|
| |
| "Trend 3/51 x 1/2 TCT Two Flute Cutter 9.5mm x 32mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 31.43
|
|
| "Trend 3/51 x 1/4 TCT Two Flute Cutter 9.5mm x 32mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 31.43
|
|
| "Trend 3/5 x 1/4 TCT Two Flute Cutter 9.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 25.57
|
|
| "Trend 3/6 x 1/2 TCT Two Flute Cutter 10.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 26.18
|
|
| "Trend 3/6 x 1/4 TCT Two Flute Cutter 10.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 26.18
|
|
| "Trend 36/19 x 1/2 TCT Strip Recesser 9.5 x 19 x 13 x 6mm" |
"These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip)."
Price: 52.38
|
|
| "Trend 3/7 x 1/4 TCT Two Flute Cutter 11.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 28.81
|
|
| "Trend 3/80 x 1/4 TCT Two Flute Cutter 12.7mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 25.57
|
|
| "Trend 3/8 x 1/4 TCT Two Flute Cutter 12.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 28.55
|
|
| "Trend 3/82 x 1/2 TCT Two Flute Cutter 12.7mm x 37mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 36.05
|
|
| "Trend 3/83D x 1/2 TCT Two Flute Cutter 12.7mm x 50mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 36.16
|
|
| "Trend 3/85 x 1/2 TCT Two Flute Cutter 12.7mm x 63mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 44.56
|
|
| "Trend 3/8L x 1/4 TCT Two Flute Cutter 12.0mm x 19mm" |
"Trend D-Namic two flute cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass."
Price: 28.55
|
|
| "Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 44.77
|
|
| "Trend 4/2 x 1/4 TCT Two Flute Cutter 16.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 28.19
|
|
| "Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 39.31
|
|
| "Trend 4/29 x 1/4 TCT Two Flute Cutter 18.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 39.31
|
|
| "Trend 4/30 x 1/2 TCT Two Flute Cutter 18.0mm x 50mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 55
|
|
| "Trend 4/60 x 1/4 TCT Two Flute Cutter 22.0mm x 19mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 31.43
|
|
| "Trend 46/07 x 1/4 TCT 90° Template Profiler 6.3 x 25.4mm" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 24.82
|
|
| "Trend 46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 62.86
|
|
| "Trend 46/130 x 1/2 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 50.52
|
|
| "Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 50.52
|
|
| "Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 52.38
|
|
| "Trend 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 62.24
|
|
| "Trend 46/17 x 1/2 TCT Bearing Guided Ovolo & Round Over 19.1mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 71.47
|
|
| "Trend 46/22 x 1/2 TCT 90° Template Profiler 18.2 x 50mm" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 73.32
|
|
| "Trend 46/38 x 1/2 TCT Bearing Guided Chamfer 45° 50 x 19mm" |
"These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 77.34
|
|
| "Trend 46/39 x 1/2 TCT Bearing Guided Rebate Set 35mm x 12.7mm" |
"Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces . Tooling TCT. By changing the bearing the size of the rebate can be altered. Supplied with four bearings. 19 mm Bearing gives rebate of 7. 9 mm16 mm Bearing gives rebate of 9. 5 mm12. 7 mm Bearing gives rebate of 11. 1 mm9. 5 mm Bearing gives rebate of 13. 7 mm D = 35 mm C = 12. 7 mm"
Price: 72.72
|
|
| |
|
