V Groove Router Cutter 18mm 13mm 1/4""" |
| "Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core. The v groove cutters rout into the cover and part of the core to allow folding of material by hand..."
Price: 46.95 |
| "Trend TCT Tapered Plug Cutter 19.1mm 1/2""" |
| "A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed of 3000 RPM (max. ..."
Price: 91.95 |
| "Trend CRAFTPRO Chamfer Bearing Guided Router Cutter 32mm 12.7mm 1/4""" |
| "Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. D: 32 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm A: 45 degrees OL: 62 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 32 Cut Length Metric: 12.7 Cut Length Imperi..."
Price: 24.95 |
| "Trend Large Bevel Panel Raiser Router Cutter 45mm 17mm 8mm" |
| "Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match ou..."
Price: 70.95 |
| "Trend CRAFTPRO Single Flute Router Cutter 6.3mm 19.1mm 1/4""" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. D: 1/4 inch D: 6.3 mm C: 3/4..."
Price: 11.95 |
| "Trend Classic Decorative Ogee Bearing Guided Router Cutter 25.4mm 16mm 1/4""" |
| "Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. D: 1 inch D: 25.4 mm C: 16 mm B: 9.5 mm B2: 12.7 mm R: 4 mm R2: 4 mm OL: 54 mm Shank Diameter: 1/4 in..."
Price: 44.95 |
| "Trend CRAFTPRO Round Over and Ovolo Router Cutter 31.7mm 15.9MM 1/2""" |
| "Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by ..."
Price: 36.95 |
| "Trend TCT Cylinder Boring Bit 203 Series 25mm" |
| "Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat..."
Price: 52.95 |
| "Trend Lip and Spur Two Wing Machine Bit 24mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 48.95 |
