| "Trend Digital Angle Rule 200mm" |
| "Digital angle rule with two 7 inch (200mm) stainless steel rules that can be used to calculate angles quickly and accurately and is ideal for woodworking, construction and machining. Digital display for angles. Stainless steel rule with metric/imperi..."
Price: 24.95 |
| "Trend Diamond Bench Stone Double Sided Fine/Coarse" |
| "A precision double-sided diamond bench stone 6 inches x 2 inches. Complete with cleaning block and non slip mat. Ex-fine 1000 grit (15 micron) and coarse 300 grit (50 micron). Guaranteed for five years when used with Trend Lapping Fluid. Recommended ..."
Price: 56.95 |
| "Trend 12 Assorted Fts Chisel Edge Guards" |
| "Chisel edge guards to protect from injury and damage. Sizes 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch. Two of each size. Pack of 12. Pack Qty: 12 pack..."
Price: 9.95 |
| "Trend Foot Operated Door Lifter" |
| "Foot operated lifter to support door while fitting into door frame. Foot operated freeing up the users hands. Slides under door and stays flat and stable until ready to activate the lift with users foot. Lifts door 38mm high and maximum weight 108 kg..."
Price: 22.95 |
| "Trend COMBI1002 Kitchen Worktop Jig" |
| "For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures. A single male and female template in 16mm solid laminate. Facility to join boards from 450mm to 1000mm wide. Facility to cut 22.5 degree mitre corners for hob un..."
Price: 360.95 |
| "Trend Snappy High Speed Step Drill Bit" |
| "High speed steel stepped drill. 4mm to 12mm diameter in 2mm increments. For drilling holes in sheet metal, plastic and for wood up to 5mm thick. D: 4 mm D2: 6 mm D3: 8 mm D4: 10 mm D5: 12 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4..."
Price: 33.95 |
| "Trend Snappy Stubby Wood Auger Bit 20mm" |
| "Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills. D: 20 mm OL: 105 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric:..."
Price: 7.95 |
| "Trend KWJ900 Kitchen Worktop Jig" |
| "Tradesman ALL IN ONE work top jig for up to 900mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm ra..."
Price: 193.95 |
| "Trend Snappy Stubby Wood Auger Bit 25mm" |
| "Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills. D: 25 mm OL: 105 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric:..."
Price: 9.95 |
| "Trend Replacement Bearing 28mm 8.9mm 8mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 15.95 |
| "Trend Replacement Bearing 35mm 11mm 15mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 15.95 |
| "Trend Replacement Bearing 1/2"" 3/16"" 3/16""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 5.49 |
| "Trend Replacement Bearing 5/8"" 3/16"" 1/8""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 9.95 |
| "Trend Replacement Bearing 28.2mm 3/16"" 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. sleeved and ca..."
Price: 9.95 |
| "Trend Replacement Bearing 1-1/8"" 5/16"" 1/2""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Replacement Bearing 14mm 5mm 3/16""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Replacement Bearing 3/4"" 3/16"" 1/8""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 10.95 |
| "Trend Replacement Bearing 5/8"" 5/32"" 3/8""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Replacement Bearing 22mm 6mm 1/2""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 16.95 |
| "Trend Replacement Bearing 3/4"" 3/16"" 3/16""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 8.95 |
| "Trend Replacement Bearing 1/2"" 11/64"" 1/8""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 8.95 |
| "Trend Snappy Stubby Wood Auger Bit 19mm" |
| "Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills. D: 19 mm OL: 105 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric:..."
Price: 7.49 |
| "Trend Snappy Stubby Wood Auger Bit 22mm" |
| "Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills. D: 22 mm OL: 105 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hex Dia Metric:..."
Price: 7.95 |
| "Trend Replacement Bearing 28mm 5mm 1/2""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 16.95 |
| "Trend Replacement Bearing 5/8"" 3/16"" 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 4.95 |
| "Trend Replacement Bearing 22mm 6mm 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Replacement Bearing 19mm 6mm 6mm" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 9.95 |
| "Trend Replacement Bearing 22mm 6mm 3/16""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend T11EK 1/2 Plunge Router 110v" |
| "With built in Quick Raiser fine adjuster. Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. Soft start eliminates sudden movement of machine on start up. Two column precision base with large..."
Price: 478.95 |
| "Trend Snappy Drill Countersink For Wood Screws Size 4" |
| "Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only. D: 3/8 inch D: 9.5 mm D2: 5/64 inch D2: 2 mm Shank Diameter: 1..."
Price: 7.95 |
| "Trend Replacement Bearing 41mm 10.6mm 12mm" |
| "Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. OD: 41 mm ID: 12 mm Thickness: 9 mm Cut Length Metric: 9 Bearing Dia Metric: 41 Sawbore: 12..."
Price: 16.95 |
