| "Trend Trend BSC/10/100 NO.10 Jointing Biscuits (Pack of 100)" |
| "A pack of 100 simple, easy to use and effective jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and accurate jointing of hard & soft woods, plywood and composition board, look no further."
Price: 9.59 |
| "Trend Trend DAR/200 - 200mm Digital Angle Rule" |
| "A 200mm digital angle rule that calculates angles quickly and accurately and is ideal for woodworking, construction, and machining."
Price: 25.19 |
| "Trend Trend DAF/8 8"" Digital Angle Finder" |
| "This angle finder features a large clear LCD display with digital readout to allow easy reading of angles. Calculates angles from 0-220 degrees. Up to 360 degrees when locking knob is removed."
Price: 43.99 |
| "Trend Trend Door Clamp" |
| "A clamp to hold open doors whilst drilling the holes for, and fitting, locks. Made from a lightweight non scratch solid steel and is suitable for firmly gripping doors up to 55mm thick. The clamp is padded to prevent floor and door damage."
Price: 26.39 |
| "Trend Trend Point - 2 - Point" |
| "An incredibly useful 'scissor' type measuring device that instantly & precisely locates evenly spaced positions for dowels, screws, biscuits, pins and for drilling holes."
Price: 26.39 |
| "Trend Trend 500mm Digital Angle Rule" |
| "Manufactured from durable and lightweight stainless steel this 500mm digital angle rule has a measuring capacity of 1000mm and 000.0 deg to 360.0 deg. It's easy to operate, with two press buttons and a digital read out this rule simply locks into place for ease of use."
Price: 44.39 |
| "Trend Trend Corner Chisel" |
| "A useful, hammer driven device that squares off corners on hinge recesses and routed corners in one swift & simple operation."
Price: 21.59 |
| "Trend Trend D/LIFT/B Door & Board Swivel Lifter" |
| "Ideal for carpenters, plasterers and drywall fixer this lifter allows up and down and side to side movement for easy positioning and fixing of door, panels and plasterboard."
Price: 21.98 |
| "Trend Trend Digital Depth Gauge" |
| "A digital depth gauge for horizontal and vertical measuring. For use on hand routers, router tables and saw benches. Also ideal for use with dovetail jig and mortise and tenon set ups."
Price: 29.99 |
| "Trend Trend 'Anglefix®' Mitre Guide" |
| "A very useful guide when cutting frames, skirting, architrave and beading and also for general marking out. The Angleflex® guide automatically halves angles to make cutting mitres simple, easy and ensuring accurate results."
Price: 26.39 |
| "Trend Trend Digital Level Box" |
| "Find the angle on a surface quickly and accurately. This level box features a magnetic base for hands free use - ideal for table or mitre saws."
Price: 20.39 |
| "Trend Trend Bradawl WP-HJ09 F" |
| "Replacement bradawl only for the Hinge Jig."
Price: 5.99 |
| "Trend Trend Universal Door Clamp & Stand" |
| "A mobile, solid steel stand that firmly holds a door on its edge so routing out hinge recesses and holes mortise for locks can be done easily.It features an anti-tilt non scratch base and enables the door to be tilted back to allow fitting into frame."
Price: 53.99 |
| "Trend Trend LOC/BLK/PK1 - Pack Of 4 Loc Block Workpiece Supports" |
| "Pack of four interlocking gripping blocks which lock together to allow the workpiece to be held in place when sanding, drilling and finishing."
Price: 18.98 |
| "Trend Trend 'Perfect Butt' Profile Copying & Scribe Tool" |
| "Trend's 'Perfect Butt' is a simple yet ingeniously elegant solution to an awkward problem faced by many woodworkers, tradesmen's & enthusiasts - scribing in work surfaces, floor & shelving etc. into awkward or oddly shaped areas. It quickly and accurately scribes profiles to ensure a perfect join between two uneven workpieces, everytime."
Price: 26.99 |
| "Trend Trend SNAP/DWIPH2/2 Snappy Drywall Depth Stops" |
| "A pack of two 25mm No. 2 Phillips 25mm insert bits with depth stop for drywall."
Price: 4.79 |
| "Trend Trend SNAP/MB/35TC Snappy Machine Bit" |
| "For drilling 35mmØ blind holes for circular hinges in kitchen and cabinet doors."
Price: 16.99 |
| "Trend Trend SNAP/HD/SET Snappy Hex Drill Set 7 Piece" |
| "A set of seven quick change hex shank through hole drilling timber."
Price: 10.94 |
| "Trend Trend SNAP/ND/8M Snappy 8mm A/F Nut Driver" |
| "Ideal for bolts this is a high quality magnetic nut driver."
Price: 9.55 |
| "Trend Trend PH/7X30/500C Pocket Hole Screws" |
| "Ideal for softer timbers, plywood and particle board as thread gives better holding power. Pack of 500 coarse thread square drive self tapping wood screws used with the PH/JIG. These screws feature a stylish wrap around design frame with curve lens for a snug, secure fit"
Price: 18.98 |
| "Trend Trend SNAP/ND/13M Snappy Nut Driver" |
| "A high quality magnetic nut driver 10mm."
Price: 10.94 |
| "Trend Trend SNAP/ND/13M Trend Snappy Nut Driver" |
| "A high quality magnetic nut driver 13mm."
Price: 13.15 |
| "Trend Trend NS/MAT/A Non-Slip Mat" |
| "Specifically formulated PVC gripping mat which holds work in place for woodworking applications without the need for clamps."
Price: 13.99 |
| "Trend Trend SNAP/FS/35 Snappy Forstner Bit" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes.D 35 mmOL 80 mmShank Diameter 1/4 inch hex"
Price: 22.01 |
| "Trend Trend SNAP/IPZ2/10 Trend Snappy Tin Coated Pz2 Bits" |
| "A pack of 25mm Pozi insert bits Titanium Nitride (TiN) coated."
Price: 10.22 |
| "Trend Trend SNAP/HD1/SET Snappy Hex Drill Set 16 Piece" |
| "Hex shank drill bit set in fabric tool holder for drilling wood, plastics and metals."
Price: 24.91 |
| "Trend Trend CLEAN/500 - 532ml Tool And Bit Cleaner" |
| "This easy to use tool and bit cleaner comes in a handy 532ml spray bottle and is the ideal cleaning solution for grubby tools and bits. The bio-degradable, non-toxic formula has unique properties which break the molecular bond and lifts the dirt from the tool, as opposed to eating away the dirt like citrus cleaners and other chemicals.The spray is ideal for various tools and bits including saw blades, wrenches, files and drill bits. Not only this, the solution also acts as a high grade lubricant and provides protection against corrosion, meaning this spray not only cleans your tools, it extends their lifespan too."
Price: 21.98 |
| "Trend Trend T5EB 1000W Plunge Router (230V)" |
| "A compact and powerful variable speed router. Suitable for routing light and medium duty woodworking applications with a 1/4” shank router cutter."
Price: 197.00 |
| "Trend Trend D/LIFT/A Door Lifter" |
| "Foot operated door lifter."
Price: 19.99 |
| "Trend Trend E/SCRIBE Easyscribe" |
| "Use for a multitude of applications including hanging doors, installing worktops, plinths & skirting, architraves, flooring, window boards, panelling, shop fitting and tiling."
Price: 31.99 |
