| "Trend CRAFTPRO Rounding Over Router Cutter 15.9mm 13.5mm 8mm" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D: 5/8 inch D: 15.9 mm C: 13.5 mm R: 6.3 mm OL: 54 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 15.9 Dia Imperial: 5/8 Cut Length Metric: 1..."
Price: 18.95 |
| "Trend Replacement Cutter Bearings Metric OD 14mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 7.9mm 25.4mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 5/16 inch D: 7.9 mm C: 1 inch C: 25.4 mm Ol: 68..."
Price: 11.95 |
| "Trend Bearing Guided Bevel Trimmer Router Cutter 15.9mm 6.3mm 1/4""" |
| "Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. DIMENSIONS: D1: 5/8 inches D1: 15.9 mm C: 1/4 inches C: 6.3 mm OL: 53 mm B: 1/2 inches B: 12.7 mm A: 75 degrees Shank Diameter: 1/4 Shank..."
Price: 21.95 |
| "Trend Aluminium Spiral Upcut Non Ferrous Metal Router Cutter 9.5mm 25mm 3/8""" |
| "Two flute helical cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material sho..."
Price: 72.95 |
| "Trend Flat Ovolo Router Cutter 25mm 8mm 1/4""" |
| "Panel mould and edge mould cutter. D: 25 mm C: 8 mm R: 12 mm OL: 36.6 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 25 Cut Length Metric: 8 Overall Length Metric: 36.6 Radius 1 Metric: 12..."
Price: 40.95 |
| "Trend CRAFTPRO Wood Cutting Mitre Saw Blade 250mm 42T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ens..."
Price: 22.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6mm 16mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/64 inch D: 6 mm C: 5/8 inch C: 16 mm Ol: 60...."
Price: 9.95 |
| "Trend CRAFTPRO Bearing Guided Bevel Trimmer Router Cutter 34.9mm 10mm 1/4""" |
| "Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. D: 1 3/8 inch D: 34.9 mm C: 25/64 inch C: 10 mm A: 45 degrees OL: 50 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 34.9 Dia Imperial: 1 3/8 Cu..."
Price: 25.95 |
| "Trend Waterfall Edge Bearing guided Router Cutter 25mm 29mm 12mm" |
| "Creates the waterfall edge on worktops. D: 25 mm C: 29 mm C2: 24 mm B: 19 mm R: 6 mm OL: 83 mm Shank Diameter: 12 mm Material thickness: 19 mm Shank Diameter: 12 mm Dia Metric: 25 Cut Length Metric: 24 Overall Length Metric: 83 Bearing..."
Price: 67.95 |
| "Trend Snappy Hex Screwdriver Bit Hex 5mm 50mm Pack of 1" |
| "A 50mm hex screwdriver bit. High grade tool steel screwdriver bit, hardened for ultimate wear resistance. Metric sizes to suit KD furniture assembly. Overall length: 50 mm Size A/F: 5 mm for M6-M8 socket scw & M10 set scw & zipbolt Shank Diamete..."
Price: 4.49 |
| "Trend Aluminium UPVC Single Flute Helical Upcut Cutter 7mm 14mm 8mm" |
| "Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Mater..."
Price: 20.95 |
| "Trend Multi Reed Bearing Guided Router Cutter 20mm 20mm 1/2""" |
| "Ideal for shelves. Edge moulding applications only. D: 20 mm C: 20 mm B: 16 mm R: 2 mm OL: 48.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 20 Cut Length Metric: 20 Overall Length Metric: 48.5 Bearing Dia Metric: 16 Ra..."
Price: 65.95 |
| "Trend Roman Ogee Edge Mould Router Cutter 45mm 25.4mm 1/2""" |
| "Ideal for edging traditional picture frames, mirrors, clocks and plaques. D: 45 mm C: 1 inch C: 25.4 mm B: 12.7 mm R: 6 mm R2: 2 mm OL: 74.6 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 45 Cut Length Metric: 25.4 Cut Le..."
Price: 56.95 |
| "Trend CRAFTPRO Ogee Mould Bearing Guided Router Cutter 12.7mm 9.5mm 8mm" |
| "Supplied with extra 1/2 inch bearing for removing the lower quirk. D: 30.5 mm C: 1/2 inch C: 12.7 mm B: 9.5 mm B2: 12.7 mm R: 5 mm R2: 4 mm OL: 62 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Cut Length Metric: 12.7 Cut Length Imperia..."
Price: 36.95 |
| "Trend CRAFTPRO Rounding Over Router Cutter 12.7mm 9mm 8mm" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D: 1/2 inch D: 12.7 mm C: 23/64 inch C: 9 mm R: 4.8 mm OL: 51.5 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 12.7 Dia Imperial: 1/2 Cut Le..."
Price: 17.95 |
| "Trend Matchlining Bearing Guided Router Cutter Set 34mm 11mm 1/2""" |
| "A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Set Ref. 338 can be converted to Ref. 339, and vice-versa, by purchasing the respective groover. D2: 34 mm C: 11 mm C..."
Price: 118.95 |
| "Trend Snappy TCT Metric Screw Countersink and Depth Stop 6mm" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable short series HSS drill and non marring depth stop. This tool can be used in abrasive materials such as laminated chipboard. D: 1/2 inch D: 12.7 mm D2: ..."
Price: 28.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6.3mm 12.7mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/4 inch D: 6.3 mm C: 1/2 inch C: 12.7 mm Ol: 5..."
Price: 10.95 |
| "Trend CRAFTPRO Sash Bar Router Cutter 19.1mm 12.7mm 1/4""" |
| "Ovolo cutter designed for sash bars but useful for decorative edging. D: 3/4 inch D: 19.1 mm C: 1/2 inch C: 12.7 mm R: 6.3 mm OL: 53 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: ..."
Price: 35.95 |
| "Trend CRAFTPRO Wood Cutting Saw Blade 184mm 24T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip ..."
Price: 14.95 |
| "Trend CRAFTPRO Rounding Over Router Cutter 22.2mm 15mm 8mm" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D: 7/8 inch D: 22.2 mm C: 19/32 inch C: 15 mm R: 9.5 mm OL: 58 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 22.2 Dia Imperial: 7/8 Cut Len..."
Price: 22.95 |
| "Trend Staff Nosing Bead Router Cutter 19mm 6mm 1/4""" |
| "Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging. D: 19 mm C: 6 mm C2: 22 mm R: 3 mm OL: 54 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 19 Cut..."
Price: 57.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 20mm 20mm 1/2""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 23.95 |
| "Trend Slotter Blade for 12MM Bore 33/1 Arbor 50mm 5mm 12mm" |
| "These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. D: 50 mm Bore: 12 mm Kerf: 5 mm No. of Teeth: 4 Dia Metric: 50 Sawbore: 12 Saw Kerf Met..."
Price: 53.95 |
| "Trend Bearing Guided Rebater Router Cutter 35mm 12.7mm 8mm" |
| "Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces.When using bearing Ref. B95A, make two passes when a full depth of cut..."
Price: 61.95 |
| "Trend CRAFTPRO Chamfer V Grovve Router Cutter 12mm 11mm 1/4""" |
| "For veining, panelling, 'V' grooving, bevelling & chamfering. D: 1/2 inch D: 12.7 mm C: 7/16 inch C: 13 mm C2: 13 mm C3: 11 mm A: 60 degrees OL: 53 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 Cu..."
Price: 15.95 |
| "Trend Radius Bearing Guided Router Cutter 19mm 32mm 1/2""" |
| "Template thickness should be 5mm thicker than cut length of cutter. D: 19 mm C: 32 mm OL: 80 mm B: 19 mm R: 3/8 inch R: 9.5 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 19 Cut Length Metric: 32 Overall Length Metric: 80 ..."
Price: 56.95 |
| "Trend Router Drill Countersunk Counterbore 16mm 20mm 1/4""" |
| "For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance hole only. D: 16 mm D2: 6.3 mm C: 20 mm OL: 62..."
Price: 38.95 |
| "Trend CRAFTPRO Ogee Mould Router Cutter 27mm 16mm 8mm" |
| "For panel and veining work. Ideal for barley twists using the Routerlathe. D: 1 1/16 inch D: 27 mm C: 5/8 inch C: 16 mm R: 7.5 mm OL: 56 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 27 Dia Imperial: 1 1/16 Cut Length Metric..."
Price: 38.95 |
| "Trend Bearing Guided Radius Sunk Bead Router Cutter 20.7mm 4mm 1/4""" |
| "Cutters with guide bearing reduce setting up time for curved workpieces. D: 20.7 mm B: 12.7 mm R: 4 mm OL: 47 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 20.7 Overall Length Metric: 47 Bearing Dia Metric: 12.7 Bearing Di..."
Price: 53.95 |
