| "Trend CRAFTPRO Wood Cutting Mitre Saw Blade 216mm 24T 30mm" |
| "A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ens..."
Price: 16.95 |
| "Trend Replacement Cutter Bearings Metric OD 43mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 15.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 30mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 3/16 inch D: 30 mm C: 25 mm OL: 67 mm Shank D..."
Price: 40.95 |
| "Trend CRAFTPRO Intumescent Recesser Bearing Guided Router Cutter 40mm 10mm 1/2""" |
| "Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To suit 4mm thick strip of 10mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearin..."
Price: 40.95 |
| "Trend CRAFTPRO Small Ovolo Router Cutter 9.5mm 7.9mm 1/4""" |
| "A small beading cutter for fine decorative panelling, veining or rounding over. D: 3/8 inch D: 9.5 mm C: 5/16 inch C: 7.9 mm B: 9.5 mm R: 3.2 mm OL: 48 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 9.5 Dia Imperial: 3/8 ..."
Price: 17.95 |
| "Trend Leigh Dovetail Jig Router Cutter 20.5mm 32mm 1/2""" |
| "Cutter for use with the Leigh Dovetail Jig. These cutters have extra long shanks. D: 20.5 mm C: 32 mm OL: 83 mm A: 98 degrees Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 20.5 Cut Length Metric: 32 Overall Length Metric: 83 ..."
Price: 30.95 |
| "Trend Lip and Spur Two Wing Machine Bit 31mm" |
| "These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense mate..."
Price: 42.95 |
| "Trend Bearing Guided Radius Sunk Bead Router Cutter 24.7mm 6mm 1/4""" |
| "Cutters with guide bearing reduce setting up time for curved workpieces. D: 24.7 mm B: 12.7 mm R: 6 mm OL: 51 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 24.7 Overall Length Metric: 51 Bearing Dia Metric: 12.7 Bearing Di..."
Price: 59.95 |
| "Trend Threaded Arbor For M12 Bore Groover Blades 3/8""" |
| "Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be fitted a..."
Price: 12.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 32mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 15/32 inch D: 12 mm C: 1 1/4 inches C: 32 mm OL..."
Price: 16.95 |
| "Trend Bearing Guided Trimmer and V Groover Router Cutter 16mm 25.4mm 1/4""" |
| "Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. D: 16 mm D2: 12.7 mm C: 1 inch C: 25.4 mm B: 12.7 mm OL: 67 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 16 Dia2 Metric: 12.7..."
Price: 25.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 40mm 25mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1 37/64 inch D: 40 mm C: 25 mm OL: 66 mm Shank ..."
Price: 51.95 |
| "Trend CRAFTPRO Sash Bar Ovolo Router Cutter 25mm 20mm 1/4""" |
| "Designed for sash bar window construction. D: 25 mm C: 20 mm R: 10 mm OL: 60 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 25 Cut Length Metric: 20 Overall Length Metric: 60 Radius 1 Metric: 10..."
Price: 39.95 |
| "Trend STC Spiral Fast Downcut Aluminium Router Cutter 6.35MM 15.9mm 1/4""" |
| "Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in aluminium. Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. Super high polished cutting edge..."
Price: 50.95 |
| "Trend CRAFTPRO Rounding Over Router Cutter 12.7mm 9mm 8mm" |
| "For producing ovolo and rounding over edge moulds, using a side fence or back fence. D: 1/2 inch D: 12.7 mm C: 23/64 inch C: 9 mm R: 4.8 mm OL: 51.5 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 12.7 Dia Imperial: 1/2 Cut Le..."
Price: 17.95 |
| "Trend Bearing Guided Trimmer Router Cutter 12.7mm 16mm 1/4""" |
| "For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. D: 1/2 inch D: 12.7 mm C: 16 mm OL: 59 mm B: 12.7 mm OL: 58 mm Shank Diameter: 1..."
Price: 22.95 |
| "Trend CRAFTPRO One Piece Slotting Router Cutter 4mm 31.8mm 8mm" |
| "These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative bearing..."
Price: 20.95 |
| "Trend Snappy TCT Drill Countersinks Size 10" |
| "Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 1/8 ..."
Price: 13.95 |
| "Trend CRAFTPRO Radius Bearing Guided Router Cutter 34.9mm 19.1mm 1/2""" |
| "Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. D1: 34.9 mm C: 3/4 inches C: 19.1 mm B:..."
Price: 36.95 |
| "Trend Large Flat Roman Ogee Router Cutter 40mm 9mm 1/2""" |
| "Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. D: 40 mm C: 9 mm C2: 11 mm R: 22 mm R2: 4 mm OL: 58 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 40 Cut Length Metric: 9 ..."
Price: 78.95 |
| "Trend CRAFTPRO Router Dowel Drill 6mm 35mm 1/4""" |
| "Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Ref. C174 can be used with the Trend Shelf Support Template. For drilling machines or routers. D: 6 mm C: 35 mm OL: 70 mm Shank length: 30 mm Shank Diamete..."
Price: 15.95 |
| "Trend Vertical Panel Bevel Mould Router Cutter 28.5mm 38mm 1/2""" |
| "Shape similar to Ref. 18/80. Suitable panel mould for use with Ref. PSC/5 & PSC/50. D: 28.5 mm C: 38 mm A: 75 degrees OL: 76 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 28.5 Cut Length Metric: 38 Overall Length Metric: 76 ..."
Price: 78.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 10mm 19.1mm 8mm" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 25/64 inch D: 10 mm C: 3/4 inch C: 19.1 mm OL: ..."
Price: 14.95 |
| "Trend Two Flute PTFE Coated Non Stick Router Cutter 12.7mm 19mm 1/4""" |
| "Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTF..."
Price: 18.95 |
| "Trend Bearing Guided Overlap Trimmer Router Cutter 25.4mm 12.7mm 1/4""" |
| "Roughing cutter which leaves an overhang of 3mm, for secondary final trimming. Life can be extended by varying height of cutter. D: 12.7 mm C: 1 inch C: 25.4 mm B: 19 mm A: 90 degrees OL: 67 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4..."
Price: 34.95 |
| "Trend STC Ball End Spiral Router Cutter 6mm 25mm 6mm" |
| "Solid Carbide long reach with superior performance in 3-D carving. Ball end to give clean transition between depths. Two fluted up-cut spiral. D: 6 mm C: 25 mm OL: 75 mm Shank Diameter: 6 mm Shank Diameter: 6mm Dia Metric: 6 Cut Length Met..."
Price: 98.95 |
| "Trend CRAFTPRO Single Flute Router Cutter 3mm 11mm 1/4""" |
| "Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. D: 3 mm C: 11mm Shank Diamet..."
Price: 16.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 21mm 19mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 53/64 inch D: 21 mm C: 3/4 inch C: 19.1 mm OL:..."
Price: 15.95 |
| "Trend Hinge Boring Router Machine Bit 30mm 1/2""" |
| "These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. D: 30 ..."
Price: 54.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 6.3mm 16mm 1/4""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/4 inch D: 6.3 mm C: 5/8 inch C: 15.9 mm Ol: 5..."
Price: 9.95 |
| "Trend CRAFTPRO Two Flute Straight Router Cutter 15mm 32mm 1/2""" |
| "Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. D: 1/2 inch D: 12.7 mm C: 1 1/4 inch C: 31.8 mm OL..."
Price: 18.95 |
