| Barnworth Engineered Golden Oak Lacquered Click Lok 189mm x 14/3mm Wood Flooring |
| Barnworth Engineered Golden Oak Lacquered 189mm x 14mm/3mm Wood Flooring.\n\n A fantastic Golden Oak engineered wood flooring. Each individual board is 189mm (18.9cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Barnworth Engineered Natural Oak Brushed and Oiled 190mm x 14/3mm Wood Flooring |
| Barnworth Engineered Natural Oak Brushed and Oiled 190mm x 14/3mm Wood Flooring\n\nA fantastic natural oak brushed and oiled engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the planks is 14mm (1.4cm), including a top 3mm layer of an oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Barnworth Engineered Natural Oak Rustic Aged Brushed and Oiled 190mm x 14/3mm Wood Flooring |
| A fantastic Barnworth Engineered Natural Oak Rustic Aged 190mm x 14mm/3mm Wood Flooring.\n\nEach individual board is 190mm (19cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed , meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Barnworth Engineered Natural Rustic Oak Brushed and Invisible Oiled 190mm x 14/3mm Wood Flooring |
| Barnworth Engineered Natural Rustic Oak Brushed & Oiled 190mm x 14mm/3mm Wood Flooring.\n\n A fantastic Natural Rustic Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Elite Engineered Natural Oak Brushed and Oiled 240mm x 15/4mm Wood Flooring |
| A fantastic Calder Elite Engineered Natural Oak Brushed and Oiled 240mm x 15/4mm Wood Flooring\n\nEach individual board is 240mm (2.4cm), the overall thickness of the planks is 15mm (1.5cm), including a top 4mm layer of an oak veneer. The wear layer enables you to sand down and refinish the surface up to 4 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so it can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Elite Engineered Smoked Oak Brushed and Lacquered 190mm x 20/6mm Wood Flooring |
| Calder Elite Engineered Smoked Oak Brushed and Lacquered 190mm x 20/6mm Wood Flooring\n\nA fantastic smoked oak brushed and lacquered engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Elite Engineered White Oak Brushed and Lacquered 190mm x 20/6mm Wood Flooring |
| Calder Elite Engineered White Oak Brushed and Lacquered 190mm x 20/6mm Wood Flooring\n\nA fantastic white oak brushed and lacquered engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered American Black Walnut Oiled 190mm x 20/4mm Wood Flooring |
| Calder Engineered American Black Walnut Oiled 190mm x 20/4mm Wood Flooring\n\nA fantastic walnut oiled engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the planks is 20mm (2cm), including a top 4mm layer of a walnut veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 4 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this walnut is mixed, meaning it will contain some knots as is typical with walnut products. \n\nThis engineered walnut would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Coffee Oak Distressed 150mm x 20/6mm Wood Flooring |
| Calder Engineered Coffee Oak Distressed 150mm x 20/6mm Wood Flooring\n\nA fantastic coffee oak distressed engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a Tongue and Groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Golden Wheat Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring |
| Calder Engineered Golden Wheat Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring\n\nA fantastic golden wheat oak brushed and lacquered engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Natural Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring |
| Calder Engineered Natural Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring\n\nA fantastic natural oak brushed and lacquered engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Natural Oak Brushed and Oiled 150mm x 10/2.5mm Wood Flooring |
| Calder Engineered Natural Oak Brushed and Oiled 150mm x 10/2.5mm Wood Flooring \n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 10mm (1cm), including a top 2.5mm layer of Oak veneer. The 2.5mm wear layer enables you to sand down and refinish the surface up to 1 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Natural Oak Lacquered 150mm x 14/3mm Wood Flooring |
| Calder Engineered Natural Oak Lacquered 150mm x 14/3mm Wood Flooring\n\nA fantastic natural oak lacquered engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 14mm (1.4cm), including a top 3mm layer of an oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered Natural Oak Oiled 150mm x 14/3mm Wood Flooring |
| Calder Engineered Natural Oak Oiled 150mm x 14/3mm Wood Flooring\n\nA fantastic natural oak oiled engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 14mm (1.4cm), including a top 3mm layer of an oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Calder Engineered White Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring |
| Calder Engineered White Oak Brushed and Lacquered 150mm x 20/6mm Wood Flooring\n\nA fantastic white oak brushed and lacquered engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the planks is 20mm (2cm), including a top 6mm layer of an oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 6 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a Tongue and Groove profile, so each board can simply be glued together. The grade of this oak is mixed, meaning it will contain some knots as is typical with oak products. \n\nThis engineered oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Almond Oak Lacquered 190mm x 20/6mm Wood Flooring |
| Caledonian Engineered Natural Oak Lacquered 190mm x 20mm/6mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Arran Oak Brushed and Oiled Click Lok 190mm x 14/3mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 190mm x 14mm/3mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Benmore Oak Brushed and Lacquered 125mm x 18/5mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Lacquered 125mm x 18mm/5mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 125mm (12.5cm), the overall thickness of the plank is 18mm (1.8cm), including a top 5mm layer of Oak veneer. The 5mm wear layer enables you to sand down and refinish the surface up to 4 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Brora Limed Oak Oiled 160mm x 20/6mm Wood Flooring |
| Caledonian Engineered Smoked Oak Oiled 160mm x 20mm/6mm Wood Flooring.\n\n A fantastic Smoked Oak engineered wood flooring. Each individual board is 160mm (16cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Cairnwell Oak Brushed and Oiled 150mm x 18/4mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 150mm x 18mm/4mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Oak veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Carron Oak Brushed and Oiled 190mm x 20/6mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 190mm x 20mm/6mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Drumochter Walnut Oiled 150mm x 18/4mm Wood Flooring |
| Caledonian Engineered Walnut Oiled 150mm x 18mm/4mm Wood Flooring.\n\n A fantastic Walnut engineered wood flooring. Each individual board is 150mm (1.5cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Walnut veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 4 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Walnut is mixed, meaning it will contain some knots as is typical with Walnut products. This engineered Walnut would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Easdale Oak Oiled Click Lok 150mm x 14/3mm Wood Flooring |
| Caledonian Engineered Natural Oak Oiled 150mm x 14mm/3mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Eden Oak Oiled 180mm x 20/6mm Wood Flooring |
| Caledonian Engineered Smoked Oak Oiled 180mm x 20mm/6mm Wood Flooring.\n\n A fantastic Smoked Oak engineered wood flooring. Each individual board is 180mm (18cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Esk Oak Brushed and Oiled 220mm x 20/6mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 220mm x 20mm/6mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 220mm (22cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Glenmore Oak Oiled 190mm x 20/6mm Wood Flooring |
| Caledonian Engineered Smoked Oak Oiled 190mm x 20mm/6mm Wood Flooring.\n\n A fantastic Smoked Oak engineered wood flooring. Each individual board is 190mm (19cm), the overall thickness of the plank is 20mm (2cm), including a top 6mm layer of Oak veneer. The 6mm wear layer enables you to sand down and refinish the surface up to 5 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Gulvain Smoked Oak Brushed and Lacquered 150mm x 18/4mm Wood Flooring |
| Caledonian Engineered Smoked Oak Brushed And Lacquered 150mm x 18mm/4mm Wood Flooring.\n\n A fantastic Smoked Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 18mm (1.8cm), including a top 4mm layer of Oak veneer. The 4mm wear layer enables you to sand down and refinish the surface up to 3 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Harris Oak Brushed and Oiled Click Lok 150mm x 14/3mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 150mm x 14mm/3mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
| Caledonian Engineered Iona Oak Brushed and Oiled Click Lok 125mm x 14/3mm Wood Flooring |
| Caledonian Engineered Natural Oak Brushed And Oiled 125mm x 14mm/3mm Wood Flooring.\n\n A fantastic Natural Oak engineered wood flooring. Each individual board is 125mm (12.5cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products. This engineered Oak would usually be fitted as a floating floor installation, where an underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator.
Price:  |
