|
| |
| "Trend TR35 x 1/2 TCT Biscuit Jointer Set 4.0 x 37.2mm" |
"Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 & 20. Dimensions: Shank: 1/2 in Cutting Diameter (D): 37. 2mm Cutting Length (C): 4. 0mm"
Price: 49.76
|
|
| "Trend TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm" |
"Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 & 20. Dimensions: Shank: 1/4in. Cutting Diameter (D): 37. 2mm Cutting Length (C): 4. 0mm"
Price: 49.76
|
|
| "Trend TR37 x 1/2 TCT Two Flute Cutter Long Shank 12 x 63mm" |
"Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications."
Price: 34.76
|
|
| "Trend TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm" |
"Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications."
Price: 26.18
|
|
| "Trend Kitchen Fitters Pack (5x TR17) TR/KPF/3" |
"Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications."
Price: 91.68
|
|
| "Trend Universal Sub Base C/w Pins & Bush" |
"The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers. Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch. Instructions for fitting The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available."
Price: 23.78
|
|
| "Trend UNI/CS Countersink" |
"Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals."
Price: 27.48
|
|
| "Trend Vari Jig Angle Guide VJSAG36" |
"The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0. 2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L."
Price: 79.06
|
|
| "Trend Worktop Scriber M/KWS01" |
"Gives offset between worktop jig and guide bush for ease of setting up. Allows true cutter path to be drawn. Scribes directly onto worktop. For 30 mm guide bush and 1/2 inch router cutter. Design Reg. No. 3014615."
Price: 25.96
|
|
| "Trend 45° Chamfer V-Groove Cutter" |
"Chamfer V grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1. 0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 27.55
|
|
| "Trend Radius Cutters" |
"These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards."
Price: 31.87
|
|
| "Trend 1/4in Single Flute Cutters TCT" |
"These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2. 0mm diameter and below should be a maximum of 1. 0mm per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks. Shank: 1/4in."
Price: 20.33
|
|
| "Trend 24/ Plug Makers" |
"These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1, 000-20, 000 /min."
Price: 49.13
|
|
| "Trend 1/4in Two Flute Cutters TCT" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 14.47
|
|
| "Trend 31/ Dovetail Cutters" |
"Trend dovetail cutters are designed for use with commercial dovetailing and stair housing jigs. Also cutters to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards, they are used extensively in cabinet work, furniture making, stair trenching, dovetail jointing and carcass construction."
Price: 29.56
|
|
| "Trend 1/4in Two Flute Cutters D-Namic Carbide" |
"Trend D-Namic two flute cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass."
Price: 28.55
|
|
| "Trend Bearing Guided Biscuit Jointers" |
"342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly."
Price: 61.62
|
|
| "Trend TCT Rebater" |
"These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip)."
Price: 52.38
|
|
| "Trend 90° Template Profilers" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 22.94
|
|
| "Trend 90° Shank Mounted Template Profilers" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 32.3
|
|
| "Trend Bearing Guided Ovolo & Round Over Cutters" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 40.68
|
|
| "Trend 45° Bearing Guided Chamfer Cutters" |
"These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 59.62
|
|
| "Trend 46/39 Bearing Guided Rebate Sets" |
"Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces . Tooling TCT. By changing the bearing the size of the rebate can be altered. Supplied with four bearings. 19 mm Bearing gives rebate of 7. 9 mm16 mm Bearing gives rebate of 9. 5 mm12. 7 mm Bearing gives rebate of 11. 1 mm9. 5 mm Bearing gives rebate of 13. 7 mm D = 35 mm C = 12. 7 mm"
Price: 67.49
|
|
| "Trend 46/8 90° Bearing Guided Triple Flute Cutter" |
"Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay."
Price: 30.18
|
|
| "Trend Countersink Sets" |
"These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key. They are designed to drill and countersink simultaneously a wide variety of materials."
Price: 18.55
|
|
| "Trend Countersinks" |
"Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals."
Price: 11.35
|
|
| "Trend Collet Sleeves" |
"Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work."
Price: 13.81
|
|
| "Trend Pin Guided Rounding Over Cutter" |
"Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters."
Price: 45.91
|
|
| "Trend Airshield Pro Powered Respirator" |
"The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Attachment points for optional ear defenders. Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8-hour Ni MH battery. Specifications: Rating: DIY/Craftsman/Professional. Airflow Min: 160 l/Min. Airflow fully charged: 200 1/Min. Size of headband: 52cm - 62cm. Motor sound level: 70 dB. Battery: 8-hours Ni MH battery. Weight: 995 g. Voltage: 230 volt. Eye protection: BS EN 166 (low energy impact).Respiratory protection: BS EN 12941 THP2(NPF50)."
Price: 34.68
|
|
| |
|
