| "Trend Replacement Bearing 3/4"" 9/32"" 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 5.49 |
| "Trend Ovolo Shoulder Profile Router Cutter 33.5mm 9mm 1/4""" |
| "For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. D: 33.5 mm C: 9 mm B: 9.5 mm R: 9 mm OL: 53 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 33.5..."
Price: 61.95 |
| "Trend Replacement Bearing 5/8"" 3/16"" 3/16""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 6.95 |
| "Trend Replacement Bearing 20mm 5.9mm 1/4""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 11.95 |
| "Trend Snappy Taper Drill 3mm-7mm" |
| "For drilling and enlarging holes in all metals, plastics and timbers. Shank Diameter: 1/4 inch hex Plastics up to 2 mm thick Man-made boards & wood up to 6 mm thick Enlargement: 3 mm to 7 mm Shank Diameter: 1/4 hex Dia Metric: 7 Dia2 Metric:..."
Price: 23.95 |
| "Trend Replacement Bearing 24mm 5mm 1/2""" |
| "Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check t..."
Price: 10.95 |
| "Trend Plastic Case For Snappy Flip Set" |
| "Replacement plastic case for the SNAP/FLIP/SET. Tool contents not included. Tool contents not included...."
Price: 6.49 |
| "Trend Professional Two Flute Straight Router Cutter 24mm 19mm 8mm" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 61/64 inch D: 24 mm C: 19 mm OL: 50 mm Shank Diameter: 8 mm Shank Diameter..."
Price: 31.95 |
| "Trend Professional Two Flute Straight Router Cutter 25.4mm 19mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 1 inch D: 25.4 mm C: 19 mm OL: 60 mm Shank Diameter: 1/2 inch Shank Diamet..."
Price: 37.95 |
| "Trend Professional Two Flute Straight Router Cutter 50mm 25mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 1 31/32 inch D: 50 mm C: 25 mm OL: 63 mm Shank Diameter: 1/2 inch Shank Di..."
Price: 63.95 |
| "Trend Professional Two Flute Straight Router Cutter 8mm 25mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 5/16 inch D: 8 mm C: 25 mm OL: 57 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 8 Dia ..."
Price: 26.95 |
| "Trend Professional Two Flute Straight Router Cutter 9.5mm 25mm 3/8""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 3/8 inch D: 9.5 mm C: 25 mm OL: 63 mm Shank Diameter: 3/8 inch Shank Diame..."
Price: 26.95 |
| "Trend Router Guide Bush 22.2mm" |
| "Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 22.2 mm Outsi..."
Price: 11.95 |
| "Trend Professional Two Flute Straight Router Cutter 30mm 25mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 1 3/16 inch D: 30 mm C: 25 mm OL: 67 mm Shank Diameter: 1/2 inch Shank Dia..."
Price: 57.95 |
| "Trend Professional Two Flute Straight Router Cutter 2.5mm 8mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 2.5 mm C: 8 mm OL: 48 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 2.5 Cut Length Metr..."
Price: 19.95 |
| "Trend Professional Two Flute Straight Router Cutter 22mm 19mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 55/64 inch D: 22 mm C: 19 mm OL: 57 mm Shank Diameter: 1/2 inch Shank Diam..."
Price: 28.95 |
| "Trend Professional Two Flute Straight Router Cutter 12mm 63mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers. D: 12 mm C: 63 mm..."
Price: 40.95 |
| "Trend Professional Two Flute Straight Router Cutter 10mm 25mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 25/64 inch D: 10 mm C: 25 mm OL: 69 mm Shank Diameter: 1/2 inch Shank Diam..."
Price: 23.95 |
| "Trend Professional Two Flute Straight Router Cutter 6.3mm 25mm 3/8""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D: 1/4 inch D: 6.3 mm C: 25 mm OL..."
Price: 32.95 |
| "Trend Radius Router Cutter 10mm 18mm 8mm" |
| "For coves and part of a rule joint. D: 10 mm C: 18 mm R: 5 mm OL: 52 mm Shank Diameter: 8 mm Shank Diameter: 8 mm Dia Metric: 10 Cut Length Metric: 18 Overall Length Metric: 52 Radius 1 Metric: 5..."
Price: 34.95 |
| "Trend Professional Two Flute Straight Router Cutter 7mm 25mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 9/32 inch D: 7 mm C: 25 mm OL: 63 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 7 Dia ..."
Price: 23.95 |
| "Trend Professional Two Flute Straight Router Cutter 25mm 25mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 63/64 inch D: 25 mm C: 25 mm OL: 56 mm Shank Diameter: 1/4 inch Shank Diam..."
Price: 39.95 |
| "Trend Professional Two Flute Straight Router Cutter 14.3mm 25.4mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 9/16 inch D: 14.3 mm C: 25 mm OL: 69 mm Shank Diameter: 1/2 inch Shank Dia..."
Price: 31.95 |
| "Trend Professional Two Flute Straight Router Cutter 16mm 19mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 5/8 inch D: 16 mm C: 19 mm OL: 52 mm Shank Diameter: 1/4 inch Shank Diamet..."
Price: 25.95 |
| "Trend Radius Router Cutter 10mm 18mm 3/8""" |
| "For coves and part of a rule joint. D: 10 mm C: 18 mm R: 5 mm OL: 56 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 10 Cut Length Metric: 18 Overall Length Metric: 56 Radius 1 Metric: 5..."
Price: 25.95 |
| "Trend Professional Two Flute Straight Router Cutter 14mm 25mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 35/64 inch D: 14 mm C: 25 mm OL: 56 mm Shank Diameter: 1/4 inch Shank Diam..."
Price: 28.95 |
| "Trend Radius Router Cutter 25.4mm 15.9mm 1/2""" |
| "For coves and part of a rule joint. D: 1 inch D: 25.4 mm C: 5/8 inch C: 15.9 mm R: 1/2 inch R: 12.7 mm OL: 56 mm Shank Diameter: 1/2 inch Shank Diameter: 1/2 Dia Metric: 25.4 Dia Imperial: 1 Cut Length Metric: 15.9 Overall Length Met..."
Price: 56.95 |
| "Trend Professional Two Flute Straight Router Cutter 8mm 19mm 3/8""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 5/16 inch D: 8 mm C: 19 mm OL: 55 mm Shank Diameter: 3/8 inch Shank Diameter: 3/8 Dia Metric: 8 Dia ..."
Price: 22.95 |
| "Trend Professional Two Flute Straight Router Cutter 25mm 25mm 8mm" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 63/64 inch D: 25 mm C: 25 mm OL: 56 mm Shank Diameter: 8 mm Shank Diameter..."
Price: 31.95 |
| "Trend Professional Two Flute Straight Router Cutter 12mm 64mm 1/2""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. D: 15/32 inch D: 12 mm C: 2 1/2 inch C: 63 mm OL: 114 mm Shank Diameter: 1/2 in..."
Price: 38.95 |
| "Trend Professional Two Flute Straight Router Cutter 4.5mm 11mm 1/4""" |
| "TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. D: 4.5 mm C: 11 mm OL: 51 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 4.5 Cut Length Met..."
Price: 20.95 |
