|
| |
| "Trend 46/39 x 1/4 TCT Bearing Guided Rebate Set 35mm x 12.7mm" |
"Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces . Tooling TCT. By changing the bearing the size of the rebate can be altered. Supplied with four bearings. 19 mm Bearing gives rebate of 7. 9 mm16 mm Bearing gives rebate of 9. 5 mm12. 7 mm Bearing gives rebate of 11. 1 mm9. 5 mm Bearing gives rebate of 13. 7 mm D = 35 mm C = 12. 7 mm"
Price: 67.49
|
|
| "Trend 46/7/50 x 1/4 TCT Bearing Guided Glazing Bar 10mm Radius" |
"Bearing guided glazing bar Ovolo jointing cutters. The glazing bar Ovolo cutter is bearing guided to speed setting up and to enable curved frames to be moulded. Shank: 1/4in. Tooling TC. R = 10mm. D = 28mm. C = 19mm. B = 12. 7mm."
Price: 71.47
|
|
| "Trend 46/82 x 1/2 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 38.1mm" |
"Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay."
Price: 63.61
|
|
| "Trend 46/90 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 25mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 47.12
|
|
| "Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 32.3
|
|
| "Trend 46/94 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 25.4mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 59.62
|
|
| "Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm" |
"Combination pierce and trim cutters. These cutters pierce and cut out aperture in laminate worktops. The base of the cutter acts as a guide follower. Single Flute cutters. Single Flute cutters. Cutting Length: 18mm, Diameter: 6. 3mm. Shank. 1/4in."
Price: 22.32
|
|
| "Trend 4/8 x 1/2 TCT Two Flute Cutter 25.4mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 45.28
|
|
| "Trend 50/05 x 1/4 HSSE Helical Plunge Bit 5mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 22.32
|
|
| "Trend 50/06 x 1/4 HSSE Helical Plunge Bit 6mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 24.95
|
|
| "Trend 50/06 x 8mm HSSE Helical Plunge Bit 6mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 20.33
|
|
| "Trend 50/08 x 8mm HSSE Helical Plunge Bit 8mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 18.34
|
|
| "Trend 6200/8 HS Countersink Set" |
"These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key. They are designed to drill and countersink simultaneously a wide variety of materials."
Price: 18.55
|
|
| "Trend 6200/8 TCT Countersink Set" |
"These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key. They are designed to drill and countersink simultaneously a wide variety of materials."
Price: 29.93
|
|
| "Trend 620/4WS Countersink" |
"Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals."
Price: 11.35
|
|
| "Trend 62/10 x 1/4 TCT Drill / Countersink / Counterbore" |
"These combination tools in TCT can be used in abrasive materials. They will drill, countersink and finally counterbore a parallel hole. Designed to receive plug maker group 24. The drill diameter sizes are for a clearance hole only. For use with drilling machines or routers. Specifications: T. C.T. 1/4in Shank. Woodscrew Size. No. 10. Drill Diameter 7/32in. Countersink Diameter. 12mm. Drill Length. 20mm."
Price: 55
|
|
| "Trend 63127 Collet Sleeve 6.35mm to 12.7mm" |
"Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work."
Price: 13.81
|
|
| "Trend 7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius" |
"Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters. Specifications: Tooling: T. C1/4in Shank. D =3/8 inch. D =9. 5 mm. D2=3. 2 mm. C =9 mm. R =2. 5 mm."
Price: 26.18
|
|
| "Trend 7E/2 x 1/4 TCT Pin Guided Round Over 6.3mm Radius" |
"Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters."
Price: 45.91
|
|
| "Trend 7E/3 x 1/4 TCT Pin Guided Round Over 8.0mm Radius" |
"Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters."
Price: 45.91
|
|
| "Trend 9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 54.35
|
|
| "Trend 9/72 x 1/2 TCT Bearing Guided Corner Bead Cutter 4.8 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 66.85
|
|
| "Trend 9/74 x 1/2 TCT Bearing Guided Corner Bead Cutter 9.5 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 78.55
|
|
| "Trend Airace Airshield" |
"Dust mask with replaceable filter for use when routing - for industrial and construction work, DIY and various other trades. It has a five times larger surface area than the average disposable dust mask, giving superior protection against dust inhalation and offering considerable cost savings. The one way exhaust valve vents to the underneath, preventing exhaled air from fogging goggles or the optional visor, this also ensures that the filter stays dry reducing filter clogging and prolonging its life. P2 electrostatic filter has approximately life of ten times that of average disposable facemask. Protects the user against hazardous toxic dust particles, metal fumes and mist to classification P2 and down to 0. 3 microns enabling use with MDF. Respiratory protection to BS EN143 P2."
Price: 36.86
|
|
| "Trend Anglefix Mitre Guide" |
"The Trend Anglefix Mitre Guide halves the angle for mitre joints and is ideal for mitre cutting of frames, skirting, architrave and beading as well as basic marking out. It halves angles to achieve correct cutting angle before cutting mitres and sets internal and external angles. Can be used with hand mitre and snip-off saws. Patent No. PCT WO 00/67969."
Price: 26.72
|
|
| "Trend AQ63/B/25 Aqua 63 Brown 25mm" |
"Aqua 63 style strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted, it is necessary to notch the seal end. Returns to original shape after compression. Stretching and shrink back at corners avoided. Suitable for all main timber Low compression force helps ease window and door operation. Maintains weathering characteristics and resists compression set over a wide temperature range +70° C to - 30° C. Research has proved that Aquamac TM Weatherseal gives high levels of sound reduction. Unaffected by paint stains, window and door types."
Price: 50.06
|
|
| "Trend B127 Replacement Bearing 1/2in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 7.36
|
|
| "Trend B16 Replacement Bearing 5/8in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.37
|
|
| "Trend B19 Replacement Bearing 3/4in Diameter 1/4in Bore" |
"Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure."
Price: 4.87
|
|
| |
|
