|
| |
| "Trend 3/08 x 1/4 TCT Two Flute Cutter 12.7mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 26.18
|
|
| "Trend 3/60 x 1/2 TCT Two Flute Cutter 10mm x 35mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 39.31
|
|
| "Trend 46/02 x 1/4 TCT Roto Tip Bearing Guided Flush Trimmer 19 x 30mm" |
"Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of Tungsten Carbide than conventional tooling are rotated to expose a new cutting edge, ensuring the diameter of the tool remains constant. Blades are replaceable when all edges become chipped or dull. The Blades are fixed directly onto the tool bodies using Torx screws and may be replaced without removing the cutter from the router. All Rota-Tip cutters are supplied with blade(s) fitted and a Torx key. Tooling: T. C.T. 1/4in Shank. A Angle = 90° C = 12 mm D = 19 mm"
Price: 67.49
|
|
| "Trend SNAP/CS/10 Countersink with 1/8in Drill" |
"The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits."
Price: 7.27
|
|
| "Trend SNAP/CS/12 Countersink with 9/64in Drill" |
"The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits."
Price: 7.27
|
|
| "Trend SNAP/DBG/9 Centring Guide 9/64in Drill" |
"These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit."
Price: 10.63
|
|
| "Trend SNAP/PC/38 Plug Cutter 3/8in" |
"Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck."
Price: 12.77
|
|
| "Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank."
Price: 27.55
|
|
| "Trend 46/11 x 1/4 TCT Bearing Guided Ovolo & Round Over 3.2mm Radius" |
"Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile."
Price: 48.53
|
|
| "Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm" |
"Bearing guided rebate set for straight of curved work, this set is ideal for either stationary or portable routers. The standard rebate depth is 19. 1 mm (when using 12. 7 mm bearing) Available as extras are different size bearing which , when fitted, will give various rebate sizes. TCT 1/2in Shank. Diameter = 50. 8 mm Ccuuting length = 22. 5 mm Rebate = 19. 1mm & 15. 9mm"
Price: 84.55
|
|
| "Trend RB/A Replacement Blade (Walleted)" |
"Spare Rota-Tip Blades to suit Rota Tip Cutters. Length 29. 5 mm Width 9. 0 mm Thickness 1. 5 mm"
Price: 8.89
|
|
| "Trend 31/02 x 1/4 TCT Dovetail Cutter 103° 13.2 x 13mm" |
"Trend dovetail cutters are designed for use with commercial dovetailing and stair housing jigs. Also cutters to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards, they are used extensively in cabinet work, furniture making, stair trenching, dovetail jointing and carcass construction."
Price: 32.18
|
|
| "Trend 3/22 x 1/2 TCT Two Flute Cutter 6.3mm x 25mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 36.05
|
|
| "Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1mm x 37mm" |
"Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T. C.T. Tooling1/2in Shank."
Price: 45.91
|
|
| "Trend 46/37 x 1/4 TCT Bearing Guided Chamfer 45° 31.8 x 12mm" |
"These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery."
Price: 59.62
|
|
| "Trend 50/19 x 8mm HSSE Steel Helical Plunge Bit 5mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 28.19
|
|
| "Trend 50/51 x 8mm HSSE Helical Plunge Bit 8mm" |
"Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE. One Flute helical Plunge-slotting bit."
Price: 30.12
|
|
| "Trend 9/73 x 1/4 TCT Bearing Guided Corner Bead Cutter 7.0 Radius" |
"Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications."
Price: 74.09
|
|
| "Trend THP2 Filter Pack (Pair)" |
"The Trend Airshield Pro Respirator is a fully protected powered respirator for use with all woodworking applications and is suitable for use when machining MDF. It is approved to new standard BS EN 12941. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Attachment points for optional ear defenders. Strategic component distribution ensures optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8-hour Ni MH battery. Specifications: Rating: DIY/Craftsman/Professional. Airflow Min: 160 l/Min. Airflow fully charged: 200 1/Min. Size of headband: 52cm - 62cm. Motor sound level: 70 dB. Battery: 8-hours Ni MH battery. Weight: 995 g. Voltage: 230 volt. Eye protection: BS EN 166 (low energy impact).Respiratory protection: BS EN 12941 THP2(NPF50)."
Price: 34.68
|
|
| "Trend BSC/20/1000 Biscuits" |
"Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster and more precise. The biscuits are made of laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue)."
Price: 39.91
|
|
| "Trend C015 x 1/4 TCT Two Flute Cutter 9.5mm x 31.8mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 14.47
|
|
| "Trend C153 x 1/2 TCT Two Flute Cutter Worktop 12.7mm x 50mm" |
"Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are a TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4in."
Price: 17.11
|
|
| "Trend PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm" |
"The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with variable pitch of 29mm to 63mm. Use on timber, MDF, plywood and block board. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Work piece can be handled immediately after gluing and screwing, creating time saving benefits. No clamps required."
Price: 19.81
|
|
| "Trend SNAP/DBG/7 Centring Guide 7/64in Drill" |
"These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit."
Price: 10.63
|
|
| "Trend TR18D x 1/2 TCT Two Flute Cutter Long Shank 12.7 x 63mm" |
"Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications."
Price: 34.8
|
|
| "Weller 2012 Soldering Iron with Plug 12W 240 Volt" |
"The Weller 12 Watt 2012 Miniature Soldering Iron designed for soldering where a precision touch is essential. Reaches a temperature of approx 396°c. All connections are mechanically and electrically secure. Soldering irons have thermo-plastic handles for comfort and a safe grip. Complete with 0. 65mm nickel plated tip and iron rest. Specification Voltgae: 230/240 Volt. Input Power: 12W. Tip: T0054329699, TIP STT-1 SOLDER (Pack of 3).Weight: 195g."
Price: 22.81
|
|
| "Weller 2015 Soldering Iron with Plug 15W 240 Volt" |
"The Weller 15 Watt 2015 Miniature Soldering Iron designed for the electronic hobby enthusiast. Ideal for those delicate tasks requiring a little more power. All connections are mechanically and electrically secure. The soldering iron has a thermo-plastic handle for comfort and a safe grip. Complete with 2mm nickel plated tip and iron rest and a 3-pin plug. Specification Voltage: 230/240 Volt. Input Power: 15WTip: T0054329699, Tip STT-2 SOLDER (Pack of 3) Weight: 198g."
Price: 25.42
|
|
| "Weller 2020 Soldering Iron with Plug 20W 240 Volt" |
"The Weller 20W 2020 Miniature Soldering Iron designed for those precision tasks requiring more power. Reaches 492°C and is complete with 3. 5mm nickel plated tip and iron rest. Fitted with a mains cable complete with a moulded 13 amp fused plug. Specification Voltage: 230/240 Volt. Input Power: 20W. Tip: Tip STT-3 SOLDER (Packj of 3).Weight: 199g."
Price: 22.8
|
|
| "Weller CT2E7 Spare Tip 7mm for W201 370°C" |
"Weller straight chisel tip to fit W201 iron. Size: 7mm. Temperature Rating: 370ºC."
Price: 25.58
|
|
| |
|
