|
| |
| "Trend 46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 22.94
|
|
| "Trend 46/115 x 1/4 TCT Bearing Guided Ovolo & Round Over 1.6mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 40.68
|
|
| "Trend 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 49.13
|
|
| "Trend 4/6 x 1/2 TCT Two Flute Cutter 20.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 42.65
|
|
| "Trend 4/6 x 1/4 TCT Two Flute Cutter 20.0mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 42.65
|
|
| "Trend 46/150 x 1/2 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 62.24
|
|
| "Trend 46/160 x 1/2 TCT Bearing Guided Ovolo & Round Over 16mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 71.47
|
|
| "Trend 46/360 x 1/2 TCT Bearing Guided Chamfer 45° 35.1 x 12mm" |
"These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 71.47
|
|
| "Trend 46/92 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 19.1mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 38.68
|
|
| "Trend 46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm" |
"Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing."
Price: 35.41
|
|
| "Trend 4/80 x 1/2 TCT Two Flute Cutter 25.4mm x 37mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 56.39
|
|
| "Trend 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm" |
"Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12. 7mm. Cutting length: 19mm. Shank: 1/4in."
Price: 24.95
|
|
| "Trend C040 x 1/4 TCT Bearing Guided Rebater 35.0mm" |
"This cutter is self guiding and can be used to produce rebates, lapjoints, tongues and rebated corners. Alternative bearings can be purchased to vary the rebate. Diameter . 35. 0mm. C = 12. 7mm. E = 11. 1mm. B = 12. 7mm. T. C.T. 1/4IN Shank."
Price: 28.81
|
|
| "Trend C209 x 1/4 TCT Intumescent Recesser 24 x 10mm" |
"Trend Intumescent cutter set for either frame or door applications, with standard Intumescent Strip. It neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire and smoke. By using alternative ball bearing diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses. For 4. 0 mm thick and 10. 0 mm width intumescent strip. Diameter: 24 mm. Cutting depth: 10 mm. Bearing: 16 mm. Shank: 1/4in."
Price: 30.82
|
|
| "Trend CCC/KIT Cutter & Collet Care Kit" |
"This kit contains the essential accessories to maximise the life of cutters, collets and router. The kit comprises: 1 Mini diamond stone and water bottle. 4 brass brushes for cleaning collets. 1 P. T.F. E. dry lubricant spray. 1 Rust buster spray. 56 page booklet."
Price: 30.55
|
|
| "Trend SNAP/D/4 Drill Adaptor 1/8in Bore" |
"The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck."
Price: 4.55
|
|
| "Trend SNAP/MAG Magnetic Holder For Screws" |
"Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel. Supplied with one No 2 pozi bit."
Price: 11.41
|
|
| "Trend SNAP/PC10/Set Plug Cutter No10 Screw Set" |
"Plug cutter set. The set comprises Quick Chuck, Drill/Countersink, Pozi Screwdriver bit and standard Plug cutter"
Price: 33.18
|
|
| "Trend T46/01 x 1/2 TCT 90° Template Profiler 12.7 x 25mm" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 26.18
|
|
| "Trend SNAP/PC12/Set Plug Cutter No12 Screw Set" |
"Plug cutter set for No. 12 screw size. The set comprises Quick Chuck, Drill/Countersink, Pozi Screwdriver bit and standard Plug cutter"
Price: 36.7
|
|
| "Trend AIR STEALTH P3(R) Nuisance Filter 1 Off Pair" |
"Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC pleat encapsulated design provides 99. 99% filtration of airborne particles and aerosols at 0. 3 micron and above. High Efficiency Particulate Air Composite"
Price: 13.48
|
|
| "Trend Two flute cutter 12mm diameter" |
"Trend TR12X1/4TC Two flute cutter 12mm diameter Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. D= 15/32 inch D= 12 mm C= 19 mm OL= 70 mm Shank Diameter= 1/4 inch"
Price: 13.07
|
|
| "Trend 11/3 x 1/2 TCT V Groove Cutter 45° 9.2 x 19.1mm" |
"Chamfer V grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1. 0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 29.56
|
|
| "Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm" |
"Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank."
Price: 73.32
|
|
| "Trend 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm" |
"Trend 46/44 rebate set which include different size bearings for a choice of rebates, they provides easy setting up and accurate depth of cut. Ideal for rebating straight and shaped work pieces particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Tooling TCT. 1/4in Shank. By changing the bearing the size of the rebate can be altered, Supplied with 3 bearings. 22. 0 mm Bearing gives rebate of 1 mm. 19 mm Bearing gives rebate of 2. 5 mm. 16 mm Bearing gives rebate of 4 mm. D = 24 mm C = 12. 7 mm"
Price: 62.24
|
|
| "Trend CB38-532 TCT CB Counterbore" |
"The Trend CB counterbore is extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e. g 501/532 to 501/012."
Price: 37.92
|
|
| "Trend RT/3.5 TORX Replacement Screws" |
"Spare Torx Screws for replacement on Rotatip Cutters. Sizes. 04, 05, 06, 10, 11, 11m, 21, 12, 14, 7, 8, 15, 16, 17, 18, 19, 23 & 24."
Price: 3.67
|
|
| "Trend Air/Pro Airshield Pro Powered Respirator" |
"The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Attachment points for optional ear defenders. Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8-hour Ni MH battery. Specifications: Rating: DIY/Craftsman/Professional. Airflow Min: 160 l/Min. Airflow fully charged: 200 1/Min. Size of headband: 52cm - 62cm. Motor sound level: 70 dB. Battery: 8-hours Ni MH battery. Weight: 995 g. Voltage: 230 volt. Eye protection: BS EN 166 (low energy impact).Respiratory protection: BS EN 12941 THP2(NPF50)."
Price: 303.01
|
|
| "Trend SNAP/CS/6 Countersink with 3/32in Drill" |
"The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits."
Price: 7.27
|
|
| |
|
