| "Trend Snappy Forstner Drill Bit 16mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 16.95 |
| "Trend Professional Panel Trimming Saw Blade 250mm 80T 30mm" |
| "For fine super trimming of panels. These blades have a triple chip tooth design with a triple chip tooth design with a positive hook for super fine finish. These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered an..."
Price: 103.95 |
| "Trend Professional Wood Cutting Saw Blade 250mm 80T 30mm" |
| "These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. The bore is accurately reamed to ensure precise balance. Micro-granular carbide tips are used to give long lasting performance in a wide..."
Price: 105.95 |
| "Trend Snappy Forstner Drill Bit 35mm" |
| "High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precise holes in softwood and hardwood. Will also drill overlapping holes. Forged steel provides longer life..."
Price: 23.95 |
| "Trend Snappy Short Pozi Screwdriver Bit PZ2 17mm Pack of 3" |
| "Mini 17mm size No.2 Pozi bits for No.6, 8 & 10 screws. Three pack. Use with Trend Compact Angle Driver ref. SNAP/ASA/3. OL: 17 mm Size: No.2 Pozi Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 17 Type or Grade: ..."
Price: 4.49 |
| "Trend CRAFTPRO Nail Cutting Saw Blade 235mm 40T 30mm" |
| "Teeth have top and front bevel which allows the blade to cut more easily through the timber. Sawblades designed for a professional finish in soft wood & hard wood. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded secu..."
Price: 17.95 |
| "Trend Snappy Torx Screw Driver Bits T10 25mm Pack of 3" |
| "A pack of 25mm Torx insert bits High grade chrome-vanadium steel, through hardened to hardness HRC 59-61 and precision machined to exacting standards of accuracy. Suit all types of screw applications in trade and industry. Use on manual and machine a..."
Price: 5.49 |
| "Makita 14 Piece Hex Shank HSS TiN Drill Bit Set" |
| "1/4"" Hex shank HSS drill bits with a titanium nitride coating for longer lifetime and reduced friction. Supplied in storage pouch.Contents• 2mm • 2.5mm • 3mm • 3.5mm • 4mm • 4.5mm • 5mm &bu..."
Price: 35.95 |
| "Trend CRAFTPRO Aluminium and Plastic Cutting Saw Blade 216mm 64T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain tr..."
Price: 26.95 |
| "Trend Draining Board Groove Jig" |
| "For routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate. Provides a 0.5 degree fall. Grooves at 50mm pitch and 455mm long. Sight marks for lining up. Three remo..."
Price: 141.95 |
| "Trend Template Inlay Pig" |
| "Clear 6mm plastic inlay templates for use with inlay kit fitted to a plunge router. Inlay kit allows a shaped pocket and matching inlay patch to be routed easily with a router cutter to create perfect inlays. A Unibase may be required for certain mak..."
Price: 7.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15mm 32mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 1/4 inch C: 31.8 mm OL..."
Price: 18.95 |
| "Trend Solid Carbide Rasp Router Cutter 12.7mm 19mm 1/4""" |
| "Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). With twin roller bearings, is ideal for following a template bu. Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. D: 1/2 inch..."
Price: 81.95 |
| "Trend Bookcase Strip Rebate Router Cutter 9.5mm 13mm 1/4""" |
| "Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. D: 9.5 mm D2: 19 mm C: 13 mm C2: 6 mm OL: 47.6 mm Shank Diameter: 1/4..."
Price: 47.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12.7mm 50mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 12.7 mm C: 50 mm OL: 93.5 mm Shank Diameter: 1/2..."
Price: 25.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 6.35MM 25mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 19.95 |
| "Trend CRAFTPRO Weatherseal Groover Router Cutter 34mm 2.5mm 1/4""" |
| "Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to a..."
Price: 36.95 |
| "Trend Snappy HSS Festool Centrotec Drill Bit Guide Size 10" |
| "Festool Centrotec compatible shank fitting. Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment. Can be easily dismantled for cleaning and are supplied with a HSS drill bit. For sale in U..."
Price: 22.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 5mm 16mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 15.95 |
| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 63.5mm 25.4mm 1/2""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. D1: 63.5 mm C: 1 inches C: 25.4 mm B: 12.7 mm R1: 1 inches R1: 25.4 mm OL: 75 mm Shank Diame..."
Price: 68.95 |
| "Trend Slotter Blade for 1/4 Bore Arbor 36mm 5.5mm 1/4""" |
| "All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. D: 36 mm Kerf: 5.5 mm No. of Teeth: 2 Dia Metric: 36 Sawb..."
Price: 29.95 |
| "Trend Radiused Raised Panel Mould Router Cutter 50mm 22mm 1/2""" |
| "Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match ou..."
Price: 72.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 19mm 50mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15.0 mm C: 2 inch C: 50 mm OL: 89 mm Shank Diam..."
Price: 31.95 |
| "Trend CRAFTPRO Bearing Guided Bevel Router Cutter 25.4mm 12.7mm 8mm" |
| "Ideal for posts and newel caps for stairs. C: 1/2 inch C: 12.7 mm B: 9.5 mm A: 60 degrees OL: 63.5 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 25.4 Dia Imperial: 1 Cut Length Metric: 12.7 Cut Length Imperial: 1/2 Overall ..."
Price: 24.95 |
| "Trend Classic Roman Ogee Panel Router Cutter 25mm 15mm 1/2""" |
| ...
Price: 70.95 |
| "Trend CRAFTPRO Chamfer Bearing Guided Router Cutter 32mm 12.7mm 1/2""" |
| "Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. D: 32 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm A: 45 degrees OL: 60 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 32 Cut Length Metric: 12.7 Cut Length Imperi..."
Price: 28.95 |
| "Trend CRAFTPRO Ogee Panel Router Cutter 12.7mm 9.5mm 1/4""" |
| "Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. D: 1/2 inch D: 12.7 mm C: 3/8 inch C: 9.5 mm R: 2 mm OL: 50 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 ..."
Price: 24.95 |
| "Trend Snappy Step Reamer 3.5mm" |
| "Specially for use with Trend Snappy Taps fitted into torque control screwdrivers. Ideal for jig making. Suits 3 tap sizes. Shank Diameter: 1/4 inch hex Tap sizes: M3.5, M5, M8 Shank Diameter: 1/4 hex Type or Grade: for M3.5,M5,M8..."
Price: 26.95 |
| "Trend Waterfall Edge Bearing guided Router Cutter 25mm 16mm 12mm" |
| "Creates the waterfall edge on worktops. D: 25 mm C: 22 mm C2: 16 mm B: 19 mm R: 6 mm OL: 77 mm Shank Diameter: 12 mm Material thicknes: 13 mm Shank Diameter: 12 mm Dia Metric: 25 Cut Length Metric: 16 Overall Length Metric: 77 Bearing ..."
Price: 62.95 |
| "Trend Bull Nose Round Over Combination Router Cutter 27mm 12.5mm 1/4""" |
| "Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. D: 27 mm C: 12.5 mm B: 12.7 mm R: 8 mm OL: 52 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 27 C..."
Price: 56.95 |
| "Trend Chamfer V Groove Router Cutter 12.7mm 6.5mm 1/2""" |
| "Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. D: 12.7 mm C: 6.5 mm C2: 9 mm OL: 54 mm A: 45 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 12.7 Dia ..."
Price: 22.95 |
